Skip to content

1/14 Tracked Loader - Kitten 937

Main2.jpg 1/14 Tracked Loader - Kitten 937
03.jpg 1/14 Tracked Loader - Kitten 937
ripper.jpg 1/14 Tracked Loader - Kitten 937
multipurpose-bucket.jpg 1/14 Tracked Loader - Kitten 937
build-manual.jpg 1/14 Tracked Loader - Kitten 937
lift.jpg 1/14 Tracked Loader - Kitten 937
multi1.jpg 1/14 Tracked Loader - Kitten 937
01.jpg 1/14 Tracked Loader - Kitten 937
multi2.jpg 1/14 Tracked Loader - Kitten 937
suspension.jpg 1/14 Tracked Loader - Kitten 937
02.jpg 1/14 Tracked Loader - Kitten 937
multi3.jpg 1/14 Tracked Loader - Kitten 937
04.jpg 1/14 Tracked Loader - Kitten 937
05.jpg 1/14 Tracked Loader - Kitten 937
06.jpg 1/14 Tracked Loader - Kitten 937
07.jpg 1/14 Tracked Loader - Kitten 937
tracks.jpg 1/14 Tracked Loader - Kitten 937
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
3 files (TXT and ZIP) Close
  • ChangeLog v1.7.txt
  • Kitten 937 Metal Plated Update V1.01.zip
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Rockguard.stl
    • STL/Cabin/Cab Roof AC.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Belly Front.stl
    • STL/Chassis/Chassis Belly Middle.stl
    • STL/Chassis/Chassis Crossmember Tanks.stl
    • STL/Chassis/Chassis FR Arm Footsteps.stl
    • STL/Chassis/Chassis FR belly.stl
    • STL/Chassis/Chassis FR Middle.stl
    • STL/Chassis/Chassis FR motor Spacers.stl
    • STL/Chassis/Chassis FR Side.stl
    • STL/Chassis/Chassis FR SideM.stl
    • STL/Chassis/Chassis Main.stl
    • STL/Chassis/Chassis MainM.stl
    • STL/Chassis/Chassis Pendulum Mount.stl
    • STL/Chassis/Chassis Pendulum.stl
    • STL/Chassis/Chassis Rear Plate.stl
    • STL/Chassis/Chassis Rear Sides.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Hood2 Air Intake.stl
    • STL/Chassis/Hood2 Exhaust.stl
    • STL/Chassis/Hood2 mid.stl
    • STL/Chassis/Hood2 rear.stl
    • STL/Chassis/Hood2.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/LA Arm Railing.stl
    • STL/Lifting Arms/LA Arm.stl
    • STL/Lifting Arms/LA ArmM.stl
    • STL/Lifting Arms/LA BucketLink.stl
    • STL/Lifting Arms/LA Lifting Arms.stl
    • STL/Lifting Arms/LA Lifting Link.stl
    • STL/Lifting Arms/LA Pendulum Mount.stl
    • STL/Lifting Arms/LA Pendulum V2.stl
    • STL/Lifting Arms/LA Pendulum.stl
    • STL/Lifting Arms/LA SteelArm Mount.stl
    • STL/MultiBucket Variant2/Guard.stl
    • STL/MultiBucket Variant2/GuardV2.stl
    • STL/MultiBucket Variant2/R wall Mid A.stl
    • STL/MultiBucket Variant2/R wall Mid B.stl
    • STL/MultiBucket Variant2/R wall Side A.stl
    • STL/MultiBucket Variant2/R wall Side B.stl
    • STL/MultiBucket Variant2/Side A.stl
    • STL/MultiBucket Variant2/Side B.stl
    • STL/MultiBucket Variant2/Spacers.stl
    • STL/MultiBucket Variant2/Teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Running Gear/Drive Sprockets.stl
    • STL/Running Gear/motorCovers.stl
    • STL/Running Gear/RG inside.stl
    • STL/Running Gear/RG insideM.stl
    • STL/Running Gear/RG mid.stl
    • STL/Running Gear/RG midM.stl
    • STL/Running Gear/RG outside.stl
    • STL/Running Gear/RG outsideM.stl
    • STL/Running Gear/RG Sprocket Covers.stl
    • STL/Running Gear/RGfrontIdlers.stl
    • STL/Running Gear/RGtrackTensioners.stl
    • STL/Running Gear/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear/Roller Spacers Steel Chain.stl
    • STL/Running Gear/SteelChain Spacers.stl
    • Metal Plated Update Youtube.url
    • Metal files/DXF/v1 Arm.dxf
    • Metal files/DXF/v1 Belly Plate.dxf
    • Metal files/DXF/v1 Drive Sprocket.dxf
    • Metal files/DXF/v1 Lifting Cover.dxf
    • Metal files/DXF/v1 Main Chassis.dxf
    • Metal files/DXF/v1 Pendulum Link.dxf
    • Metal files/DXF/v1 Rear Plate.dxf
    • Metal files/DXF/v1 Roof Plate.dxf
    • Metal files/DXF/v1 Running Gear Inside.dxf
    • Metal files/DXF/v2 Lifting Motor Plate.dxf
    • Metal files/STEP/v1 Arm.stp
    • Metal files/STEP/v1 Belly Plate.stp
    • Metal files/STEP/v1 Drive Sprocket.stp
    • Metal files/STEP/v1 Lifting Cover.stp
    • Metal files/STEP/v1 Main Chassis.stp
    • Metal files/STEP/v1 Pendulum Link.stp
    • Metal files/STEP/v1 Rear Plate.stp
    • Metal files/STEP/v1 Roof Plate.stp
    • Metal files/STEP/v1 Running Gear Inside.stp
    • Metal files/STEP/v2 Lifting Motor Plate.stp
    • Metal files/DXF/v1 Running Gear Outside.dxf
    • Metal files/STEP/v1 Running Gear Outside.stp
  • Kitten 937v1.7 by burnie222rc.zip
    • HELP/What you need 3d printed Tracks.txt
    • HELP/What you need SCREWLIST.txt
    • HELP/What you need Steel Chains.txt
    • HELP/What you need.txt
    • STL/Buckets/Standard Bucket/Main.stl
    • STL/Buckets/Standard Bucket/teeth.stl
    • STL/Cabin/Cab AC.stl
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Front Middle.stl
    • STL/Chassis/Chassis Front Motorside.stl
    • STL/Chassis/Chassis Front MotorsideM.stl
    • STL/Chassis/Chassis Lower Front.stl
    • STL/Chassis/Chassis Lower Mid Rear.stl
    • STL/Chassis/Chassis Lower Mid.stl
    • STL/Chassis/Chassis Lower Rear.stl
    • STL/Chassis/Chassis Main Side.stl
    • STL/Chassis/Chassis Main SideM.stl
    • STL/Chassis/Chassis Rear sides.stl
    • STL/Chassis/Chassis Top Cab Brace.stl
    • STL/Chassis/Cylinder Shields.stl
    • STL/Chassis/Front Pendulum Mount.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Motor Spacers.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/BucketLink v1.stl
    • STL/Lifting Arms/Lifting Arms v1.stl
    • STL/Lifting Arms/lifting link v1.stl
    • STL/Lifting Arms/Pendulum Mount v1.stl
    • STL/Lifting Arms/Pendulum V1.stl
    • STL/Running Gear V2/RGfrontIdlers.stl
    • STL/Running Gear V2/RGtrackTensioners.stl
    • STL/Running Gear V2/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear V2/Roller Spacers Steel Chain.stl
    • STL/Running Gear V2/SteelChain Spacers.stl
    • STL/Running Gear V2/TrackPad.stl
    • STL/Running Gear V2/V2RGinside.stl
    • STL/Running Gear V2/V2RGinsideM.stl
    • STL/Running Gear V2/V2RGmid.stl
    • STL/Running Gear V2/V2RGmidM.stl
    • STL/Running Gear V2/V2RGoutside.stl
    • STL/Running Gear V2/V2RGoutsideCover.stl
    • STL/Running Gear V2/V2RGoutsideCoverM.stl
    • STL/Running Gear V2/V2RGoutsideM.stl
    • STL/Window Template.stl
    • Build Manual/Kitten 937 build Series Youtube.url
    • STL/Running Gear V2/steelChain Trackpad.stl
    • STL/Running Gear V2/steelChain Tracks x10.stl
    • STL/Running Gear V2/Drivesprocket B.stl
    • STL/Running Gear V2/Drivesprocket.stl
    • STL/Running Gear V2/motorCovers.stl
    • Build Manual/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Buckets/Multibucket/Actuator link.txt
    • STL/Buckets/Multibucket/sides.stl
    • STL/Buckets/Multibucket/Spacers.stl
    • STL/Buckets/Multibucket/teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Buckets/Multibucket/rWallMidDrvV2.stl
    • STL/Buckets/Multibucket/rWallMidPasV2.stl
    • STL/Buckets/Multibucket/rWallOutDrvV2.stl
    • STL/Buckets/Multibucket/rWallOutPasV2.stl
    • STL/Lifting Arms/ArmV2 A.stl
    • STL/Lifting Arms/ArmV2 Ains.stl
    • STL/Lifting Arms/ArmV2 B.stl
    • STL/Lifting Arms/ArmV2 Bins.stl
    • STL/Lifting Arms/ArmV2 Railing.stl
    • STL/Chassis/Front pendulum V2.stl

Learn more about the formats
Last update 2025-03-26 at 13:33
Publication date 2024-01-02 at 03:40
Design number 1681608
burnie222

burnie222

Certified
Issue with this design? Report a problem.

7 comments

Add a comment

7 comments

justinelijahp
justinelijahp

hello do you have a quick coupler for the 937k?
rbrucker
rbrucker

Hallo Lasse,
Ich habe mir gerade das Video von der CAT 973 K angesehen und wΓΌrde diese gerne bauen! Wirst du diese Dateien verΓΆffentlichen? Ich mΓΆchte sie gerne kaufen!
Viele Grüße aus Salzburg
Robert

burnie222
burnie222

Hello! Yes, the steel plated version will be ed soon :) it will be a free addon in the Kitten 937 files. :)

Delor
Delor

NNNNOOOOO I just finished the old one! Oh well it was fun building so lets build another :)
bondo3
bondo3

Hello Burnie do you have any discounts for return buyers I have three of your models.
thanks Don M [[email protected]]

burnie222
burnie222

yes, I do :) Sorry I didnt see your message until now! will send you an email
douPel
douPel

Somehow the multifunction bucket interfers with the lifting movement. When turning the bucked and arm all the way up, when I then lower the arm, the bucket hits the pendulums and then gets blocked and suddenly crashes down as if its pushed over a hump and freefalls. I already cleared the edge of the pendulums, which helped a bit. Basically, the distance between the bucked and pendulums is to short.

Am I the only one having this problem? Did I made a mistake somewhere?

burnie222
burnie222

Hello, this is the first time I have heard about this, I think something might be mounted wrong but I cant say for sure without seeing pictures :) If you want to share your problem in my facebook group "Burnie222rc's Designs - RC 1/14 Community" you will definately get help and we can find a solution!

douPel
douPel

Hello, I don't have facebook.
However, I rechecked everything to no avail. The only thing left was checking my new actuators. I had to get new ones, since one broke down and got 70N ones (30mm stroke). Thought it wouldn't matter. But it does. The new ones are only slightly longer, 4mm or so. But fully extended the 4mm extra causes the bucked to hit the pendulums. When setting the new actuators to the extended length of the 64N ones, it's all fine and working perfectly!
douPel
douPel

Hi Burnie,
After playing with it for a while in the garden, I appreciate the model even more. Its truelly a lot of fun to operate. Thanks a lot for your work!
I do find that the tracks are filling up with dirt, making it loose tracktion and slip. I use the 3d printed version (without the metal chain). Also more weight could help getting a full scoop (allthough it might very well be my limited operating skills). Mine weighs a bit over 5kg. There are several metal tracks on aliexpress. I was wondering if you have tried some by any chance?

Kind regards,
Pieter
andlaz
andlaz

Hello Burnie, thanks for the amazing model, i will be ing the others whenever i can commit to them :-) Just one question and a request- are the STLs oriented for FFF printing for outward/visible face quality and layer orientation for dealing with the right forces? I understand these trump optimizations but oh man, do i need to tune my s because everywhere they touch the first ed layer is a mess :-) And they are particularly sprawling in pieces like tracks, the motor cover, for track tensioners i wasn't even sure where the ended, and the piece began :-) I can't wait for SLS home printing to be affordable.

and the request is, would it be possible to reduce the variety of fasteners used a little bit in a future revision?

thanks!!
andras

ps: you should sell a hardware kit
douPel
douPel

Hi Burnie,

Thank you for this awesome model! I'm almost done printing and waiting for the last screws to arrive. It looks awesome and can't wait to start the actual build.

I was wondering if you have any suggestions for a soundkit? I thought maybe the soundkit for the double e ec160e would be an option. Do you by any chance know of other sound options?

Kind regards,
douPel

burnie222
burnie222

thank you for the message :) I hope you enjoy the build ! You can get most sound kits and mix them into both trackmotors. I can also suggest a servonaut kit, but it requires a servonaut dual-motor esc for this loader, and it is quite expensive :(

douPel
douPel

Thank you for your answer. I just saw your video of the beier with excavator sounds. I have one in my truck and am familiar with it. I totally forgot about getting sounds from youtube though! Its very versatile with loads of options. Guess thats the way to go :)

Wolle64
Wolle64

Hi, what Printing Material is used ? PLA, PLA+, PETG or what is your recommendation for the printing jobs. Have seen you modell today in live action and what should I say. GREAT. Keep going

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.