Skip to content

1/14 Kitten 703 Articulating Dump Truck

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
7 files (STL and ZIP) Close
  • 22x22 Dumpbed.zip
    • DB main A.stl
    • DB main B.stl
    • DB side DRV.stl
    • DB side PAS.stl
  • C2batteryTray.stl
  • Kitten 703 V2 5mm Lifted axles.zip
    • rearAxle v2.stl
    • Front axle cover v2.stl
    • Front Axle V2.stl
  • Kitten703 v1.2b by Burnie222rc.zip
    • BuildManual/CAT 730 Buildvideo.url
    • STL/Cabin/Cab cap.stl
    • STL/Cabin/Cab Door.stl
    • STL/Cabin/Cab Exhaust.stl
    • STL/Cabin/Cab Interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Mirrors.stl
    • STL/Cabin/Cab Railings.stl
    • STL/Cabin/Cab Rear.stl
    • STL/Cabin/Cab Rockshields.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Cabin/WindowTemplate.stl
    • STL/Dumpbed/DB front wall.stl
    • STL/Dumpbed/DB hinges.stl
    • STL/Dumpbed/DB main.stl
    • STL/Dumpbed/DB rear pieces.stl
    • STL/Dumpbed/DB side A.stl
    • STL/Dumpbed/DB side B.stl
    • STL/Dumpbed Tailgate/TG DRV.stl
    • STL/Dumpbed Tailgate/TG hinges.stl
    • STL/Dumpbed Tailgate/TG Main.stl
    • STL/Dumpbed Tailgate/TG PAS.stl
    • STL/Front Chassis/Choose Steering/Actuator Steering/Fch Front Axle Actuator.stl
    • STL/Front Chassis/Choose Steering/Actuator Steering/Fch Mid Actuator.stl
    • STL/Front Chassis/Choose Steering/Strong Steering/Fch Front Axle Strong Steering.stl
    • STL/Front Chassis/Choose Steering/Strong Steering/Fch Mid Strong Steering.stl
    • STL/Front Chassis/Choose Steering/Strong Steering/SS steering arm.stl
    • STL/Front Chassis/Fch Bellypan.stl
    • STL/Front Chassis/Fch Btm Swing.stl
    • STL/Front Chassis/Fch Catwalks DRV.stl
    • STL/Front Chassis/Fch Catwalks PAS.stl
    • STL/Front Chassis/Fch Frame DRV.stl
    • STL/Front Chassis/Fch Frame PAS.stl
    • STL/Front Chassis/Fch Front Grille orient 1.stl
    • STL/Front Chassis/Fch Front Grille orient 2.stl
    • STL/Front Chassis/Fch Front lights.stl
    • STL/Front Chassis/Fch Front sides.stl
    • STL/Front Chassis/Fch Frontbumper.stl
    • STL/Front Chassis/Fch Hood1.stl
    • STL/Front Chassis/Fch Hood2.stl
    • STL/Front Chassis/Fch Mudguards.stl
    • STL/Front Chassis/Fch Railing DRV.stl
    • STL/Front Chassis/Fch Railing PAS.stl
    • STL/Rear Chassis/Rch Axle.stl
    • STL/Rear Chassis/Rch bottom.stl
    • STL/Rear Chassis/Rch MainSwing.stl
    • STL/Rear Chassis/Rch middle.stl
    • STL/Rear Chassis/Rch PND inside.stl
    • STL/Rear Chassis/Rch PND outside.stl
    • STL/Rear Chassis/Rch Rear Frame.stl
    • STL/Rear Chassis/Rch top with Tailgate.stl
    • STL/Rear Chassis/Rch top without Tailgate.stl
    • STL/Rear Chassis/Rch top.stl
    • STL/Wheels/1x Hubs.stl
    • STL/Wheels/1x Wheels.stl
    • STL/Wheels/2x Hubs.stl
    • STL/Wheels/2x Wheels.stl
    • STL/Wheels/4x Hubs.stl
    • STL/Wheels/4x Wheels.stl
    • STL/Wheels/6x Hubs.stl
    • STL/Wheels/6x Wheels.stl
    • What you need/List of screws.txt
    • What you need/Parts List with links.txt
    • STL/Rear Chassis/Rch Main Frame.stl
    • STL/Front Chassis/Fch HoodV2 1.stl
    • STL/Front Chassis/Fch HoodV2 2.stl
  • Kitten703Electronics Schematic.zip
  • Kitten703StrongSteeringV2b.zip
    • STL/RearSwingbearing.stl
    • STL/Front Axle V2.stl
    • STL/SteeringLinks.stl
  • steering wheel.stl

Learn more about the formats
Last update 2025-02-23 at 21:49
Publication date 2023-08-26 at 16:46
Design number 1409625
burnie222

burnie222

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

EDIT:
23rd February 2025 - Updated recommended actuator information in the "what you need" list and HELP folders.
V1.3 to get the update.
17th December 2024 - Made a few changes on the StrongerSteering V2 files, the main Steering arm was interfering with the steering motor screwheads.
"Kitten703StrongSteeringV2b.zip" to get the update.
28th November 2024 - Added a better StrongerSteering upgrade with two paralel steering links. "Kitten703StrongSteeringV2.zip" to get the update!
5th June 2024 - Added a batterytray file.
6th february 2024 - Added V2 axles, these axles will lift the truck 5mm and move both rear axles about 8mm backward, to gain a more realistic look! NOTE: V2 axles will NOT work with a steering actuator! Only works with the Strong Steering option. "Kitten 703 V2 5mm Lifted Axles.zip" to get the new files!
Also updated two pages in the build manual!
2nd december 2023 - Added a better looking hood. the newest version v1.2 and find it in the Front Chassis folder. The STL files are named "HoodV2".
12th september 2023 - Fixed a small issue with the file "Rch Main Frame.stl" it had two studs that prevented the rear suspension to work properly. V1.1 to get the update.

Build yourself a hobbygrade Articulating Dump Truck.

Model Dimensions:
Length 75cm (25.5in), Width 21cm(8.2in), Height 25cm(9.8in).
This is a big dump truck, perfect for rough terrain. It has a fully working suspension, and a 6x6 driveline.

It is operated by 12v actuators and motors, which means you dont need hydraulics and oil.
Included in the zip file is all the STL files, a complete 53 page build manual, and a complete parts list with links and pictures of what you need in order to build this model.
The dumpbed can dump 12kg loads with ease.

You can choose between two steering options, one is super simple, and is one advanced and more efficient.
A tailgate for the dumpbed is also included in the files, putting it on is optional.

A complete build series of how I built mine can be seen in this link:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2Jh07l0oFISXkGNZhv6gVLf

Here is a video with a few clips of the ADT:
https://youtu.be/R-4rnIdH4GY

The model has a 22x22x22cm printer bed size version, as well as a 30x30x40cm printer size version.

I have tried my best at making all the parts as friendly as I possibly can. I even exported all the STLs in the best orientation for printing WITH premade brims, so you dont have to.
Runs on a 3S lipo battery.
For those who purchase this, Thank you! And I wish you happy building!!

3D printing settings

print all parts with atleast 3 walls, 15% infill and atleast 1mm thickness to top and bottom layers

Categories

Home

Meta tags

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.