Skip to content

1/14 Excavator Kitten 394

Main.jpg 1/14 Excavator Kitten 394
a.jpg 1/14 Excavator Kitten 394
manual.jpg 1/14 Excavator Kitten 394
b.jpg 1/14 Excavator Kitten 394
c.jpg 1/14 Excavator Kitten 394
d.jpg 1/14 Excavator Kitten 394
dimensions.jpg 1/14 Excavator Kitten 394
e.jpg 1/14 Excavator Kitten 394
electronics.jpg 1/14 Excavator Kitten 394
f.jpg 1/14 Excavator Kitten 394
g.jpg 1/14 Excavator Kitten 394
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (4 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • Kitten 394 DXF files V3.zip
    • Kitten 394 DXF files V2/Arms/Boom V5 Mirrored.dxf
    • Kitten 394 DXF files V2/Arms/Boom V5.dxf
    • Kitten 394 DXF files V2/Arms/Stick V5 Mirrored.dxf
    • Kitten 394 DXF files V2/Arms/Stick V5.dxf
    • Kitten 394 DXF files V2/Overcarriage/Floor plate with 90degree flanges.dxf
    • Kitten 394 DXF files V2/Overcarriage/Floor plate without 90degree flanges.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC349 bottom cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC349 top cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC352 bottom cover.dxf
    • Kitten 394 DXF files V2/Undercarriage/UC352 top cover.dxf
  • KittenE394 by Burnie222rcV1.6.zip
    • STLs/ArmsV5/boom cylinder motormount.stl
    • STLs/ArmsV5/boomA.stl
    • STLs/ArmsV5/boomB.stl
    • STLs/ArmsV5/boomC.stl
    • STLs/ArmsV5/boomOutA.stl
    • STLs/ArmsV5/boomOutAm.stl
    • STLs/ArmsV5/boomOutB.stl
    • STLs/ArmsV5/boomOutBm.stl
    • STLs/ArmsV5/boomOutC.stl
    • STLs/ArmsV5/boomOutCm.stl
    • STLs/ArmsV5/bucket cylinder motormount.stl
    • STLs/ArmsV5/BucketLinks.stl
    • STLs/ArmsV5/Cable Lead.stl
    • STLs/ArmsV5/cylcover.stl
    • STLs/ArmsV5/stick cylinder motormount A.stl
    • STLs/ArmsV5/stick cylinder motormount B.stl
    • STLs/ArmsV5/StickA.stl
    • STLs/ArmsV5/StickAm.stl
    • STLs/ArmsV5/StickB onepiece.stl
    • STLs/ArmsV5/StickB.stl
    • STLs/ArmsV5/StickBm.stl
    • STLs/Buckets/Ripper/STL/Ripper side A.stl
    • STLs/Buckets/Ripper/STL/Ripper side B.stl
    • STLs/Buckets/Slinger/STL/knife.stl
    • STLs/Buckets/Slinger/STL/rearwallA.stl
    • STLs/Buckets/Slinger/STL/rearwallB.stl
    • STLs/Buckets/Slinger/STL/sideA.stl
    • STLs/Buckets/Slinger/STL/sideB.stl
    • STLs/Buckets/Slinger/STL/teeth with brim.stl
    • STLs/Buckets/Slinger/STL/teeth without brim.stl
    • STLs/Buckets/Standard Bucket/rWallA.stl
    • STLs/Buckets/Standard Bucket/rWallB.stl
    • STLs/Buckets/Standard Bucket/sideA.stl
    • STLs/Buckets/Standard Bucket/sideB.stl
    • STLs/Buckets/Standard Bucket/teeth with premade brim.stl
    • STLs/Buckets/Standard Bucket/teeth.stl
    • STLs/Cabin/Cab door.stl
    • STLs/Cabin/Cab interior chair A.stl
    • STLs/Cabin/Cab interior chair B.stl
    • STLs/Cabin/Cab interior main.stl
    • STLs/Cabin/Cab main.stl
    • STLs/Cabin/Cab side.stl
    • STLs/Cabin/windshield wiper.stl
    • STLs/Overcarriage/air filter.stl
    • STLs/Overcarriage/Batterytray.stl
    • STLs/Overcarriage/Boommount drv.stl
    • STLs/Overcarriage/Boommount pas.stl
    • STLs/Overcarriage/catwalk cabin.stl
    • STLs/Overcarriage/catwalk plate A.stl
    • STLs/Overcarriage/catwalk plate B.stl
    • STLs/Overcarriage/catwalk plate C.stl
    • STLs/Overcarriage/counterweight.stl
    • STLs/Overcarriage/Exhaust high.stl
    • STLs/Overcarriage/Exhaust.stl
    • STLs/Overcarriage/fake cylinders.stl
    • STLs/Overcarriage/Hand Rails A.stl
    • STLs/Overcarriage/Hand Rails B.stl
    • STLs/Overcarriage/main chassis middle.stl
    • STLs/Overcarriage/main floor drv f.stl
    • STLs/Overcarriage/main floor drv r.stl
    • STLs/Overcarriage/main floor pas f.stl
    • STLs/Overcarriage/main floor pas r.stl
    • STLs/Overcarriage/mirrors.stl
    • STLs/Overcarriage/side drv f.stl
    • STLs/Overcarriage/side drv r grille.stl
    • STLs/Overcarriage/side drv r.stl
    • STLs/Overcarriage/side pas f cover.stl
    • STLs/Overcarriage/side pas f.stl
    • STLs/Overcarriage/side pas m.stl
    • STLs/Overcarriage/side pas r.stl
    • STLs/Overcarriage/swingmotor mount.stl
    • STLs/Overcarriage/top counterweight.stl
    • STLs/Overcarriage/top cover R 1.stl
    • STLs/Overcarriage/top cover R 2.stl
    • STLs/Overcarriage/top cover R 3.stl
    • STLs/Overcarriage/top cover.stl
    • STLs/Overcarriage/top motorcover A.stl
    • STLs/Overcarriage/top motorcover B 349.stl
    • STLs/Overcarriage/top motorcover B 352.stl
    • STLs/Overcarriage/top motorcover onepiece 349.stl
    • STLs/Overcarriage/top motorcover onepiece 352.stl
    • STLs/Undercarriage/RGDriveSprocket2.stl
    • STLs/Undercarriage/RGMainBeam349Front.stl
    • STLs/Undercarriage/RGMainBeam349Rear.stl
    • STLs/Undercarriage/RGMainBeam352Front.stl
    • STLs/Undercarriage/RGMainBeam352Rear.stl
    • STLs/Undercarriage/SlewRing hole Template.stl
    • STLs/Undercarriage/slewring stability piece.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro44.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro44B.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro54.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/3dTgro65.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/BottomRollers.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGChainTensioner.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGDriveSprocket.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGidlewheel.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGmid.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RGmidM.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/TopRollers.stl
    • STLs/Undercarriage/Undercarriage Steel chain/BottomRollers.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 44.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 53.stl
    • STLs/Undercarriage/Undercarriage Steel chain/chain Trackpad 64.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGChainTensioners.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGDriveSprocket.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGidlewheel.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGmid.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGmidM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearInside.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearInsideM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearOutside.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGRearOutsideM.stl
    • STLs/Undercarriage/Undercarriage Steel chain/TopRollers.stl
    • What you need/What you need 3d Printed Slewring.txt
    • What you need/What you need 3d printed Tracks.txt
    • What you need/What you need Screws.txt
    • What you need/What you need Steel Chains.txt
    • What you need/What you need Steel SlewRing.txt
    • What you need/What you need.txt
    • BuildManual/Watch Buildseries Youtube.url
    • STLs/Undercarriage/2x Steps.stl
    • STLs/3d printed Slewring/inside main 52t.stl
    • STLs/3d printed Slewring/inside top.stl
    • STLs/3d printed Slewring/outside bottom.stl
    • STLs/3d printed Slewring/outside mid.stl
    • STLs/3d printed Slewring/outside top.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontInsidev2.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontInsidev2M.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontOutsidev2.stl
    • STLs/Undercarriage/Undercarriage Steel chain/RGFrontOutsidev2M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontOutside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontOutside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearInside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearInside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearOutside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG RearOutside v2.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontInside v2 M.stl
    • STLs/Undercarriage/Undercarriage 3d printed tracks/RG FrontInside v2.stl
    • STLs/3d printed Slewring/swingmotor mount kitten394 V2.stl
    • BuildManual/Phase 2 Slewring/3d Printed slewring/Slewring Assembly youtube.url

Learn more about the formats
Last update 2025-03-03 at 12:22
Publication date 2023-11-26 at 03:53
Design number 1602951
burnie222

burnie222

Certified
Issue with this design? Report a problem.

Template info

3D model description

A Hydraulic Conversion for this excavator can be found here:
https://cults3d.sitegames.net/en/3d-model/home/kitten-e394-hydraulic-conversion

EDIT:
3rd March 2025: Modified and improved the Slewring motorplate for 3d printed slewring, to remove slop and to prevent the motor-bushing to loosen up. Also fixed a few files in the slewring buildmanual folder. V1.6 to get the update.
5th November 2024: The new DXF files had a mistake in the overcarriage folder, the filetype should now be correct. sorry about that. Added updated DXF files for lasercutting the steel plates.
27th October 2024: Added new and updated DXF files for lasercutting the steel plates.
"Kitten 394 DXF files V2.zip" to get them.
10th June 2024: The 3d printed Track's rubbed on the bottom of the undercarriage because the distance between the bearings was too big, this has now been fixed. (steel chain version is unaffected)
Files fixed in this update is in the "Undercarriage 3d printed tracks" folder. v1.5 to get the update!
26th March 2024: Fixed errors in a couple of files in the 3D Printed Tracks folder. "RGfrontInside.stl" and "RGfrontInsideM.stl" files. The first layer problems should now be fixed. V1.04 to get the update.
25th February 2024: Fixed a big problem with 4 files for the SteelChain undercarriage.
"RGFrontInside.stl", "RGFrontInsideM.stl", "RGFrontOutside.stl", and "RGFrontOutsideM.stl" interfered with the big idle wheel. this has now been fixed. V1.3 to get the update.
4th december 2023: Added the files for a 3d printed SlewRing. (I actually forgot to put those files in the zipfile) v1.2 to get the files.
3rd december 2023: Added two missing STL files for the undercarriage. (the two footsteps on the sides) v1.1 to get them.
2nd december 2023: Added 2d DWG and DXF files for the steel parts. and 3d STEP files for the steel parts. This is for the people who wants to have the steel parts machined or lasercut.

Build yourself a fully electric hobbygrade excavator.
The model is a 1/14th scale 50 ton class excavator.

Printable on a 22x22 buildplate!

Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.

100 page detailed build manual to provide as much information and help as I possibly can!

Customize your build with different options:
-Choose between two width's of the excavator with an additional option for Four different trackpad-widths!
-Choose between 3d printed tracks, or steel chain tracks!
-Two buckets and a ripper is included.

This has been a very big challenge for me to make availiable for everyone, I have tried my best at making all the parts as friendly as I possibly can.

You can also watch the entire build on youtube, and see how I built mine here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2L41c1OqEzcC3UIPebcdfgF

This project is a combination of 3d printing, and metal works. So you will need tools for cutting metal, and drill holes.
I will say that this is a very timeconsuming build, so youll need to be prepared to use some time on it.

You will need alot of different screws and hardware.

This Excavator model is compatible with the electric 40-70 ton quick coupler in my profile here:
https://cults3d.sitegames.net/en/3d-model/gadget/quick-coupler-40-70-ton-class

IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide.

Manufacturing settings

atleast 3 walls, 1,2 mm top and bottom thickness, 15% infill minimum.

Categories

Home

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.