Skip to content

1/10 RC Soviet BRDM-2 armored ambhipious vehicle

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • BRDM-2.zip
    • Auxiliary wheels/Arm spacer - 2x.stl
    • Auxiliary wheels/Auxiliary tyre half - 8x.stl
    • Auxiliary wheels/Auxiliary wheel half - 8x.stl
    • Auxiliary wheels/Auxiliary wheels servo cover - 2x.stl
    • Auxiliary wheels/Auxiliary wheels servo holder - 2x.stl
    • Auxiliary wheels/Control arm - 2x.stl
    • Auxiliary wheels/Inner arm - 4x.stl
    • Auxiliary wheels/Outer arm - 4x.stl
    • Auxiliary wheels/Servo cam - 2x.stl
    • BRDM-2 EN.pdf
    • Drive shafts/t - 4x.stl
    • Drive shafts/Main gear.stl
    • Drive shafts/Main shaft spacer.stl
    • Drive shafts/Main shaft.stl
    • Drive shafts/Shaft - 2x.stl
    • Drive shafts/U t A - 4x.stl
    • Drive shafts/U t B - 4x.stl
    • Front axle/CV t - 2x.stl
    • Front axle/CV roller - 2x.stl
    • Front axle/Front axle housing L - .stl
    • Front axle/Front axle housing R - .stl
    • Front axle/Front half shaft - 4x - .stl
    • Front axle/Half shaft spacer.stl
    • Front axle/Lower front axle - .stl
    • Front axle/Pinion gear shaft.stl
    • Front axle/Pinion gear.stl
    • Front axle/Ring gear.stl
    • Front axle/Track rod pad - 2x.stl
    • Front axle/Track rod.stl
    • Front axle/Upper front axle - .stl
    • Hull/Floor - .stl
    • Hull/Front floor.stl
    • Hull/Front upper hull.stl
    • Hull/Left rear side.stl
    • Hull/Left side.stl
    • Hull/Middle upper hull - .stl
    • Hull/Middle upper hull rim.stl
    • Hull/Nose.stl
    • Hull/Rear floor A.stl
    • Hull/Rear floor B.stl
    • Hull/Rear .stl
    • Hull/Rear upper hull.stl
    • Hull/Right rear side.stl
    • Hull/Right side.stl
    • Hull/Roof - Konkurs.stl
    • Hull/Roof - recon.stl
    • Hull detail/Air intake cover.stl
    • Hull detail/Engine cooling cover - 6x.stl
    • Hull detail/Engine cooling hatch.stl
    • Hull detail/Engine cooling intake - 6x.stl
    • Hull detail/Engine hatch 1.stl
    • Hull detail/Engine hatch 2.stl
    • Hull detail/Engine hatch hinge - 6x.stl
    • Hull detail/Exhaust cover - 2x.stl
    • Hull detail/Exhaust muffler L.stl
    • Hull detail/Exhaust muffler R.stl
    • Hull detail/Front blinker cover - 2x.stl
    • Hull detail/Front hatch - 2x - .stl
    • Hull detail/Front periscope.stl
    • Hull detail/Hatch hinge - 6x.stl
    • Hull detail/Headlight - 4x.stl
    • Hull detail/Headlight grille - 2x.stl
    • Hull detail/Headlight rim - 4x.stl
    • Hull detail/Hook - 3x.stl
    • Hull detail/Rear hook - 2x.stl
    • Hull detail/Side engine hatch - 2x.stl
    • Hull detail/Side rib long - 2x.stl
    • Hull detail/Side rib short - 4x.stl
    • Hull detail/Tail light - 2x.stl
    • Hull detail/Tail light rim - 2x.stl
    • Hull detail/Top hatch - 2x.stl
    • Hull detail/Top hatch inside part - 2x.stl
    • Hull detail/Trim vane - .stl
    • Hull detail/Trim vane arm - 4x.stl
    • Propeller/Propeler shaft bar.stl
    • Propeller/Propeller blade - .stl
    • Propeller/Propeller cover.stl
    • Propeller/Propeller shaft A - 2x.stl
    • Propeller/Propeller shaft B - 2x.stl
    • Propeller/Propeller shaft t - 2x.stl
    • Propeller/Propeller shaft.stl
    • Rear axle/Half shaft spacer.stl
    • Rear axle/Lower rear axle.stl
    • Rear axle/Pinion gear shaft.stl
    • Rear axle/Pinion gear.stl
    • Rear axle/Rear half shaft A - 2x.stl
    • Rear axle/Rear half shaft B - 2x.stl
    • Rear axle/Ring gear.stl
    • Rear axle/Upper rear axle.stl
    • Steering/Steering arm - .stl
    • Steering/Steering screw cover.stl
    • Steering/Steering servo holder.stl
    • Suspension/Leaf spring 1 - 4x.stl
    • Suspension/Leaf spring 2 - 4x.stl
    • Suspension/Leaf spring 3 - 4x.stl
    • Suspension/Leaf spring 4 - 4x.stl
    • Suspension/Leaf spring 5 - 4x.stl
    • Suspension/Leaf spring 6 - 4x.stl
    • Suspension/Leaf spring bracket - 4x.stl
    • Suspension/Spring pad - 4x.stl
    • Transmission/Gear 1.stl
    • Transmission/Gear 2.stl
    • Transmission/Gear 3.stl
    • Transmission/Gear 4.stl
    • Transmission/Gear 5.stl
    • Transmission/Motor gear.stl
    • Transmission/Shaft 1.stl
    • Transmission/Shaft 2.stl
    • Transmission/Shaft 3.stl
    • Transmission/Shaft 4.stl
    • Transmission/Shaft 5.stl
    • Transmission/Transmission case 1.stl
    • Transmission/Transmission case 2.stl
    • Transmission/Transmission case 3.stl
    • Turret traverse/Traverse servo holder 1.stl
    • Turret traverse/Traverse servo holder 2.stl
    • Turret traverse/Turret traverse gear.stl
    • Turrets/9P148 Konkurs turret/Launcher - 5x.stl
    • Turrets/9P148 Konkurs turret/Launcher arm.stl
    • Turrets/9P148 Konkurs turret/Launcher base.stl
    • Turrets/9P148 Konkurs turret/Launcher cradle A.stl
    • Turrets/9P148 Konkurs turret/Launcher cradle B.stl
    • Turrets/9P148 Konkurs turret/Turret bottom.stl
    • Turrets/Reconnaissance turret/Cradle bearing L.stl
    • Turrets/Reconnaissance turret/Cradle bearing R.stl
    • Turrets/Reconnaissance turret/Cradle.stl
    • Turrets/Reconnaissance turret/Heavy MG half - 2x.stl
    • Turrets/Reconnaissance turret/Light MG half - 2x.stl
    • Turrets/Reconnaissance turret/Turret body.stl
    • Turrets/Reconnaissance turret/Turret bottom.stl
    • Turrets/Turret rim.stl
    • Wheels/Rim A - 4x.stl
    • Wheels/Rim B - 4x.stl
    • Wheels/Tyre - 4x.stl
  • BRDM-2.zip
    • Auxiliary wheels/Arm spacer - 2x.stl
    • Auxiliary wheels/Auxiliary tyre half - 8x.stl
    • Auxiliary wheels/Auxiliary wheel half - 8x.stl
    • Auxiliary wheels/Auxiliary wheels servo cover - 2x.stl
    • Auxiliary wheels/Auxiliary wheels servo holder - 2x.stl
    • Auxiliary wheels/Control arm - 2x.stl
    • Auxiliary wheels/Inner arm - 4x.stl
    • Auxiliary wheels/Outer arm - 4x.stl
    • Auxiliary wheels/Servo cam - 2x.stl
    • BRDM-2 CZ.pdf
    • BRDM-2 EN.pdf
    • Drive shafts/t - 4x.stl
    • Drive shafts/Main gear.stl
    • Drive shafts/Main shaft spacer.stl
    • Drive shafts/Main shaft.stl
    • Drive shafts/Shaft - 2x.stl
    • Drive shafts/U t A - 4x.stl
    • Drive shafts/U t B - 4x.stl
    • Front axle/CV t - 2x.stl
    • Front axle/CV roller - 2x.stl
    • Front axle/Front axle housing L - .stl
    • Front axle/Front axle housing R - .stl
    • Front axle/Front half shaft - 4x - .stl
    • Front axle/Half shaft spacer.stl
    • Front axle/Lower front axle - .stl
    • Front axle/Pinion gear shaft.stl
    • Front axle/Pinion gear.stl
    • Front axle/Ring gear.stl
    • Front axle/Track rod pad - 2x.stl
    • Front axle/Track rod.stl
    • Front axle/Upper front axle - .stl
    • Hull/Floor - .stl
    • Hull/Front floor.stl
    • Hull/Front upper hull.stl
    • Hull/Left rear side.stl
    • Hull/Left side.stl
    • Hull/Middle upper hull - .stl
    • Hull/Middle upper hull rim.stl
    • Hull/Nose.stl
    • Hull/Rear floor A.stl
    • Hull/Rear floor B.stl
    • Hull/Rear .stl
    • Hull/Rear upper hull.stl
    • Hull/Right rear side.stl
    • Hull/Right side.stl
    • Hull/Roof - Konkurs.stl
    • Hull/Roof - recon.stl
    • Hull detail/Air intake cover.stl
    • Hull detail/Engine cooling cover - 6x.stl
    • Hull detail/Engine cooling hatch.stl
    • Hull detail/Engine cooling intake - 6x.stl
    • Hull detail/Engine hatch 1.stl
    • Hull detail/Engine hatch 2.stl
    • Hull detail/Engine hatch hinge - 6x.stl
    • Hull detail/Exhaust cover - 2x.stl
    • Hull detail/Exhaust muffler L.stl
    • Hull detail/Exhaust muffler R.stl
    • Hull detail/Front blinker cover - 2x.stl
    • Hull detail/Front hatch - 2x - .stl
    • Hull detail/Front periscope.stl
    • Hull detail/Hatch hinge - 6x.stl
    • Hull detail/Headlight - 4x.stl
    • Hull detail/Headlight grille - 2x.stl
    • Hull detail/Headlight rim - 4x.stl
    • Hull detail/Hook - 3x.stl
    • Hull detail/Rear hook - 2x.stl
    • Hull detail/Side engine hatch - 2x.stl
    • Hull detail/Side rib long - 2x.stl
    • Hull detail/Side rib short - 4x.stl
    • Hull detail/Tail light - 2x.stl
    • Hull detail/Tail light rim - 2x.stl
    • Hull detail/Top hatch - 2x.stl
    • Hull detail/Top hatch inside part - 2x.stl
    • Hull detail/Trim vane - .stl
    • Hull detail/Trim vane arm - 4x.stl
    • Propeller/Propeler shaft bar.stl
    • Propeller/Propeller blade - .stl
    • Propeller/Propeller cover.stl
    • Propeller/Propeller shaft A - 2x.stl
    • Propeller/Propeller shaft B - 2x.stl
    • Propeller/Propeller shaft t - 2x.stl
    • Propeller/Propeller shaft.stl
    • Rear axle/Half shaft spacer.stl
    • Rear axle/Lower rear axle.stl
    • Rear axle/Pinion gear shaft.stl
    • Rear axle/Pinion gear.stl
    • Rear axle/Rear half shaft A - 2x.stl
    • Rear axle/Rear half shaft B - 2x.stl
    • Rear axle/Ring gear.stl
    • Rear axle/Upper rear axle.stl
    • Steering/Steering arm - .stl
    • Steering/Steering screw cover.stl
    • Steering/Steering servo holder.stl
    • Suspension/Leaf spring 1 - 4x.stl
    • Suspension/Leaf spring 2 - 4x.stl
    • Suspension/Leaf spring 3 - 4x.stl
    • Suspension/Leaf spring 4 - 4x.stl
    • Suspension/Leaf spring 5 - 4x.stl
    • Suspension/Leaf spring 6 - 4x.stl
    • Suspension/Leaf spring bracket - 4x.stl
    • Suspension/Spring pad - 4x.stl
    • Transmission/Gear 1.stl
    • Transmission/Gear 2.stl
    • Transmission/Gear 3.stl
    • Transmission/Gear 4.stl
    • Transmission/Gear 5.stl
    • Transmission/Motor gear.stl
    • Transmission/Shaft 1.stl
    • Transmission/Shaft 2.stl
    • Transmission/Shaft 3.stl
    • Transmission/Shaft 4.stl
    • Transmission/Shaft 5.stl
    • Transmission/Transmission case 1.stl
    • Transmission/Transmission case 2.stl
    • Transmission/Transmission case 3.stl
    • Turret traverse/Traverse servo holder 1.stl
    • Turret traverse/Traverse servo holder 2.stl
    • Turret traverse/Turret traverse gear.stl
    • Turrets/9P148 Konkurs turret/Launcher - 5x.stl
    • Turrets/9P148 Konkurs turret/Launcher arm.stl
    • Turrets/9P148 Konkurs turret/Launcher base.stl
    • Turrets/9P148 Konkurs turret/Launcher cradle A.stl
    • Turrets/9P148 Konkurs turret/Launcher cradle B.stl
    • Turrets/9P148 Konkurs turret/Turret bottom.stl
    • Turrets/Reconnaissance turret/Cradle bearing L.stl
    • Turrets/Reconnaissance turret/Cradle bearing R.stl
    • Turrets/Reconnaissance turret/Cradle.stl
    • Turrets/Reconnaissance turret/Heavy MG half - 2x.stl
    • Turrets/Reconnaissance turret/Light MG half - 2x.stl
    • Turrets/Reconnaissance turret/Turret body.stl
    • Turrets/Reconnaissance turret/Turret bottom.stl
    • Turrets/Turret rim.stl
    • Wheels/Rim A - 4x.stl
    • Wheels/Rim B - 4x.stl
    • Wheels/Tyre - 4x.stl
    • UPGRADE- Belt transmission/Belt transmission.pdf
    • UPGRADE- Belt transmission/Main pulley.stl
    • UPGRADE- Belt transmission/Motor pulley.stl
    • UPGRADE- Belt transmission/Propeler shaft bar.stl
    • UPGRADE- Belt transmission/Propeller blade - BELT - .stl
    • UPGRADE- Belt transmission/Propeller shaft A - BELT 2x.stl
    • UPGRADE- Belt transmission/Propeller shaft B - 2x.stl
    • UPGRADE- Belt transmission/Propeller shaft t - 2x.stl
    • UPGRADE- Belt transmission/Propeller shaft.stl
    • UPGRADE- Belt transmission/Pulley A.stl
    • UPGRADE- Belt transmission/Pulley B.stl
    • UPGRADE- Belt transmission/Pulley C.stl
    • UPGRADE- Belt transmission/Shaft A.stl
    • UPGRADE- Belt transmission/Shaft B.stl
    • UPGRADE- Belt transmission/Shaft C.stl
    • UPGRADE- Belt transmission/Transmission A.stl
    • UPGRADE- Belt transmission/Transmission B.stl
    • UPGRADE- Belt transmission/Transmission C.stl
    • UPGRADE- Belt transmission/Transmission D.stl

Learn more about the formats
Last update 2024-02-05 at 20:08
Publication date 2023-09-16 at 15:20
Design number 1454339
Redneck_3D

Redneck_3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Fully 3D printable soviet BRDM-2 armored vehicle in scale 1/10.
With 4-Wheel drive (AWD).
Fully ambhipious.

Video:
https://youtu.be/MFKsF8Gmu6k
https://youtu.be/AOCNN4dxsCw
https://youtu.be/orolPjevtkg
Swimming:
https://youtu.be/tUvNrx6GL8g

Two optional modifications:
1. Reconnaissance version with 14,5mm KPVT heavy machine gun
2. 9P148 Konkurs ATGM launcher (Anti-Tank-Guided-Missile)

Link to assembly guide:
https://drive.google.com/drive/folders/1hTiCMBpkU9LwW3EsVwAm4ub-r-CzAKaK?usp=sharing

The BRDM-2 (Boyevaya Razvedyvatelnaya Dozornaya Mashina, Боевая Разведывательная Дозорная Машина, literally "Combat Reconnaissance/Patrol Vehicle") is an amphibious armoured scout car designed and developed in the Soviet Union. It was also known under the designations BTR-40PB, BTR-40P-2 and GAZ 41-08. This vehicle, like many other Soviet designs, has been exported extensively and is in use in at least 38 countries. It was intended to replace the older BRDM-1, and has improved amphibious capabilities and better armament compared to its predecessor.

Lenght: 575mm
Width: 234mm
Height:
Recon - 244mm
ATGM – 300 mm
Weight: approx 4 kg

Detailed, full of functions and easy to build (print).
All wheel drive.
Leaf spring suspension.
Servo driven turret traverse.
Retractable auxiliary wheels.
Working propeller and sealed hull means that vehicle is ambhipious.
Working Headlights, taillights and blinkers.
Printed tires.
Two optional transmission designs:
Geared transmission - slow, noisy, but high torque
New upgraded transmission - Higher top speed, enough torque and less noisy - recommended
Easy access to the transmission for maintenance.

The vehicle can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.

The model contains everything what you need to print and build the tank:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M3x8 – 8x
Screw M3x10 – 124x
Screw M3x15 – 4x
Screw M3x20 – 16x
Screw M3x40 – 4x
Screw M3x60 – 2x
Nut M3 – 20x
Socket set screw M3x6 – 1x
Motor 540 – 1x
Rubber band – 5x
Bearing 10x15x4 – 26x
Bearing 15x21x4 – 4x
Steel rod 2mm (e.g welding rod for autogenous welding) approx 60cm, alternatively you can use pieces of filament
Standard servo 360° (for turret traverse) - 1x
Standard servo 180° (for auxiliary wheels control) – 2x
Standard servo 180° (for steering) - 1x
Glue
Magnet 10x2mm – 8x (optional)

For belt transmission:

• Screw M3x6 – 2x
• Screw M3x10 – 18x
• Nut M3 – 2x
• Socket set screw M3x6 – 2x
• Motor 540 – 1x
• Bearing 10x15x4 – 8x
• Belt 60 XL 6,35mm – 3x
• Belt 70 XL 6,35mm – 1x
• Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.

3D printing settings

Recommended bed size: 220x200mm

Nozzle size: 0,4mm
Layer height: 0,2mm
Infill: 40%
Perimeters: 3
Material: PLA
Material for gears and shafts: PC/PET-G
Material for tires: TPU/TPE

Most parts do not require s. Parts that do need them have „“ in the name.

Categories

RC vehicles

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.