Skip to content

1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL

1.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_163016.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
2.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
3.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
4.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
5.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
6.png 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_162838.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_162918.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_162950.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_162956.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_163004.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_163025.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL
IMG_20240405_163031.jpg 1/10 ISU-152 HEAVY SELF PROPELLED GUN RC MODEL

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • ISU-152.zip
    • Accessories/Pickaxe - .stl
    • Accessories/Shovel - .stl
    • Accessories/Sledgehammer - .stl
    • Details/Engine hatch - .stl
    • Details/Engine hatch hinge A.stl
    • Details/Engine hatch hinge B.stl
    • Details/Fender flare L.stl
    • Details/Fender flare R.stl
    • Details/Fender front L.stl
    • Details/Fender front R.stl
    • Details/Fender holder L.stl
    • Details/Fender holder R.stl
    • Details/Fuel tank A - 4x.stl
    • Details/Fuel tank B - 4x.stl
    • Details/Fuel tank C - 4x.stl
    • Details/Fuel tank connector - 8x.stl
    • Details/Fuel tank empty holder A.stl
    • Details/Fuel tank empty holder B.stl
    • Details/Headlight 1.stl
    • Details/Headlight 2.stl
    • Details/Horn.stl
    • Details/Marker light - 4x.stl
    • Details/Mud scraper A - 2x.stl
    • Details/Mud scraper B - 2x.stl
    • Details/Rear fender L.stl
    • Details/Rear fender R.stl
    • Details/Towing hook - 4x.stl
    • Final drive/Final drive case - 2x.stl
    • Final drive/Final gear L.stl
    • Final drive/Final gear R.stl
    • Final drive/Main drive shaft.stl
    • Gun/Elevation arm.stl
    • Gun/Elevation gun mount.stl
    • Gun/Elevation servo arm - 180.stl
    • Gun/Elevation servo arm - 360.stl
    • Gun/Elevation servo mount.stl
    • Gun/Gun 1.stl
    • Gun/Gun 2.stl
    • Gun/Gun 3.stl
    • Gun/Gun connector.stl
    • Gun/Gun cradle - .stl
    • Gun/Gun mantlet - .stl
    • Gun/Gun mantlet t.stl
    • Gun/Gun shield A - .stl
    • Gun/Gun shield B - .stl
    • Gun/Mantlet top cover.stl
    • Gun/Muzzle brake - .stl
    • Gun/Recoil barrel arm.stl
    • Gun/Recoil servo arm.stl
    • Gun/Recoil servo mount.stl
    • Gun/Traverse arc A.stl
    • Gun/Traverse arc B.stl
    • Gun/Traverse arc C.stl
    • Gun/Traverse cam.stl
    • Gun/Traverse pivot bearing.stl
    • Gun/Traverse servo holder.stl
    • Gun/Trunnion bearing - 2x.stl
    • Hull reinforcements/Floor-floor - 2x.stl
    • Hull reinforcements/Rear side L.stl
    • Hull reinforcements/Rear side R.stl
    • Hull reinforcements/Side-side - 6x.stl
    • Hull reinforcements/Track tensioner case L.stl
    • Hull reinforcements/Track tensioner case R.stl
    • ISU-152 Assembly guide.pdf
    • ISU-152 CZ Nvod na stavbu.pdf
    • Lower hull/Floor 1.stl
    • Lower hull/Floor 2.stl
    • Lower hull/Floor 3.stl
    • Lower hull/Floor 4.stl
    • Lower hull/Front armor L+R.stl
    • Lower hull/Front armor L.stl
    • Lower hull/Front armor R.stl
    • Lower hull/Hull L1.stl
    • Lower hull/Hull L2.stl
    • Lower hull/Hull L3.stl
    • Lower hull/Hull L4.stl
    • Lower hull/Hull R1.stl
    • Lower hull/Hull R2.stl
    • Lower hull/Hull R3.stl
    • Lower hull/Hull R4.stl
    • Lower hull/Lower front armor.stl
    • Lower hull/Rear armor L+R.stl
    • Lower hull/Rear armor L.stl
    • Lower hull/Rear armor R.stl
    • Lower hull/Rear hatch A.stl
    • Lower hull/Rear hatch B.stl
    • Lower hull/Rear hatch C.stl
    • Lower hull/Rear hatch D.stl
    • Lower hull/Rear lower armor.stl
    • Lower hull/Return roller shaft - 6x.stl
    • Lower hull/Roof front.stl
    • Lower hull/Roof rear.stl
    • Lower hull/Side armor L.stl
    • Lower hull/Side armor R.stl
    • Lower hull/Side front armor L.stl
    • Lower hull/Side front armor R.stl
    • Lower hull/Superstructure reinforcement L.stl
    • Lower hull/Superstructure reinforcement R.stl
    • Lower hull/Top hatch 1 - 2x.stl
    • Lower hull/Top hatch 2 - 2x.stl
    • Superstructure/Front armor L+R.stl
    • Superstructure/Front armor L.stl
    • Superstructure/Front armor R.stl
    • Superstructure/Rear armor L+R.stl
    • Superstructure/Rear armor L.stl
    • Superstructure/Rear armor R.stl
    • Superstructure/Rear hatch A - .stl
    • Superstructure/Rear hatch B.stl
    • Superstructure/Rear hatch C - .stl
    • Superstructure/Rear hatch D.stl
    • Superstructure/Rear hatch latch.stl
    • Superstructure/Roof front L - .stl
    • Superstructure/Roof front L+R - .stl
    • Superstructure/Roof front R - .stl
    • Superstructure/Roof rear L+R.stl
    • Superstructure/Roof rear L.stl
    • Superstructure/Roof rear R.stl
    • Superstructure/Side armor L.stl
    • Superstructure/Side armor R.stl
    • Superstructure/Side front armor L.stl
    • Superstructure/Side front armor R.stl
    • Superstructure/Superstructure frame.stl
    • Superstructure/Superstructure reinforcement L.stl
    • Superstructure/Superstructure reinforcement R.stl
    • Superstructure/Top hatch 1 - 2x.stl
    • Superstructure/Top hatch 2 - 2x - .stl
    • Superstructure/Ventilation cover.stl
    • Suspension/Extension bearing - 12x.stl
    • Suspension/Shaft extension - 12x.stl
    • Suspension/Spring holder 12x.stl
    • Suspension/Suspension arm L - 5x.stl
    • Suspension/Suspension arm L1.stl
    • Suspension/Suspension arm R - 5x.stl
    • Suspension/Suspension arm R1.stl
    • Suspension/Suspension bearing L - 6x.stl
    • Suspension/Suspension bearing R - 6x.stl
    • Suspension/Wheel arm L - 6x.stl
    • Suspension/Wheel arm R - 6x.stl
    • Track link - 160x.stl
    • Track tensioner/Tensioner A1 - 2x.stl
    • Track tensioner/Tensioner A2 - 2x.stl
    • Track tensioner/Tensioner arm - 2x.stl
    • Track tensioner/Tensioner B1 - 2x.stl
    • Track tensioner/Tensioner B2 - 2x.stl
    • Track tensioner/Tensioner shaft - 2x.stl
    • Track tooth - 320x.stl
    • Transmissions/Final pulley L.stl
    • Transmissions/Final pulley R.stl
    • Transmissions/Motor pulley - 2x.stl
    • Transmissions/Pulley 1 - 2x.stl
    • Transmissions/Pulley 2 - 2x.stl
    • Transmissions/Pulley 3 - 2x.stl
    • Transmissions/Shaft 1 - 2x.stl
    • Transmissions/Shaft 2 - 2x.stl
    • Transmissions/Shaft 3 - 2x.stl
    • Transmissions/Shaft 4 - 2x.stl
    • Transmissions/Transmission L1.stl
    • Transmissions/Transmission L2 - .stl
    • Transmissions/Transmission L3.stl
    • Transmissions/Transmission R1.stl
    • Transmissions/Transmission R2 - .stl
    • Transmissions/Transmission R3.stl
    • Upper hull/Air inlet grille - 2x - only infill.stl
    • Upper hull/Air outlet grille L.stl
    • Upper hull/Air outlet grille R.stl
    • Upper hull/Fender L1.stl
    • Upper hull/Fender L2.stl
    • Upper hull/Fender L3.stl
    • Upper hull/Fender L4.stl
    • Upper hull/Fender R1.stl
    • Upper hull/Fender R2.stl
    • Upper hull/Fender R3.stl
    • Upper hull/Fender R4.stl
    • Upper hull/Rear roof armor L+R.stl
    • Upper hull/Rear roof armor L.stl
    • Upper hull/Rear roof armor R.stl
    • Upper hull/Rear roof frame.stl
    • Upper hull/Rear service hatch.stl
    • Upper hull/Rear upper armor frame.stl
    • Upper hull/Rear upper armor L+R.stl
    • Upper hull/Rear upper armor L.stl
    • Upper hull/Rear upper armor R.stl
    • Wheels/Bearing pad - 14x.stl
    • Wheels/Center cover - 14x - .stl
    • Wheels/Drive sprocket - 4x.stl
    • Wheels/Drive wheel A - 2x.stl
    • Wheels/Drive wheel B - 2x.stl
    • Wheels/Drive wheel center cover - 2x.stl
    • Wheels/Retur roller spacer - 6x.stl
    • Wheels/Return roller - 12x.stl
    • Wheels/Road wheel - 28x.stl
    • Wheels/Roller center cover - 6x - .stl
    • Wheels/Wheel spacer - 14x.stl

Learn more about the formats
Last update 2025-02-13 at 23:17
Publication date 2024-07-07 at 14:45
Design number 2116932
Redneck_3D

Redneck_3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Fully 3D printable soviet ISU-152 heavy self-propelled gun in scale 1/10.

Videos:
https://youtu.be/2_HmiIEeiCY?feature=shared
https://youtu.be/YizhkkJo57k?feature=shared

The ISU-152 (Russian: Самоходная установка на базе танка ИС с орудием калибра 152мм, ИСУ-152, Samokhodnaya Ustanovka na baze tanka IS s orudiyem kalibra 152mm, meaning "IS tank based self-propelled installation with 152mm caliber gun") is a Soviet heavy self-propelled gun developed and used during World War II. It was unofficially nicknamed "Zveroboy" (Russian: Зверобой; "beast killer") in response to several large German tanks and guns coming into service, including Tigers and Panthers. The massive superstructure contained devastating 152mm ML-20 gun-howitzer capable of destroying even the most armoured german tanks or fortifications per single shot. Therefore, it was used as mobile artillery to infantry and armor attacks. It continued service into the 1970s and was used in several campaigns and countries.

Link to assembly guide:
https://drive.google.com/drive/folders/1NM7DaSJIoPTo3Tku2LVknYRaOM2jt57F?usp=drive_linkhttps://drive.google.com/drive/folders/1hTiCMBpkU9LwW3EsVwAm4ub-r-CzAKaK?usp=sharing

Lenght: 937mm
Width: 345mm
Height: 250mm
Weight: approx 8 kg

Functional suspension.
Functional traverse.
Functional gun elevation.
Functional barrel recoil.
Adjustable track tension
Functional Headlight.
Printed tracks.
Printed transmissions.
Easy access to the transmissions for maintenance.

The vehicle can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.

The model contains everything what you need to print and build the vehicle:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M3x10 – 186x
• Screw M2x8 – 62x
• Screw M2x10 – 36x
• Nut M3 – 18x
• Screw M3x45 – 12x
• Screw M3x40 – 2x
• Screw M3x8 – 4x
• Socket set screw M3x4 – 4x
• Motor 540 – 2x
• Rubber band – 12x
• Bearing 10x15x4 – 30x
• Bearing 15x21x4 – 32x
• Steel rod 2mm (e.g. welding rod for autogenous welding) – 6m, alternatively you can use pieces of filament
• Standard servo 180° or 360° (for gun elevation) - 1x
• Standard servo 180° or 360° (for gun traverse) - 1x
• Standard servo 180° (for gun recoil) – 1x
• Belt 70XL 7,88mm – 6x
• Belt 60XL 9,4mm – 2x
• Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.

3D printing settings

Recommended bed size: 220x200mm

Nozzle size: 0,4mm
Layer height: 0,2mm
Infill: 40%
Perimeters: 3
Material: PLA
Material for gears and shafts: PC/PET-G

Most parts do not require s. Parts that do need them have „“ in the name.

Categories

RC vehicles

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.