Skip to content

1/10 RC german SdKfz 9 Famo heavy artillery tractor

IMG_20241218_105214.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
1.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
2.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
3.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_105026.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_104939.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
4.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
5.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_105242.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_105224.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_105117.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
IMG_20241218_105109.jpg 1/10 RC german SdKfz 9 Famo heavy artillery tractor
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (3 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • SdKfz 9 Famo.zip
    • Auxiliary frame/Auxiliary frame 1.stl
    • Auxiliary frame/Auxiliary frame 2.stl
    • Auxiliary frame/Auxiliary frame 3 - 2x.stl
    • Auxiliary frame/Auxiliary frame 4.stl
    • Bearing fitting tool - 2x.stl
    • Bed/Bed FL.stl
    • Bed/Bed FR.stl
    • Bed/Bed RL.stl
    • Bed/Bed RR.stl
    • Body/Bonnet rim L.stl
    • Body/Bonnet rim R.stl
    • Body/Bonnet side L.stl
    • Body/Bonnet side R.stl
    • Body/Bonnet top - brim.stl
    • Body/Cabin FL.stl
    • Body/Cabin FR.stl
    • Body/Cabin front .stl
    • Body/Cabin RL.stl
    • Body/Cabin RR.stl
    • Body/Engine compartment bulkhead.stl
    • Body/Fender L1.stl
    • Body/Fender L2.stl
    • Body/Fender L3.stl
    • Body/Fender L4.stl
    • Body/Fender R1.stl
    • Body/Fender R2.stl
    • Body/Fender R3.stl
    • Body/Fender R4.stl
    • Body/Fender reinforcement L.stl
    • Body/Fender reinforcement R.stl
    • Body/Fender side L.stl
    • Body/Fender side R.stl
    • Body/Front bench seat A.stl
    • Body/Front bench seat B.stl
    • Body/Front fender L.stl
    • Body/Front fender R.stl
    • Body/Front fender rim.stl
    • Body/Front floor.stl
    • Body/Front grille rim.stl
    • Body/Front grille.stl
    • Body/Rear bench seat A.stl
    • Body/Rear bench seat B.stl
    • Canvas roof/Canvas t 1 - 2x - .stl
    • Canvas roof/Canvas t 2 - 2x - .stl
    • Canvas roof/Canvas t 3 - 2x - .stl
    • Canvas roof/Canvas roof split L.stl
    • Canvas roof/Canvas roof split R.stl
    • Canvas roof/Canvas roof.stl
    • Details/Accelerator pedal.stl
    • Details/Aux light L.stl
    • Details/Aux light R.stl
    • Details/Aux light rim 1 - 2x.stl
    • Details/Aux light rim 2 - 2x.stl
    • Details/Brake pedal.stl
    • Details/Clutch pedal.stl
    • Details/Dashboard .stl
    • Details/Dashboard.stl
    • Details/Feeler L.stl
    • Details/Feeler R.stl
    • Details/Fender - 4x.stl
    • Details/Front hitch.stl
    • Details/Front number plate - blank.stl
    • Details/Front number plate.stl
    • Details/Gear shifter.stl
    • Details/Gun rack.stl
    • Details/Handbrake.stl
    • Details/Headlight - 2x - .stl
    • Details/Headlight rim - 2x.stl
    • Details/Number plate - blank.stl
    • Details/Number plate light.stl
    • Details/Number plate.stl
    • Details/Reduction gear shifter.stl
    • Details/Searchlight arm.stl
    • Details/Searchlight rim.stl
    • Details/Searchlight.stl
    • Details/Shovel - .stl
    • Details/Steering wheel shaft.stl
    • Details/Steering wheel.stl
    • Details/Tail light rim.stl
    • Details/Tail light.stl
    • Details/Tailgate - brim.stl
    • Details/Tailgate latch - 2x.stl
    • Details/Tank.stl
    • Details/Windshield 1.stl
    • Details/Windshield 2.stl
    • Details/Wiper.stl
    • Frame/Frame front.stl
    • Frame/Frame t - 4x.stl
    • Frame/Frame L1.stl
    • Frame/Frame L2.stl
    • Frame/Frame L3.stl
    • Frame/Frame R1.stl
    • Frame/Frame R2.stl
    • Frame/Frame R3.stl
    • Frame/Main pulley shaft.stl
    • Frame/Rear crossbar - .stl
    • Frame/Rear lower reinforcement.stl
    • Frame/Rear suspension crossbar.stl
    • Frame/Rear upper reinforcement L.stl
    • Frame/Rear upper reinforcement R.stl
    • Frame/Suspension crossbar 1 - 3x.stl
    • Frame/Suspension crossbar 2.stl
    • Frame/Suspension crossbar 3.stl
    • Frame/Trailer hitch 1 - brim.stl
    • Frame/Trailer hitch 2.stl
    • Frame/Trailer hitch 3 - brim.stl
    • Frame/Trailer hitch pin - 2X.stl
    • Frame/Winch drum 1.stl
    • Frame/Winch drum 2.stl
    • Frame/Winch hook.stl
    • Frame/Winch main pulley.stl
    • Frame/Winch pulley 1.stl
    • Frame/Winch pulley 2 - 2x.stl
    • Frame/Winch pulley arm - 2x.stl
    • Front axle/Axle body.stl
    • Front axle/Bearing cover - 2x.stl
    • Front axle/Hubcap - 2x - .stl
    • Front axle/Knuckle L - .stl
    • Front axle/Knuckle R - .stl
    • Front axle/Leaf spring bracket - 2x.stl
    • Front axle/Leaf springs.stl
    • Front axle/Pitman arm.stl
    • Front axle/Shaft end washer - 2x.stl
    • Front axle/Steering servo holder.stl
    • Front axle/Track rod.stl
    • Front axle/Watts link - 2x.stl
    • Front axle/Watts link pivot.stl
    • Front axle/Wheel hub - 2x.stl
    • Front axle/Wish bone 1.stl
    • Front axle/Wish bone 2.stl
    • Front axle/Wish bone 3.stl
    • Front axle/Wish bone housing.stl
    • SdKfz 9 Famo CZ.pdf
    • SdKfz 9 Famo EN.pdf
    • Suspension/Suspension arm A - 6x.stl
    • Suspension/Suspension arm B - 6x.stl
    • Suspension/Suspension arm t - 12x.stl
    • Suspension/Suspension arm L - 6x.stl
    • Suspension/Suspension arm R - 6x.stl
    • Suspension/Suspension limiter 1 - 12x.stl
    • Suspension/Suspension limiter 2 - 12x.stl
    • Suspension/Tensioner arm - 2x.stl
    • Suspension/Tensioner shaft - 2x.stl
    • Tracks/Ruber pad - 96x - FLEX.stl
    • Tracks/Track 1 - 96x.stl
    • Tracks/Track 2 - 96x.stl
    • Tracks/Track tooth - 96x.stl
    • Transmission/Final gear - 2x.stl
    • Transmission/Final gear cover - 2x.stl
    • Transmission/Final shaft - 2x.stl
    • Transmission/Gear 1 - 2x.stl
    • Transmission/Gear 2 - 2x.stl
    • Transmission/Gear 3 - 2x.stl
    • Transmission/Gear 4 - 2x - brim.stl
    • Transmission/Motor gear - 2x.stl
    • Transmission/Shaft 2 - 2x.stl
    • Transmission/Shaft 3 - 2x.stl
    • Transmission/Transmission 1 - 2x.stl
    • Transmission/Transmission 2 - 2x.stl
    • Wheel assembly tool 1 - 2x.stl
    • Wheel assembly tool 2 - 2x.stl
    • Wheels/Hubcap - 14x - .stl
    • Wheels/Rim 1 - 2x.stl
    • Wheels/Rim 2 - 2x.stl
    • Wheels/Shaft - 14x.stl
    • Wheels/Sprocket t - 2x.stl
    • Wheels/Tyre - 2x.stl
    • Wheels/Wheel spacer - 2 - 6x.stl
    • Wheels/Wheel spacer 1 - 8x.stl
    • Wheels/Wheels with flex bandage/Sprocket bandage - 4x - FLEX.stl
    • Wheels/Wheels with flex bandage/Sprocket L1.stl
    • Wheels/Wheels with flex bandage/Sprocket L2.stl
    • Wheels/Wheels with flex bandage/Sprocket R1.stl
    • Wheels/Wheels with flex bandage/Sprocket R2.stl
    • Wheels/Wheels with flex bandage/Wheel 1 - 16x.stl
    • Wheels/Wheels with flex bandage/Wheel 2 - 12x.stl
    • Wheels/Wheels with flex bandage/Wheel bandage - 28x - FLEX.stl
    • Wheels/Wheels with non-flex bandage/Sprocket bandage - 4x.stl
    • Wheels/Wheels with non-flex bandage/Sprocket L1.stl
    • Wheels/Wheels with non-flex bandage/Sprocket L2.stl
    • Wheels/Wheels with non-flex bandage/Sprocket R1.stl
    • Wheels/Wheels with non-flex bandage/Sprocket R2.stl
    • Wheels/Wheels with non-flex bandage/Wheel 1 - 16x.stl
    • Wheels/Wheels with non-flex bandage/Wheel 2 - 12x.stl
    • Wheels/Wheels with non-flex bandage/Wheel bandage - 28x.stl

Learn more about the formats
Last update 2025-02-15 at 11:39
Publication date 2024-12-21 at 14:36
Design number 2577377
Redneck_3D

Redneck_3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Fully 3D printable german SdKfz 9 Famo artillery tractor in scale 1/10.

Video:
https://youtu.be/OA93KXQjyFM

Link to assembly guide:
https://drive.google.com/drive/folders/1XZuMeEr2uzMu6TnBydOr3mzOAl-jLuu2?usp=drive_link

The Sd.Kfz. 9 (also known as "Famo") was a German half-track that saw widespread use in World War II, and the heaviest half-track vehicle of any type built in quantity in Nazi during the war years. Its main roles were as a prime mover for very heavy towed guns such as the 24 cm Kanone 3 and as a tank recovery vehicle. Approximately 2,500 were produced between 1938 and 1945.
Both tracks and wheels were used for steering. The steering system was set up so that shallow turns used only the wheels, but brakes would be applied to the tracks the further the steering wheel was turned.
The Sd.Kfz. 9 was designed to have a towing capacity of 28 tonnes.
All were equipped with a winch, mounted in the middle of the vehicle, just under the cargo platform.

Lenght: 871mm
Width: 285mm
Height: 290mm
Weight: approx 8kg

Detailed, full of functions and easy to build (print).
Track drive.
Front axle and track steering.
Functional suspension.
Servo driven winch.
Functional headlights, taillights and blinkers.
Printed tires.
Easy access to the transmission for maintenance.

The vehicle can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.

The model contains everything what you need to print and build the vehicle
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M2x6 – 64x
Screw M2x8 – 12x
Screw M3x6 – 4x
Screw M3x10 – 191x
Screw M3x15 – 22x
Screw M3x20 – 2x
Screw M3x30 – 12x
Nut M2 – 12x
Socket set screw M3x4 – 2x
Motor 540 (35T or higher) – 2x
Rubber band – 13x
Bearing 10x15x4 – 46x
Bearing 15x21x4 – 6x
Steel rod 2mm (e.g. welding rod for autogenous welding) – 5m
alternatively you can use pieces of filament
Steel wire 0,5mm (for a the hinged window – optional, otherwise use glue) - 1cm
Rope (for winch) – lenght depends on rope diameter
(it must fit into the winch drum)
Standard servo 180Β° (for the front axle steering) - 1x
Standard servo 360Β° (for the winch) - 1x
Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.

3D printing settings

Min. bed size: 220x200mm
Nozzle size: 0,4mm
Layer height: 0,2mm
Infill: 40%
Perimeters:
Gears and shafts – 6 Everything else – 3
Material: PLA/PETG
Material for gears and shafts: PC/PET-G
Material for tires: TPU/TPE
Print settings for tires: Perimeters: 2
Top layers: 5
Bottom layers: 5
Infill pattern: Gyroid
Infill density: 5%
s: On

Most parts do not require s. Parts that do need them have β€žβ€œ in the name.

Categories

Auto & moto

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.