Лягушка Blob - магнитная игрушка Flexi Fidget Art

BLOB FROG

This cute rainforest creature loves to cling high up with its magnetic feet. The Blob Frog has an articulating head and flexible legs perfect for hopping or posing. You can print in parts and add a color change on the belly for single color printers, or you can go all out by printing in multicolor. There are three different patterned frogs: a red eyed tree frog, striped poison dart frog, and spotted poison dart frog.

• flexi legs
• articulating head
• magnetic feet and hidden/no magnet version
• print-in-parts and multicolor files included

PERSONAL USE ONLY

Purchasing or ing this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to patreon.com/bloblab

COPYRIGHT PROTECTED FILES

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

• .2mm standard layer height, .12mm for high quality
• no s
• brim recommended
• eyes snap into head, use superglue if too loose, scale parts 00.5% if too tight
• glue on jaw if printed in parts
• 3x8mm round magnets fit 100% scale, press or glue in depending on your tolerances. For the hidden magnet version, right click on your slicer timeline and "add stop" at the 3.8mm mark to place your magnets. Alternate the magnet polarity so that the frog can put its feet together for added fun.
• 3MF files are for color information only, settings may need to be adjusted. Colored frog STLs are split so you can easily use the paint bucket tool for custom color schemes.