creating 3D printable designer toys, commercial license available via patreon.com/bloblab
👋 Всем привет! Эта тема является публичной, поэтому давайте будем вести себя вежливо и уважительно. Никакой рекламы, спама или гадостей!
🇺🇸 Страна пользователя: Соединённые штаты
🌐 Предпочитаемый язык пользователя: Английский. Вы можете переводить онлайн через DeepL.
💡 Вы имеете в виду конкретную модель? Добавьте ссылку, название или номер модели.
🖼️ Хотите разместить фотографии? Используйте бесплатный хостинг типа ImgBB и вставляйте ссылки в сообщение.
✍️ Советы по написанию**: Используйте формат Markdown, чтобы структурировать текст и сделать его более читаемым.
hello, I see a new plant design of yours on Facebook, sunflowers in a watering can for example. If I sign up for Patreon, can I also this or is this a file from last month and do I still have to buy it separately? I would like to hear from you, greetings Yasmin
all files are currently available to on Patreon
do you make these prints yourself?
yes all these designs are original
Hi, I printed the Pigeon and it turned out great! I am having trouble getting the feet to go into the body though. I don't want to push too hard and break it. Any suggestions?
“Is the magnet 8mm in diameter and 3mm thick, or 3mm in diameter and 8mm thick?”
8mm diameter, 3mm thick
Do you have the file available for the display stand?
it is available on patreon.com/bloblab since it is used for selling
I really like your work. May I purchase it for printing and resale? How can I obtain your authorization or licensing proof?
yes subscribe to patreon.com/bloblab
Hallo ich habe ihre Datei gekauft und finde sie super . Die Frage ist kann ich dafür auch die Lizenz bekommen
yes subscribe to patreon.com/bloblab
Hi, I really ire your art. May I have your permission to print and sell your artwork?"
if you subscribe to patreon.com/bloblab you have the rights
Hi, love the designs. I bought the ice cream file but just wondering if you have the file for Bambu? I think it's 3mf? Sorry new to this.
Thank you
yes 3mf should be included in the files
Hi,
The body printed beautifully, but both times, the head starts well, then ends as a tangle of filament. Any suggestions?
Hi, I bought the magnetic frog but can't get it to with the colours. Could you advise what I might be missing? Thanks
Did you happen to create a 3MF file of the version of the Gecko body with hidden magnets that is colored like the regular Gecko body. I've been trying to match that but just can't get it to look like yours.
I have not done a version like that, but I plan to update it in the future. You can use the paint bucket tool to color yourself if you want
I tried that but it’s not as clean and uniform as your version. The toes have segregated color areas but the rest of the design does not.
Hello, I printed blob rock at x300 in Orca, however I'm having difficulty printing the eyes and highlights to match. Any suggestions on how to get them to print correctly to match up?
I haven't tried printing that large but you can adjust the scale or x-y compensation if parts are too tight
I tried to print the eyes at 300 but they were too small to fit.
Could you make a bigger one?
you can scale parts to make them bigger
Have you giving any thought of doing a Red Panda.
Good evening, love the builds!! Trying to print the Geo dude and it keeps failing around 75%, like I come to a mess of filament. I So far the sitting and regular rock have printed just fine. Any suggestions?
try adding s and brim
I’m new to printing, but for the seaweed bed do you print it like it is imported? Enable s? Thank you
no s needed, print on the flat side
any tips on how to get the leaves in to the plant? I am scared that they are going to break.
thanks again
if they are too tight, try scaling or adjusting the x-y compensation, make sure you have flow calibration on
I purchased your pet rock set and printing the body and parts separate, however the model pieces are not fitting together right. Printing at the recommended 0.12 layer but having to make several model tweaks to get them close to fitting. As this is a purchased product I would think they should be good to go. The eyes and highlights were downsized to work at different percentages. I still cannot get the crystals to work right without cutting away at the model to fit the space. Can you provide any insight into this?
responded to your comment on the rocks page
Hi
I couldn't see the pink nose and inner ears as separate parts for the head section of the product. Could you share them separately as well?
Current part list:
Head
Left eye
Left pupil
Right eye
Right pupil
Body
Carrot
Requested part list:
Head (avaible)
Left eye (avaible)
Left pupil (avaible)
Right eye (avaible)
Right pupil (avaible)
Nose *(need)
Left inner ear *(need)
Right inner ear *(need)
Body (avaible)
Carrot (avaible)
Thanks for the Axolotl7 model. Sadly there is an issue with the provided files. In the .3mf project, the head (without eyes) has another color embedded which is unnecessary. I was not able to paint the gills like you did in the project file so I am stuck with the additional color (white in the screenshot):
I wasn't able to replicate the image you posted. I would try reing the file and testing again. You can always use the paint bucket tool to color the parts yourself.
Hi. I love your designs. I am very new to 3d printing and I have only used makerworld so far. Those designs right into my Bambu handy and I just print. Will your design be ready to print?
You will need a computer for my files, simply drag and drop them into your slicer. You may need to adjust settings depending on your printer
Hello, I found your model for sale on Etsy without permission...
https://www.etsy.com/listing/1863319282/gun-jie-shi-cats-pakku-3d-yin-shu-yong
The image shows your cat model. This seller is selling many other models in addition to yours without permission, which is an extremely malicious act. We recommend that you take action as soon as possible.
Thank you for letting me know, I will look into it
Hi there.
New to 3D printing.
Have a FLSUN Super Racer.
Is the axolotl going to be doable for me? I’d like to find out if it’s super hard to make before I purchase it?
And does the seaweed gage come with?
Thanks! Love your creations!
Thanks! my designs should work on all FDM printers, yes the seaweed bed comes with it
hello i just purchased the multi colored easter eggs but they are not multicolored, did i miss something?
use the .3MF file or you can also use the paint bucket tool to make your own
so i just confirmed the file i ed says multicolor but they are all STL files
apologies! I'm not sure why the 3MF file wasn't included, I just updated it. Of course the STL files are still split so you can use the paint bucket to customize
how do i get them?
i ed again and still same files
maybe i have to repurchase it
never mind i found it
Thank u!!
I love the pet rocks!!! I just wish the box had a version that had the words cut out so the text could be printed by itself in a different colour for those of us without multimaterial.
you can always make your own custom label in the slicer with the text tool and glue it on