Aller au contenu

Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-2.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-3.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-4.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-5.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-6.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-7.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-8.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-9.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-site-prew-10.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-Tool-changer-update.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-4in1-bucket-prev.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-forks-update.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-cab-door-update.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
Lift-arm-Linear-actuator-modification-with-N30-motor.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
SSL-grapple-bucket-update.png Imprimé en 3D RC Skid Steer Loader sur chenilles à l'échelle 1/8.5 par AN3DRC
Publicité
Partager
Ajouter à
Make
Publicité
?
Qualité de la création : 5/5 (2 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.
Licence
Usages
Format du design 3D
1 fichier (ZIP) Fermer
  • [AN3DRC] Tracked Skid Steer Loader.zip
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 (no s).stl
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 locker link.stl
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 locker.stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 (no s).stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 left (no s, for 180x180mm printers).stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 right (no s, for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket bracket inner L (print 1pcs + 1 mirrored copy).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket bracket outer L (print 1pcs + 1 mirrored copy).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket front part L (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket front part.stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket protective grille.stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part L (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part R (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part.stl
    • (update 13dec23) 4in1 Bucket/SSL Linear actuator axis shift bracket v1 (print 2pcs).stl
    • (Update 20sep24) Lift arm Linear actuators modification with N30 motor/N30 actuators casing by RGMOD (print with 0.1mm layer height).stl
    • (Update 20sep24) Lift arm Linear actuators modification with N30 motor/SSL Lift arm RL For Actuators with N30 motor.stl
    • (update 21apr24) Cab door/SSL Cab door bracket.stl
    • (update 21apr24) Cab door/SSL Cab door frame.stl
    • (update 21apr24) Cab door/SSL Cab door glass.stl
    • (update 21apr24) Cab door/SSL Wiper ball pin.stl
    • (update 21apr24) Cab door/SSL Wiper base.stl
    • (update 21apr24) Cab door/SSL Wiper.stl
    • (update 21apr24) Forks/Pallet (1 to 8.5 scale).stl
    • (update 21apr24) Forks/SSL Forks frame (no s).stl
    • (update 21apr24) Forks/SSL Forks guard.stl
    • (update 21apr24) Forks/SSL Forks tooth long 143mm.stl
    • (update 21apr24) Forks/SSL Forks tooth short 98mm.stl
    • (update 23feb25) Grapple bucket/SSL Grapple bucket Claws.stl
    • (update 23feb25) Grapple bucket/SSL Grapple bucket main part.stl
    • (update 23feb25) Grapple bucket/SSL Linear actuator axis shift bracket v1 (print 2pcs).stl
    • Alternative parts/for 180x180mm printers/SSL Bucket half left(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Cab front part(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Cab main part(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Lift arm RL1(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Lift arm RL2(for 180x180mm printers).stl
    • Alternative parts/for 300x300mm printers/SSL Body(3in1 for 300x300mm printers).stl
    • Alternative parts/for 300x300mm printers/SSL Chassis(2in1 for 300x300mm printers).stl
    • Alternative parts/Link to N30 motor casing files.txt
    • Alternative parts/SSL Bucket plate for modifiing from v1 to v2.stl
    • Alternative parts/SSL Lift arm RL For Actuators with N30 motor.stl
    • Alternative parts/SSL Track v2a ((52 tooths).stl
    • Alternative parts/SSL Track v2b (40 tooths).stl
    • Alternative parts/Tailgate with detached lights/SSL Tailgate light.stl
    • Alternative parts/Tailgate with detached lights/SSL Tailgate(with detached lights).stl
    • AN3DRC_Skid_steer_light_module/AN3DRC_Skid_steer_light_module.ino
    • Helpers/bend-help-arm.stl
    • Helpers/bend-help-cabin.stl
    • Helpers/drill-holder.stl
    • Helpers/SSL Cab LEDs soldering helper.stl
    • Helpers/Switch holder.stl
    • Light lamp glasses(for resin printers)/SSL Cab light glass L.stl
    • Light lamp glasses(for resin printers)/SSL Tailgate red lamp glass.stl
    • Light lamp glasses(for resin printers)/SSL Tailgate white lamp glass.stl
    • Printing groups/1) SSL Chassis F, chassis side caps(no s).stl
    • Printing groups/10) SSL Body F(no s).stl
    • Printing groups/11) SSL Body rear main parts(no s).stl
    • Printing groups/12) SSL Body frames.stl
    • Printing groups/13) SSL Body top cap, corner parts, side grills.stl
    • Printing groups/14) SSL Tailgate with C-hook.stl
    • Printing groups/15) SSL Cab(no s).stl
    • Printing groups/16) SSL Seat(no s).stl
    • Printing groups/17) SSL Cab grills, C-hooks.stl
    • Printing groups/18) SSL Lift arm parts 1.stl
    • Printing groups/19) SSL Lift arm parts 2.stl
    • Printing groups/2) SSL Chassis R.stl
    • Printing groups/20) SSL Lift arm links.stl
    • Printing groups/21) SSL Bucket parts(no s).stl
    • Printing groups/3) SSL Chassis Bearing holders, tensioner wheels, pulley spacers.stl
    • Printing groups/4) SSL Pulleys.stl
    • Printing groups/5) SSL Tracks bodys.stl
    • Printing groups/6) SSL Tracks wheels.stl
    • Printing groups/7-8) SSL Track(print with FLEX filament).stl
    • Printing groups/9) SSL Motor space cap(no s).stl
    • Single parts/Body/SSL Body corner part RR + RL.stl
    • Single parts/Body/SSL Body F(no s).stl
    • Single parts/Body/SSL Body frame rear.stl
    • Single parts/Body/SSL Body frame top.stl
    • Single parts/Body/SSL Body RL(no s).stl
    • Single parts/Body/SSL Body RR(no s).stl
    • Single parts/Body/SSL Body side grill R + L.stl
    • Single parts/Body/SSL Body top cap(no s).stl
    • Single parts/Body/SSL Tailgate C-hook.stl
    • Single parts/Body/SSL Tailgate.stl
    • Single parts/Cab/SSL Cab Back window glass frame.stl
    • Single parts/Cab/SSL Cab C-hooks.stl
    • Single parts/Cab/SSL Cab(no s).stl
    • Single parts/Cab/SSL Seat(no s).stl
    • Single parts/Cab/SSL Top window grill.stl
    • Single parts/Cab/SSL Window grill L.stl
    • Single parts/Chassis/Pulley 100T(bore 5mm, width 10mm).stl
    • Single parts/Chassis/Pulley 100T(bore 8mm, width 10mm).stl
    • Single parts/Chassis/SSL Bearing holder 1.stl
    • Single parts/Chassis/SSL Bearing holder 2.stl
    • Single parts/Chassis/SSL Bearing holder 3.stl
    • Single parts/Chassis/SSL Bearing holder 4.stl
    • Single parts/Chassis/SSL Chassis F.stl
    • Single parts/Chassis/SSL Chassis R.stl
    • Single parts/Chassis/SSL Chassis side cap R + L.stl
    • Single parts/Chassis/SSL Motor space cap(no s).stl
    • Single parts/Chassis/SSL Pulley spacer.stl
    • Single parts/Chassis/SSL Tensioner wheel.stl
    • Single parts/Chassis/SSL Track body L.stl
    • Single parts/Chassis/SSL Track(print with FLEX filament).stl
    • Single parts/Chassis/SSL Tracks drive sprocket cap.stl
    • Single parts/Chassis/SSL Tracks drive sprocket hub.stl
    • Single parts/Chassis/SSL Tracks drive sprocket.stl
    • Single parts/Chassis/SSL Tracks Idler wheel.stl
    • Single parts/Chassis/SSL Tracks Indler wheel tube.stl
    • Single parts/Chassis/SSL Tracks Road wheel big.stl
    • Single parts/Chassis/SSL Tracks Road wheel small.stl
    • Single parts/Lift arm/SSL Bucket mount plate(no s).stl
    • Single parts/Lift arm/SSL Bucket(no s).stl
    • Single parts/Lift arm/SSL Lift arm F.stl
    • Single parts/Lift arm/SSL Lift arm link.stl
    • Single parts/Lift arm/SSL Lift arm pipes connectors.stl
    • Single parts/Lift arm/SSL Lift arm rear frame.stl
    • Single parts/Lift arm/SSL Lift arm RL.stl

En savoir plus sur les formats
Dernière mise à jour 2025-04-13 à 10h25
Date de publication 2024-05-08 à 10h51
Numéro du design 1977934
AN3DRC_Construction

AN3DRC_Construction

Compte certifié
  • er
Vous rencontrez un souci avec ce design ? Signaler un problème.

6 commentaires

Ajouter un commentaire

6 commentaires

Drewski_09
Drewski_09

Hello, do you know what the difference in power and speed are for the updated actuators is? The 15mm/s, 64N (vs) NEW N30 motor __mm/s, __N? THANKS!

AN3DRC_Construction
AN3DRC_Construction

Hello! You need to choose N30 motor with 200rpm. Before conversion my Loader had possibility to lift 2.2kg, after conversion - 3.6kg. You can see a video how I made my conversion https://www.facebook.com/share/v/12GhygqYfBR/

Drewski_09
Drewski_09

Thank you, is it possible to add counterweights in the back somewhere so that it won't tip forward while lifting that large of a load or would that damage the drive motors?

AN3DRC_Construction
AN3DRC_Construction

Hmmm its hard question.
My model assembled with original belt drive gearbox and when bucket is empty I have fillings that model have to much weight on the back. And as you saw on video, when I am tried to lift 3.6kg, model began tipped forward.
I guess that better plan will be to assemble model and that make some experiment with adding some weight inside. Its big model and have a lot of space inside where you can add some weights.
shaballa
shaballa

Hello, any chance you could make a Backhoe/ or trencher attachment?

AN3DRC_Construction
AN3DRC_Construction

Hello! Currently I am busy with another tasks. I am planning to design something like JCB 1CXT tracked backhoe-loader, therefore you will have possibility to get digging experience. But this project not be available soon. Maybe in the middle of autumn.

kakaowy_zlodziejaszek
kakaowy_zlodziejaszek

can you post a sneak peak cause i am wondering schould i buy the skidsteer

AN3DRC_Construction
AN3DRC_Construction

Read model description! In the description you can find links to short overview video, Links to assembly instruction and also links to video of full build process for this great model. I am sure it will give you enough information)

kakaowy_zlodziejaszek
kakaowy_zlodziejaszek

sorry i meant about the backhoe. schould i wait for it to get relased

AN3DRC_Construction
AN3DRC_Construction

Just search JCB 1CXT on YouTube or Google Search)

kakaowy_zlodziejaszek
kakaowy_zlodziejaszek

okay thanks I will wait looks realy cool
travis-xyqa
travis-xyqa

I bought the version that is no longer available to find on here. Do I have access to this updated one? Also, do you have a list of parts to buy that weren't printed?

AN3DRC_Construction
AN3DRC_Construction

Files still available for in your orders menu https://cults3d.sitegames.net/en/orders
Archive in your orders menu was updated to actual version.
List of non printed parts you can find inside assembly instruction. Link to assembly instruction you can find in the description on this page under photos of model.

travis-xyqa
travis-xyqa

I'm fairly new with Cults, where is the archive at? I can find the order

AN3DRC_Construction
AN3DRC_Construction

It must be somewhere in this menu https://cults3d.sitegames.net/en/orders search with more attention.
samuel-choiniere
samuel-choiniere

Hi, is an STL file included for the stickers, so we can also add them to our models?

AN3DRC_Construction
AN3DRC_Construction

Hello! Decorative elements made by community member. You can find files here https://cults3d.sitegames.net/en/3d-model/game/bobcat-logo-for-an3drc-skid-steer-loader
juniorlovemoto
juniorlovemoto

hi man I bought your plan but I would like to have tracks with a higher 8mm stud thanks I can pay if you like

AN3DRC_Construction
AN3DRC_Construction

Hi! Do you want me to make a new track design or just increase the stud size?

juniorlovemoto
juniorlovemoto

yes it might be good to change the design of the crampons so that they are higher thanks again

juniorlovemoto
juniorlovemoto

maybe keep the same angle in the sides but just one stud wide no separation in the center

AN3DRC_Construction
AN3DRC_Construction

I am not very good understand what you mean. Do you have real life examples?

juniorlovemoto
juniorlovemoto

I just want to get bigger crampons around 7mm. THANKS. I'll let you imagine it all :)

AN3DRC_Construction
AN3DRC_Construction

In my imagination if I just extend stud, it will look ugly. I think, I need to design something like this https://cdn11.bigcommerce.com/s-sbriyjya1m/images/stencil/1280x1280/products/4919/11098/ext-tread__03478.1613718492.jpg?c=2

juniorlovemoto
juniorlovemoto

yes it could be a good idea can you make the 2 models with the crampons higher and I will choose thank you. I speak French dsl of translation

AN3DRC_Construction
AN3DRC_Construction

Ok, I will do it this week.

  • 1 j’aime
juniorlovemoto
juniorlovemoto

thank you, the tracks are really perfect. nice look

AN3DRC_Construction
AN3DRC_Construction

You welcome! Please, report how it work when you print it)

juniorlovemoto
juniorlovemoto

Hi, is it possible to make an improvement on the new tracks? increase the distance between the studs spacing of 10mm to reduce the rigidity and flexion of the tracks and increase traction thank you. we are close to perfection :)

AN3DRC_Construction
AN3DRC_Construction

Hi! Yes, no problem. Just ed.

  • 1 j’aime

Page traduite par traduction automatique. Voir la version originale.

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 4 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 3 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité.
  • DON : Faire un don via Ko-Fi 💜.
  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !

Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.