Skip to content

3D Printed RC Tracked Skid Steer Loader in 1/8.5 scale by AN3DRC

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • [AN3DRC] Tracked Skid Steer Loader.zip
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 (no s).stl
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 locker link.stl
    • (update 09sep23) Quick tool changer/SSL Bucket mount plate v2 locker.stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 (no s).stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 left (no s, for 180x180mm printers).stl
    • (update 09sep23) Quick tool changer/SSL Bucket v2 right (no s, for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket bracket inner L (print 1pcs + 1 mirrored copy).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket bracket outer L (print 1pcs + 1 mirrored copy).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket front part L (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket front part.stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket protective grille.stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part L (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part R (for 180x180mm printers).stl
    • (update 13dec23) 4in1 Bucket/SSL 4in1 Bucket rear part.stl
    • (update 13dec23) 4in1 Bucket/SSL Linear actuator axis shift bracket v1 (print 2pcs).stl
    • (Update 20sep24) Lift arm Linear actuators modification with N30 motor/N30 actuators casing by RGMOD (print with 0.1mm layer height).stl
    • (Update 20sep24) Lift arm Linear actuators modification with N30 motor/SSL Lift arm RL For Actuators with N30 motor.stl
    • (update 21apr24) Cab door/SSL Cab door bracket.stl
    • (update 21apr24) Cab door/SSL Cab door frame.stl
    • (update 21apr24) Cab door/SSL Cab door glass.stl
    • (update 21apr24) Cab door/SSL Wiper ball pin.stl
    • (update 21apr24) Cab door/SSL Wiper base.stl
    • (update 21apr24) Cab door/SSL Wiper.stl
    • (update 21apr24) Forks/Pallet (1 to 8.5 scale).stl
    • (update 21apr24) Forks/SSL Forks frame (no s).stl
    • (update 21apr24) Forks/SSL Forks guard.stl
    • (update 21apr24) Forks/SSL Forks tooth long 143mm.stl
    • (update 21apr24) Forks/SSL Forks tooth short 98mm.stl
    • (update 23feb25) Grapple bucket/SSL Grapple bucket Claws.stl
    • (update 23feb25) Grapple bucket/SSL Grapple bucket main part.stl
    • (update 23feb25) Grapple bucket/SSL Linear actuator axis shift bracket v1 (print 2pcs).stl
    • Alternative parts/for 180x180mm printers/SSL Bucket half left(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Cab front part(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Cab main part(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Lift arm RL1(for 180x180mm printers).stl
    • Alternative parts/for 180x180mm printers/SSL Lift arm RL2(for 180x180mm printers).stl
    • Alternative parts/for 300x300mm printers/SSL Body(3in1 for 300x300mm printers).stl
    • Alternative parts/for 300x300mm printers/SSL Chassis(2in1 for 300x300mm printers).stl
    • Alternative parts/Link to N30 motor casing files.txt
    • Alternative parts/SSL Bucket plate for modifiing from v1 to v2.stl
    • Alternative parts/SSL Lift arm RL For Actuators with N30 motor.stl
    • Alternative parts/SSL Track v2a ((52 tooths).stl
    • Alternative parts/SSL Track v2b (40 tooths).stl
    • Alternative parts/Tailgate with detached lights/SSL Tailgate light.stl
    • Alternative parts/Tailgate with detached lights/SSL Tailgate(with detached lights).stl
    • AN3DRC_Skid_steer_light_module/AN3DRC_Skid_steer_light_module.ino
    • Helpers/bend-help-arm.stl
    • Helpers/bend-help-cabin.stl
    • Helpers/drill-holder.stl
    • Helpers/SSL Cab LEDs soldering helper.stl
    • Helpers/Switch holder.stl
    • Light lamp glasses(for resin printers)/SSL Cab light glass L.stl
    • Light lamp glasses(for resin printers)/SSL Tailgate red lamp glass.stl
    • Light lamp glasses(for resin printers)/SSL Tailgate white lamp glass.stl
    • Printing groups/1) SSL Chassis F, chassis side caps(no s).stl
    • Printing groups/10) SSL Body F(no s).stl
    • Printing groups/11) SSL Body rear main parts(no s).stl
    • Printing groups/12) SSL Body frames.stl
    • Printing groups/13) SSL Body top cap, corner parts, side grills.stl
    • Printing groups/14) SSL Tailgate with C-hook.stl
    • Printing groups/15) SSL Cab(no s).stl
    • Printing groups/16) SSL Seat(no s).stl
    • Printing groups/17) SSL Cab grills, C-hooks.stl
    • Printing groups/18) SSL Lift arm parts 1.stl
    • Printing groups/19) SSL Lift arm parts 2.stl
    • Printing groups/2) SSL Chassis R.stl
    • Printing groups/20) SSL Lift arm links.stl
    • Printing groups/21) SSL Bucket parts(no s).stl
    • Printing groups/3) SSL Chassis Bearing holders, tensioner wheels, pulley spacers.stl
    • Printing groups/4) SSL Pulleys.stl
    • Printing groups/5) SSL Tracks bodys.stl
    • Printing groups/6) SSL Tracks wheels.stl
    • Printing groups/7-8) SSL Track(print with FLEX filament).stl
    • Printing groups/9) SSL Motor space cap(no s).stl
    • Single parts/Body/SSL Body corner part RR + RL.stl
    • Single parts/Body/SSL Body F(no s).stl
    • Single parts/Body/SSL Body frame rear.stl
    • Single parts/Body/SSL Body frame top.stl
    • Single parts/Body/SSL Body RL(no s).stl
    • Single parts/Body/SSL Body RR(no s).stl
    • Single parts/Body/SSL Body side grill R + L.stl
    • Single parts/Body/SSL Body top cap(no s).stl
    • Single parts/Body/SSL Tailgate C-hook.stl
    • Single parts/Body/SSL Tailgate.stl
    • Single parts/Cab/SSL Cab Back window glass frame.stl
    • Single parts/Cab/SSL Cab C-hooks.stl
    • Single parts/Cab/SSL Cab(no s).stl
    • Single parts/Cab/SSL Seat(no s).stl
    • Single parts/Cab/SSL Top window grill.stl
    • Single parts/Cab/SSL Window grill L.stl
    • Single parts/Chassis/Pulley 100T(bore 5mm, width 10mm).stl
    • Single parts/Chassis/Pulley 100T(bore 8mm, width 10mm).stl
    • Single parts/Chassis/SSL Bearing holder 1.stl
    • Single parts/Chassis/SSL Bearing holder 2.stl
    • Single parts/Chassis/SSL Bearing holder 3.stl
    • Single parts/Chassis/SSL Bearing holder 4.stl
    • Single parts/Chassis/SSL Chassis F.stl
    • Single parts/Chassis/SSL Chassis R.stl
    • Single parts/Chassis/SSL Chassis side cap R + L.stl
    • Single parts/Chassis/SSL Motor space cap(no s).stl
    • Single parts/Chassis/SSL Pulley spacer.stl
    • Single parts/Chassis/SSL Tensioner wheel.stl
    • Single parts/Chassis/SSL Track body L.stl
    • Single parts/Chassis/SSL Track(print with FLEX filament).stl
    • Single parts/Chassis/SSL Tracks drive sprocket cap.stl
    • Single parts/Chassis/SSL Tracks drive sprocket hub.stl
    • Single parts/Chassis/SSL Tracks drive sprocket.stl
    • Single parts/Chassis/SSL Tracks Idler wheel.stl
    • Single parts/Chassis/SSL Tracks Indler wheel tube.stl
    • Single parts/Chassis/SSL Tracks Road wheel big.stl
    • Single parts/Chassis/SSL Tracks Road wheel small.stl
    • Single parts/Lift arm/SSL Bucket mount plate(no s).stl
    • Single parts/Lift arm/SSL Bucket(no s).stl
    • Single parts/Lift arm/SSL Lift arm F.stl
    • Single parts/Lift arm/SSL Lift arm link.stl
    • Single parts/Lift arm/SSL Lift arm pipes connectors.stl
    • Single parts/Lift arm/SSL Lift arm rear frame.stl
    • Single parts/Lift arm/SSL Lift arm RL.stl

Learn more about the formats
Last update 2025-04-13 at 10:25
Publication date 2024-05-08 at 10:51
Design number 1977934
AN3DRC_Construction

AN3DRC_Construction

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

3D printed radio-controlled model of a Tracked Skid-Steer Loader (other names are Compact Track Loader, Skid Steer Loader, Bobcat Loader).
You can also find Wheeled version of this model link
You can find Worm gear motors mod for chassis of this model, designed by community member here

See more photos of the model in the slide show!
Video presentation of the model is available here

Build video ep.1: Chassis assembly
Build video ep.2: Body and Lift arm assembly
Build video ep.3: Light module, Cab, Tailgate

Other videos with this skid steer here

To print this model, you need about 2.4kg of filament of different colors and types. Most parts can be printed with any type of filament, such as PLA, ABS, PETG, but tracks must be printed with flexible filament! Therefore, your printer must be able to print with flexible filaments! More information about filament types can be found in the printable parts list: link

All the necessary information for building the model, such as a list of non-printed parts for purchase, a list of fasteners, some characteristics and features of the model, you can find in the assembly instructions for this model: link

In the archive with the model, you can find individual parts as well as parts combined into small groups, which will help you simplify the process of preparing parts for printing. Some print groups are too big for 180x180mm printers, so if you have a printer like that, you need to print these parts from individual parts folder! Some individual parts are too large for 180x180mm printers, so you will need to print these parts from the Alternative Parts folder.
The archive also contains some alternative versions of parts for printers with 300x300mm print area. Some parts are combined, which will simplify the process of assembling the model!

All parts for the model are designed to be printed with minimal using or no material. Check out the printable parts list at the link above!

The main characteristics of the model:
- RC model, 1 : 8.5 scale
- Realistic exterior look and Detailed interior
- Openable tailgate
- Functional lift arm and bucket
- Electric linear actuators used
- Belt drive
- Tracks from flex filament
- 80 printing parts
- 21 printing groups
- 2.4 kg filament
- Can be printed with 180x180mm printers
- Length with bucket - 406mm
- Width - 221mm
- Height - 237mm
For more sizing information, see the assembly instructions at the link above!

Update 09 Sep 2023
Quick tool changing mechanism added.

Update 13 Dec 2023
Added 4 in 1 combination bucket (openable bucket).

Update 26 Jan 2024
Increased size of wire channel inside lift arm.

Update 21 Apr 2024
Added Forks attachments
Added Cab door

Update 04 Jul 2024
Added instruction how to make lights control module with Arduino Micro

Update 20 Sep 2024
Added parts for modifying Lift arm Linear actuators with N30 motors.

Update 06 Oct 2024
Added new Track belt design with more aggressive tooth.

Update 14 Oct 2024
Added modified version of previous Track belt design with bigger distance between toots.

Update 23 Feb 2025
Added a Grapple bucket.

Categories

Construction toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.