Skip to content

The Haunted Manor

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.7/5 (27 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
4 files (ZIP) Close
  • HM -Bambu Lab Studio Project file -v05.zip
    • HM -Bambu Lab Studio Project file -v05.3mf
  • HM -PRUSA Slicer Project Files -v03.zip
    • ALL BASE FENCES -v01.3mf
    • ALL COLUMNS -v01.3mf
    • ALL SKULLLS TOP DECOR -v01.3mf
    • BALCONY UNDERSIDE -v01.3mf
    • BASE PATH -ENTRANCE and BALCONY FLOORS -v01.3mf
    • BASE PATIOS -v01.3mf
    • DEAD TREES -v01.3mf
    • FOUNTAIN STATUE -v01.3mf
    • FRONT DOOR -v01.3mf
    • FRONT GATE - FENCES - TOP DECOR -v01.3mf
    • GARDEN GARGOYLES -v01.3mf
    • GARGOYLES -v01.3mf
    • HOUSE ROOF -v02.3mf
    • HOUSE ROOF SIDES -v01.3mf
    • HOUSE TOP PART -A -v01.3mf
    • HOUSE TOP PART -B -v01.3mf
    • MAIN HOUSE -v01.3mf
    • PUMPKIN TREES -v01.3mf
    • TEMPLE SKULL PLATE Otion 1 -v01.3mf
    • TEMPLE SKULL PLATE Otion 2 -v01.3mf
    • TOPIARY TREES -v01.3mf
    • TREE BASES with PUMPKINS -v01.3mf
    • TREE BASES with SKULLS -v01.3mf
    • WINDOWS SET 1 of 2 -v01.3mf
    • WINDOWS SET 2 of 2 -v01.3mf
  • Haunted Manor PDF Files -v08.zip
    • HM -BASE ASSEMBLY -v02.pdf
    • HM -Color Change parts & Info -v03.pdf
    • HM -FULL ASSEMBLY -v02.pdf
    • HM -HOUSE ASSEMBLY -v02.pdf
    • HM -ROOF ASSEMBLY -v02.pdf
    • MODEL DIMENSIONS -v01.PDF
    • HM -Mat and interact instr -v06.pdf
  • Haunted Manor STL Files -v03.zip
    • FOUNTAIN PARTS/FOUNTAIN A-B-C -v01.stl
    • FOUNTAIN PARTS/FOUNTAIN STATUE -v01.stl
    • FOUNTAIN PARTS/FOUNTAIN WATER -A-B -v01.stl
    • GARGOYLES/GARDEN GARGOYLES -v01.stl
    • GARGOYLES/GARGOYLES -v01.stl
    • GENERAL/ALL BASE FENCES -v01.stl
    • GENERAL/ALL COLUMNS -v02.stl
    • GENERAL/ALL HOUSE CORNERS -v01.stl
    • GENERAL/ALL SKULLLS TOP DECOR -v01.stl
    • GENERAL/BALCONY PARTS--FRONT STEPS--TOP PART -D -v01.stl
    • GENERAL/BALCONY UNDERSIDE -v01.stl
    • GENERAL/BASE BACK LEFT -v01.stl
    • GENERAL/BASE BACK RIGHT -v01.stl
    • GENERAL/BASE FRONT LEFT -v01.stl
    • GENERAL/BASE FRONT RIGHT -v01.stl
    • GENERAL/BASE PATH -ENTRANCE and BALCONY FLOORS -v01.stl
    • GENERAL/BASE PATIO BACK LEFT and RIGHT -v01.stl
    • GENERAL/BASE PATIOS -v01.stl
    • GENERAL/CHIMNEYS -v01.STL.stl
    • GENERAL/FRONT DOOR -v01.stl
    • GENERAL/FRONT GATE - FENCES - TOP DECOR -v01.stl
    • GENERAL/HOUSE ROOF -v02.STL
    • GENERAL/HOUSE ROOF SIDES -v01.stl
    • GENERAL/HOUSE TOP PART -A -v01.stl
    • GENERAL/HOUSE TOP PART -B -v01.stl
    • GENERAL/LOWER WINDOWS and ROOF DECORS -v01.stl
    • GENERAL/MAIN HOUSE -v01.stl
    • LIGHT ADAPTERS/LED STRIP ADAPTER -v01.stl
    • LIGHT ADAPTERS/TOOL MOON LIGHT ADAPTER -v01.stl
    • TEMPLE PLATES OPTIONS/TEMPLE SKULL PLATE Otion 1 -v01.stl
    • TEMPLE PLATES OPTIONS/TEMPLE SKULL PLATE Otion 2 -v01.stl
    • TREE OPTIONS/DEAD TREES -v01.stl
    • TREE OPTIONS/PUMPKIN TREES -v01.stl
    • TREE OPTIONS/TOPIARY TREES -v01.stl
    • TREE OPTIONS/TREE BASES with PUMPKINS -v01.stl
    • TREE OPTIONS/TREE BASES with SKULLS -v01.stl
    • TREE OPTIONS/TREE TRUNKS -v01.stl
    • WINDOWS/WINDOWS SET 1 of 2 -v01.stl
    • WINDOWS/WINDOWS SET 2 of 2 -v01.stl

Learn more about the formats
Last update 2024-10-18 at 19:17
Publication date 2024-06-03 at 14:54
Design number 2040705
fulv

fulv

Certified
Issue with this design? Report a problem.

40 comments

Add a comment

40 comments

chrislmink48
chrislmink48

I just bought this model and I cant seem to find to color filaments thats used to create the model just as you did, can you give me the colors or point me to where they are in the files? Thank you for your time this is an AWESOME model my daughter really loves Halloween and shes gonna love it.

  • 1 like
fulv
fulv

Hello πŸ‘‹,
Thank you for your message and for liking my model of THE HAUNTED MANOR :)

Yes the list of the colors I have used is in the pdf document included in your . The list is in the same pdf document where you find the link to the interactive instructions.

Polymaker has changed the name of their filaments recently but the colors are exactly the same.

Let me know if you have managed to find the colors.

Thank you again for your .

Fulv :)
kutd
kutd

Maybe I missed them ... what are the dimensions of the mansion itself ...thinking about incorporating it into an HO model train garden. Thank you in advance!

  • 1 like
fulv
fulv

Hi, the dimensions are written in the description :)
No problem:

Model Dimensions

When fully assembled (including the base), The Haunted Manor measures approximately:
- 271.8mm (10.7in) x 372mm (14.6in) x 292mm (11.5in)

I hope this helps
Kind regards

Fulv :)
tcwaters
tcwaters

Absolutely Beautiful model.

  • 1 like
fulv
fulv

Thank you πŸ™ so much
drdoom
drdoom

Einfach toll. Alles t perfekt, alles ist leicht zu drucken und mit der Bauanleitung kann quasi nix mehr schief gehen.

  • 1 like
fulv
fulv

Thank you πŸ™ so much
neeva2u
neeva2u

Absolutely fantastic model. Almost done printing all the things. My only suggestion to improve would be to update the Color Change pdf with color numbers associated with the colors listed in the Mat and Interact PDF. :-)

  • 2 likes
fulv
fulv

Thank you πŸ™
In the model of THE TOY FACTORY has a different way to list the colours on the pdf
I think you will find it a little easier :)
Thank you πŸ™ again for your and for the constructive

mrsburgessnc
mrsburgessnc

I see there was an update to the file. If I am in the middle of printing all the parts is it ok to use the new files? :)

  • 1 like
fulv
fulv

Hi Totally yes... just the ROOF part has been updated

  • 1 like
mrsburgessnc
mrsburgessnc

Thanks!
JonathanCh
JonathanCh

That looks super cool! I am thinking about purchasing it or Christmas one. how long does it take to print this one. I use Bambu x1 printer. Thanks in advance.

  • 1 like
fulv
fulv

Nice πŸ‘πŸΌ I have printed this model with an X one myself :) it will take around 7 days depending on how many calors you will decide to use.
Bambu Lab project file included.
godzilla-i4hp
godzilla-i4hp

Can I get a list of what colors were used before buying the files.

  • 1 like
fulv
fulv

Hi πŸ‘‹,
May I ask why you need to list before buying the model?

fulv
fulv

If you are one of my active Patreon subscribers yes you can.
MrTubby
MrTubby

Hi, can I ask roughly how much filament this project uses so I can estimate a total price to build it before purchasing

  • 1 like
fulv
fulv

Hi, it depends form how many colors you decide to use.
1kg per color is more than enough to complete this model.
I have used 8 colors .

I hope this helps :)

Kind regards

Fulv :)

  • 1 like
hbv5sbdgrc
hbv5sbdgrc

That was going to be my question, so one of each is suffice? Thank you for making a kick ass model. Will be printing this soon. Need to order the filament.
CTOMD269
CTOMD269

I am printing the haunted manor and I can not figure out how to make the fuzzy skin setting start at layer 11 on the base patios in Bambu studio. No matter what I do the entire piece comes out with fuzzy skin. Any advice is appreciated. Thanks.

  • 1 like
fulv
fulv

Hi πŸ‘‹,
If you are using the Bambu Lab project files all the settings are already done for you and you should not need to change anything.
Have you accidentally changed the settings from the original file when you ed them?
Which printer are you using?
Please the Bambu Lab project files again open them and when you print the settings will be correct including the FUZZY shin.
Please let me know

Kind regards

Fulvio

CTOMD269
CTOMD269

You were right, it worked. Thanks .

  • 1 like
fulv
fulv

Great πŸ‘πŸΌ
Ray2625
Ray2625

We finished the haunted manor and was beyond impressed with the details, fit and finish of it. This will be around our house for years to come. Thank you.

  • 1 like
fulv
fulv

Hey, Thank you so much for the nice words and for letting me know :)
Please don't forget to the pictures on the model page if you can and on my Facebook group.

Thanks again for your .

Fulv :)
mrsburgessnc
mrsburgessnc

I only have a .4 nozzle and I see the project file uses a .2 nozzle (unless I accidentally changed it! Is a .4 nozzle ok? I have a Bambu P1S

  • 1 like
fulv
fulv

Hi, I have not used 0.2mm nozzle at all. I only used 0.4mm.

  • 1 like
mrsburgessnc
mrsburgessnc

Wondrful news! I am a newby :) Thank you

  • 1 like
nguyenvo
nguyenvo

Please tell us that you're working on a "haunted hill" addition to this model. =)

  • 1 like
fulv
fulv

You will find out tomorrow :)
kritadams1
kritadams1

First of all i want to say that I LOVE LOVE LOVE this model! I am having a problem locating the file for House top part D. The gable eaves to go behind the skull template. could you please tell me where to locate it? Thnak you again for such a wonderful model.

  • 1 like
fulv
fulv

Hi πŸ‘‹
Thank you for your message and for your kind words :)
I am not quite sure which part you mean.
May I ask which slicer are you using? And what printer?
Can you please send me an email with some screenshots or pictures attached for me to understand which part you r are having trouble finding.

My email is:
[email protected]

Thanks πŸ™

Fulv :)
BSmoove
BSmoove

Hi Fulv, I am working through printing this. I cant seem to find the Balcony Underside piece anywhere in the files. Can you please let me know where to find it?

  • 1 like
BSmoove
BSmoove

Nevermind, found it! LOL

  • 1 like
fulv
fulv

HI.... Ok great :)))))
Andres3DWelt
Andres3DWelt

Your Designs are so beautiful, this House makes so fun for printing. Thx fulv

  • 1 like
fulv
fulv

Thank you so much. :)
Fulv:)
StylishJedi
StylishJedi

What kind of does the main building structure require on Bambu A1?

  • 1 like
fulv
fulv

It does not need any . Just print it as it is.
Trust the design :)

Fulv :)

StylishJedi
StylishJedi

You're amazing. It's printing :)
DK0975
DK0975

Sehr schâne Arbeit !! Ich habe selten einen Bausatz gedruckt, der so genau war. Es war keinerlei Nacharbeit nâtig (z.B. schleifen weil etwas nicht gepaßt hat). Super genauigkeit !! Auch die vorgeschlagene Farbauswahl habe ich übernommen, da mir diese sehr gut gefallen hat. Allerdings habe ich die grâßeren Teile die mehrfarbig gedruckt werden sollten, mit dem Meshmixer geteilt und zusammen geklebt. Erst zum Ende habe ich herausgefunden, wie ich das mit dem Filamentwechsel mit meinem Drucker umsetzen kann (Drucker : Sovol SV01). Ich kann dieses Modell (mit Sicherheit auch die anderen HÀ) nur empfehlen !! Top !! Super Arbeit, weiter so !! (Foto´s in den Make´s).

  • 1 like
fulv
fulv

Thank you so much :)

Fulv:)
kintaro159
kintaro159

Bei ALL BASE FENCES en bei mir die Layer Number nicht .
Sind 296 und 331 .
Kann das sein?

  • 1 like
fulv
fulv

Hello πŸ‘‹
Make sure you use adaptive layers in your slicer and it will fit in with the numbers on the pdf document. Different slicers can vary a little but it will be very close to the number I have written.

I hope that this helps.
Let me know.

Fulv :)

DK0975
DK0975

Bei manchen Teilen hatte ich auch Probleme mit den Layern. Ich habe in meinem Slicer (Cura-Slicer) die Layer herausgesucht, wo der Farbwechsel stattfinden sollte. Ist ein klein wenig mehr Arbeit, aber nur drucken kann ja jeder ;-)

  • 1 like
fulv
fulv

That is because you have not selected ADAPTIVE layers I think.
Am I right?

Let me know.

Fulv :)
DanO3DModels
DanO3DModels

A fantastic model. Excellent directions and printed on My Bambu X1 without issue. All pieces fit together perfectly. Wow, wish they were all this good. Nice Job!

  • 1 like
DanO3DModels
DanO3DModels

BTW - worth every penny!

  • 1 like
fulv
fulv

Thank you so much for taking the time to write such a great message / review :)

It is so good when people realize the hard work I put into deg my models and appreciate it.
I do have a face book group if you are interested please it. The group is all about my models.
Here is the link:
https://www.facebook.com/groups/3640031902902646/?ref=share&paipv=0&eav=AfZoL1WvvhXvOw40Q5IHh1jHA8cQNWFTarWRHzkBJp8iFqL6nvWbpAm_nJPjuqKeA-M&_rdr

What will you be printing next?

Thanks again for the great message.

Happy Printing!

Fulvio
vincemblum
vincemblum

I just finished mine and love it and went back to order all the rest of his items

  • 1 like
fulv
fulv

That is great :)
Please don't forget to share the pictures on the model page and on my Facebook group if you can.
I can't wait to see them.

Here is the link:
https://www.facebook.com/share/g/7uS7KXjSagVbuU/

What are you going to print next?

Fulvio :)
dandoe2
dandoe2

This came out amazing!!!! Thank you for the great profile, I didn’t have to make any changes or adjustments to them. I did play around with some of the colors though and changed them so it would look more like the one in the pictures. I used the Bambu files. The build diagrams helped out and were easy to follow. THANK YOU AGAIN.

  • 1 like
fulv
fulv

Thank you so much for letting me know.
You made my day thank you :)
What are you going to print next?

Let me know

Kind regards

Fulv :)
davespond
davespond

Hi, I'm loving the haunted house, printing it now. A bit of confusion with the colours, you have colour numbers listed, but I'm not sure how to go about it. For instance, the colour change of the base patio is easy to follow, but what colour is first? You only have a number listed. Thank you.

  • 3 likes
fulv
fulv

Hi,
Sure I can help you .
Are you using a Bambu Lab printer or PRUSA?
If you would like to replicate the same colours I have used for the BASE PATIO:
1st colour is Galaxy black
2nd colour is Marble Limestone
3rd colour is Army green

I hope this helps.

For th main patio as it has lights underneath make sure the first colour is a light one I have used the following:
1st colour Luminous Orange
2nd colour army purple

I hope this helps :)

Let me know please.

Kind regards

Fulv :)

  • 1 like
davespond
davespond

Thank you, I'm using a Creality Ender-3 V3 KE. So I'm a bit lost with the colours and when to change filaments. It's such a lovely model and I hope to finish it and send you the results.

  • 1 like
fulv
fulv

Great πŸ‘
I al always happy to help so please carry on and finish it you will love it I promise you.
Look at the various pictures on Cults3d and those should help do see the colours. Also take a look at the videos on my YouTube channels.
I am looking forward to seeing your pictures:) don’t forget to them on the model page and on my Facebook group if you can :)
The facebook group is also a useful place where you can ask questions to other people that are printing the same model :)
Here is the link:

https://www.facebook.com/share/QyEKqZXg12gPuifV/?mibextid=K35XfP

Fulv :)

davespond
davespond

Thank you so much. I will the model everywhere!

  • 1 like
fulv
fulv

Thank you πŸ™
cfrank
cfrank

I just noticed that the front door frame is not listed in any of the documents and I don't have an STL file for that. Where is it?

fulv
fulv

Hi,

can you please tell me a bit more information?
You are the only person reporting this so maybe I can help you finding it.

Are you using the Bambu Lab Project file? or are you using a different slicer?

The front door frame is included in the STL file called WINDOWS SET 1 of 2 -v01.stl
If you open that file you will see it.

I hope that this answers your question.

Kind regards

Fulv:)
pieman16
pieman16

Do you have list of filaments and colors you use? I really like.

  • 1 like
fulv
fulv

Yes πŸ‘πŸΌ it is included when you the files :)
cfrank
cfrank

What 2 colors are used for the door? The color change shows purple as one of the colors but doesn't tell what other color was used in the original colors.

  • 1 like
fulv
fulv

I have used purple and Silk chrome :)
jeffamorrison
jeffamorrison

I want to say that I had a nice video call and he walked me through the changing of the and in the print screen to match the plate name. Learn something new everyday. This model is awesome and can’t wait to share pics.

  • 1 like
fulv
fulv

Thank you so much, it was a pleasure to help you.

I am looking forwards to suing your pictures afterwards.
Here are all my social links including my NEW Facebook group where people can post pictures and videos, ask questions and so on.

https://www.instagram.com/fulv_uk/?hl=en

https://www.tiktok.com/@fulv_uk?is_from_webapp=1&sender_device=pc

https://www.youtube.com//fulviopozzoni

https://www.facebook.com/profile.php?id=100072054171280

https://www.facebook.com/fpozzoni/

https://x.com/fulv_uk

My Facebook group:
https://m.facebook.com/groups/3640031902902646/?ref=share

Happy printing :)

Fulv :)
jeffamorrison
jeffamorrison

I loaded my AMS as in the Document, 1 - Ash Grey, 2 - Marble, 3 Purple, 4 - green, 5 Chrome, 6 - black, 7 orange, 8 red. doesn't match instructions
what am I doing wrong

fulv
fulv

Hi,
Thank you for your message.
If you are you using the latest BAMBU Lab project file, you should be using the -v03

The coloursI have used are written on the top left hand corner of each plate, telling you exactly what colour to use in your AMS.

The pdf files colours are only as an example they are not representative of what needs to be use. The document tells you number of colours you need and it allows you to choose what those colours you like the use.

If you want to use the same colours than m and you are not using the Bambu Lab Studio file -v3, take a look at the pdf file called: HM -Matt and interact istr -v03
There you will find the list.

If you would like to write an email to me I can help you more if you need too. My email address is: [email protected]

Let me know how you get on

Kind regards

Fulv :)

fulv
fulv

Please write me an email if you need more help thank you :)
[email protected]

Kind regards

Fulv :)
jeffamorrison
jeffamorrison

I started to print the manor, wow cool design. looking at some differences. you have the base as green but in picture its black, same with fences are purple pic is black. I also don't have all the pages for color change I was printing in plate order but it doesn't follow the print out. I don't want to wist any filament. thanks for your designs

  • 1 like
fulv
fulv

Hi,
Thank you for your message.
If you are you using the latest BAMBU Lab project file, you should be using the -v03

The coloursI have used are written on the top left hand corner of each plate, telling you exactly what colour to use in your AMS.

The pdf files colours are only as an example they are not representative of what needs to be use. The document tells you number of colours you need and it allows you to choose what those colours you like the use.

If you want to use the same colours than me, take a look at the pdf file called: HM -Matt and interact istr -v03
There you will find the list.

If you would like to write an email to me I can help you more if you need too. My email address is: [email protected]

Let me know how you get on

Kind regards

Fulv :)

fulv
fulv

Please write me an email if you need more help thank you :)
[email protected]

Kind regards

Fulv :)
abbyrich
abbyrich

I am really struggling with knowing what color to print first. Plate 2 (Bambu) for instance, I know that is not for the house, but for the roof. The colors show as the same in the slice preview between plates, but how do I know that they are the same color throughout plates? It appears that Ash starts first on plate 1, then marble, but on plate 2 is it the same as plate 1 as they use the same colors? It seems plate 2 would start with marble, then ash? How do I tell for sure?

  • 1 like
fulv
fulv

Hi,
Thank you for your message.
If you are you using the latest BAMBU Lab project file, you should be using the -v03

The coloursI have used are written on the top left hand corner of each plate, telling you exactly what colour to use in your AMS.

The pdf files for the colour changes is only for people that are not using a Bambu Lab Studio project file. The number on the pdf document table is only a general ref number fo telling people how many colours you need for the parts.

I hope it makes sense.

If you would like to write an email to me I can help you more if you need too. My email address is: [email protected]

Let me know how you get on

Kind regards

Fulv :)

fulv
fulv

Please write me an email if you need more help thank you :)
[email protected]

Kind regards

Fulv :)

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.