Skip to content

Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6695.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6693.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6699.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6698.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6694.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6690.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6696.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
IMG_6707.jpeg Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Main_part.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Coin_insert.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
_1.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Lettering__1.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
_2.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Lettering__2.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Lid_.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
foot_16mm.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
foot_20mm.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
foot_24mm.stl Automatic Coin Organizer for Euro with many features | #CULTSXBOX
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
10 files (STL) Close
  • Coin_insert.stl
  • Lettering__1.stl
  • Lettering__2.stl
  • Lid_.stl
  • Main_part.stl
  • _1.stl
  • _2.stl
  • foot_16mm.stl
  • foot_20mm.stl
  • foot_24mm.stl

Learn more about the formats
Last update 2025-04-25 at 05:36
Publication date 2025-04-19 at 11:32
Design number 2914811
TridimensionsDesign

TridimensionsDesign

Certified
Issue with this design? Report a problem.

3 comments

Add a comment

3 comments

designatico
designatico

Amazing design, works perfectly. Thank you very much for sharing.

  • 1 like
TridimensionsDesign
TridimensionsDesign

Thank you very much, happy to hear that :)

  • 1 like
claudia3grodriguez
claudia3grodriguez

Un diseño estupendo! me ha encantado.
Aunque tengo un par de problemas: las monedas de 50 ct no se deslizan correctamente por la ranura, hay que empujar la moneda con un lápiz o algo afilado. Y las de 2€ se quedan trabadas al final de la pieza "coin_insert". No llega al carril para deslizarse.
Te lo comento para que lo puedas tener en cuenta para futuras modificaciones del diseño. En mi caso, lo he arreglado dando la pieza de sí.
Muchas gracias por todo!

  • 1 like
TridimensionsDesign
TridimensionsDesign

Thank you very much for your nice , happy you like the design. A problem with not quite exactly fitting sizes can be caused by not accurate print settings. I would recommend you to print the part with a lower extrusion rate or use s on critical overhangs. This will probably fix the problem, as the stl files are already optimised for the exact coin sizes. Different printers and settings may cause a little different outcomes. But I’m happy to hear you could solve the problem.
leongrechza
leongrechza

Hey really cool design!
I'm printing it right now and noticed that the 1 has no filets in the part that slides into the main part but the 2 has fillets there.
Is that on porpouse or did you fotgot to put filets in the first ?
in the main part there are no fillets in all of the slots.

  • 1 like
TridimensionsDesign
TridimensionsDesign

Hey, thanks for your nice , happy to hear you like the design :)
I’m not 100% what you mean with „filets“ but I just checked the files and they are correct. If you mean the elongated cutouts, they are actually on purpose to see how many coins are in there. I hope I could help you, please let me know if I understood that right.

  • 1 like
leongrechza
leongrechza

The corners are rounded on one slot and on the other they are at a normal 90 degree angle

  • 1 like
TridimensionsDesign
TridimensionsDesign

Ah yes, now I get it. You are right, I added the rounded corners on one the as this one was a little difficult to slide in. This problem accured only on one side, that’s why it is just on one .

leongrechza
leongrechza

I found a bug in 1 that the part you press into the main body is not attached to the . on the second its attached.

  • 1 like
TridimensionsDesign
TridimensionsDesign

You are right, there was a bug. I just fixed it. Thanks for finding it, Although I think even with the bug the part should have printed just fine if s were activated.

  • 1 like
leongrechza
leongrechza

Good, thank you very much!
I printed it with s but it snapped off because the top surface of the was closed so it had no grip. Will reprint it this afternoon

  • 1 like
TridimensionsDesign
TridimensionsDesign

Perfect, happy I could help you

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.