VenuSub Lock - External Flying Head Cages V1 - Male Chastity System

VenuSub

Unlock The Goddess In You

The VenuSub Lock series of male chastity products are designed to make an easy-to-manufacture, easy-to-use, and highly comfortable chastity cage system which is secured with a traditional key and an integrated tube-style lock. This is preferable in situations where there is a keyholder, but the wearer wants the option to swap out cages quickly and easily with permission from the keyholder.

This is the first iteration of the external "flying head" style of cage. It securely but comfortably holds the glans, while allowing foreskin and the scrotal sack to completely surround the cage. It also has a full slit along the bottom, to aid in urination and to accommodate piercings. Finally, the side holes and thick glans ring at the base completely prevents "turtling" and makes pulling out nearly impossible.

To put it on, you have to use a tiny amount of lube on your head. After the lube is washed out, you will not slip or move at all. If somehow you do need to readjust to go pee, you can do so through the side holes and slit. It will come off fairly easily when the cage is unlocked, but it will not be so easy when the cage is locked onto the ring. Make sure you tuck your scrotum up and over the top of the cage on the edges, as this design is meant to sink your head into your scrotum, and it provides room to accommodate that without pinching. Failing to tuck properly will result in discomfort!

These cages the following ring options:
- VenuSub Lock Flat Rings V1

There are numerous sizes for a customizable experience. If you need additional sizes, please let me know and I will make it and add it here for no additional cost.

This idea was developed by the Reddit u/gaypenisowo. With their permission, I have made my own version.

Please note that while I have extensively tested this design on myself and several friends, I still consider it somewhat experimental. It is possible that some of the dimensions may need to be tweaked slightly to allow a more universal fit. I encourage you to make a detailed review of your experience in the comments, and if there is a fitment issue, I will work with you to tweak the design and fix it. The first 10 people to provide a detailed review (with specific ideas on how to fix any problems they encounter) will receive a coupon code for 50% off the next iteration of this design and the base rings!

Here is a list of planned changes/additions to accommodate more people:
- Make a "large head" subvariant for people who find the standard size too small for comfort

Here is a guide to decoding the part numbers of the STL files:
VSL-CEF1-xx
VSL = VenuSub Lock series
CEF1 = Cage, External, Flying head, version 1
xx = the length from the tip of the cage to the front of the ring, in millimeters

Preferred Material: Unadulterated White ABS

Nozzle Size: 0.4mm or smaller
Layer Height: 0.2 mm
Outlines/Shells: 2
Infill: 100%
s: As fine as possible, 45 degrees, may need to decrease horizontal separation to minimize curling
Additional Slicer Notes: Print the part as solid as possible.

Post Processing Suggestion:
1. Carefully remove the material with a small, firm object. I like to use the key to the lock I plan to use.
2. Sand the rough edges and imperfections down using 220 grit sandpaper. (Make sure not to breathe in the dust!) Pay extra special attention to the side holes, as the overhangs tend to curl and produce a serrated edge!
3. Dip just over half of the part in liquid acetone for 10 seconds. "Feather" the dipping line by gently moving/rotating the part so that the liquid interface is never in the same spot for more than a moment.
4. "Shake off" excess pooled acetone by moving your arm quickly in a circular motion 2-3 times, like you were preparing to throw the part. Make sure no liquid remains in the small holes or on the surface. DO NOT BLOW ON THE PART or you will get white spots.
5. Let dry for at least 10 minutes. Ideally you will hold the part by hand for 1-2 minutes, then carefully set the part down on a smooth surface like glass, balanced so that only 2-3 points are touching the surface. DO NOT TOUCH THE WET SURFACE UNTIL THEN!
6. Dip the second half for 10 seconds, making sure not to miss any areas. Feather the dipping line again.
7. "Shake off" again, making sure no liquid acetone remains in the holes or on the surface.
8. Let dry for at least 10 minutes before handling gently, again hanging by the dry section you were grabbing.
9. Set the part in a safe place and allow to dry for a full 12-24 hours before use.

Additional Required Hardware:
Each VenuSub Lock cage and ring combo needs the following hardware:
- 1x Universal Tube-Style Chastity Lock

You can make the second emergency key able by encasing it in this key card.