Skip to content

WHEELBARROW

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0/5 (0 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
13 files (PDF and STL) Close
  • ASSEMBLY INSTRUCTIONS.pdf
  • CONNECTION BRACKET.stl
  • DX .stl
  • HANDLE.stl
  • SX .stl
  • TIRE.stl
  • WHEEL FORK.stl
  • WHEEL HUB NUT-OPEN.stl
  • WHEEL HUB.stl
  • WHEEL NUT-CLOSED.stl
  • WHEEL RIM.stl
  • WHEELBARROW CONTAINER.stl
  • WHEELBARROW FRAME.stl

Learn more about the formats
Publication date 2025-02-07 at 16:18
Design number 2716623
HARMONYA

HARMONYA

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

This charming and fun 1:6 scale wheelbarrow is the original idea for presenting chocolates and candies to your guests. It lends itself to multiple everyday uses: a catch-all, a holder for objects, pens, or a mobile phone. You can place it on your favorite table or piece of furniture, sparking the curiosity of friends and relatives. You can display it in your shop or storefront as a conversation piece, and it will certainly not go unnoticed. The model has measurements and tolerances in the ts optimized for PLA printing. All the parts that make up this delightful wheelbarrow are interlocking, so no glue is needed. The few overhanging parts are pre-ed. Considering the round section of the main frame, it must still have a minimal surface with the print bed, so the entire area of about 2.5 mm is flat. For a better visual result, I recommend lightly sanding the wheelbarrow frame in the area that will be slightly flattened, as well as the points where the s have left marks. With this adjustment, you will improve the quality of the printed object, ensuring an absolutely professional look to your work. The wheelbarrow's wheel is perfectly mobile, thanks to a piece of your 1.75 mm diameter PLA filament, which is simply secured by crushing the ends protruding from the hole of the small nuts with pliers. Don't worry, both the printing and assembly of this small display wheelbarrow have been designed to be easily accomplished even by beginners, simplifying every step of the process. As usual, both the printing and assembly are thoroughly explained with images and a pdf instructions sheets. So, what are you waiting for? Aren't you curious to see this charming object in your home, shop, or office?

3D printing settings

Model for FDM printers.
3D printing settings: (2x pieces) WHEEL RIM (Slicer CURA)
Size: 40,6x40,6x5,7mm
Material: GIANTARM PLA YELLOW-PLA GEETECH RED
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 30%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 10gr
Printing time: about 1 hour and 30 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: TIRE (Slicer CURA)
Size: 64,5x64,5x7mm
Material:ESUN PLA BLACK
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 30%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 17gr
Printing time: about 2 hours and 10mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: (4 pieces) WHEEL HUB (Slicer CURA)
Size: 7x7x8,4mm
Material: SUNLU PLA SILVER SILK
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 30%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 1gr
Printing time: about 13 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: (2+2 pieces) WHEEL HUB NUT TWO VERSIONS OPEN and CLOSED (Slicer CURA)
Size: 9x9x5mm
Material: SUNLU PLA SILVER SILK
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 30%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 1gr
Printing time: about 10 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: WHEEL FORK (Slicer CURA)
Size: 37,5x70x6,8mm
Material: CC3D PLA GREEN GRASS
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 50%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 6gr
Printing time: about 52 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: WHEEL BARROW CONTAINER (Slicer CURA)
Size: 100x150x57,5mm
Material: CC3D PLA GREEN GRASS
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 20%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 52gr
Printing time: about 7 hours and 45 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: WHEEL BARROW FRAME (Slicer CURA)
Size: 283x112x18mm
Material: CC3D PLA GREEN GRASS
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 50%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 20gr
Printing time: about 3 hours and 10mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: SX/DX S (Slicer CURA)
Size: 84x74,5x7mm
Material: CC3D PLA GREEN GRASS
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 50%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 5gr
Printing time: about 50 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: CONNECTION BRACKET (Slicer CURA)
Size: 85x14x3,4mm
Material: CC3D PLA GREEN GRASS
Hoten3d: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 50%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 2gr
Printing time: about 20 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Model for FDM printers.
3D printing settings: (2x pieces) HANDLE (Slicer CURA)
Size: 14x14x34,5mm
Material: GIANTARM PLA YELLOW-PLA GEETECH RED
Hotend: 200°C
Bed: 60°
Nozzle: 0.4
Layer Height: 0,16
Walls: 4
Top/Bottom layers: 5
Infill: 30%
Infill Type: lines
Fan speed; 100%
Skirt: 3 lines
Weight: 5gr
Printing time: about 42 mins
Printed on ANYCUBIC PREDATOR at 50 mm/sec.
NO S REQUIRED!

Categories

Home

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.