Came up with an alternative profile that saves about 30% plastic that I'm a fan of. Printed on a Bambu X1 so you may need slower speeds.
DoubleShelf_WithTabls.sl
Vase Mode: 80g PLA
Custom: 56.5g PLA
Line Size: .2mm x .4mm
Outer wall Speed: 200mm/s
Infill speed: 270mm/s
Infill Percentage: 5%
Infill Pattern: 3D Honeycomb
Prints perfectly in 1h55m. Probably takes about 2x as long but has some nice plastic savings. The percentage and pattern work well for this design and the design itself minimizes the amount of infill needed. Infill lets us get away with thinner walls while the table still feels about as sturdy.
- 1 like
Looking for 150mm width (well, 6.5", close enough)...
Hi. I do have a 150mm version available. I haven't ed it with the main design, as I want to maintain stacking compatibility between all sizes, but if you me after purchase I can send a link to the 150mm version.