Skip to content

Bordeaux, The Octopus Wine Holder

bto.gif Bordeaux, The Octopus Wine Holder
00.png Bordeaux, The Octopus Wine Holder
01.png Bordeaux, The Octopus Wine Holder
02.png Bordeaux, The Octopus Wine Holder
03.png Bordeaux, The Octopus Wine Holder
04.png Bordeaux, The Octopus Wine Holder
Bordeaux_The_Octopus.stl Bordeaux, The Octopus Wine Holder
Bordeaux_The_Octopus_3_2.stl Bordeaux, The Octopus Wine Holder
Bordeaux_The_Octopus_3_45.stl Bordeaux, The Octopus Wine Holder
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.7/5 (15 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
4 files (PDF and STL) Close
  • Bordeaux_The_Octopus.stl
  • Bordeaux_The_Octopus_3_2.stl
  • Bordeaux_The_Octopus_3_45.stl
  • Bordeaux_The_Octopus_Ree.pdf

Learn more about the formats
Last update 2025-04-16 at 16:11
Publication date 2022-09-20 at 14:19
Design number 854138
STLFLIX

STLFLIX

Certified
Issue with this design? Report a problem.

30 comments

Add a comment

30 comments

phillipsvb
phillipsvb

Amazing file. I scaled it to 103.85% on my P1S and it fit the 750ml Kraken bottle perfectly.

  • 1 like
robertfield
robertfield

Does anyone know the scale needed to fit a full size kraken bottle?

garygnu
garygnu

Awesome question, I wanted to try with my Kraken bottle as well!

phillipsvb
phillipsvb

I scaled it to 103.85% on my P1S and it fit the 750ml Kraken bottle perfectly.
VT88
VT88

Does this print use a full filament spool? Or do I need to get two?

robertfield
robertfield

It will use roughly half a roll of 1kg filament
MrKlubby
MrKlubby

Ein super tolles Model welches sich gut ohne Stützen auch drucken lässt. - Klasse 👍🏼
michael_harris_
michael_harris_

what scale do I need to fit a 70cl bottle of Kraken? That would be the perfect bottle for this but I don't know what scale I would need and if my Bambu P1S would even big big enough to make it! Does anyone know before I buy the file!?
fxg4
fxg4

This model printed very well, no s and it only took 25.2 hours in a Bambulab X1C, 0.12mm layer height and 3 wall loops, everything else default...
https://youtu.be/pSz1Y813bA8
oldguy
oldguy

perfect print
So scarry, no s, per designer.
BORDEAUX 3-45-1
KOBRA PLUS .6 noz .3 layer.
190 Temp, bed 60, flow 98%
1.2 walls and top/bottom,
Speed 50, infill 60 zig zag 10%.
Outside / in, retrac 5/50
Coasting, thin walls
540grams appox.
CC3D COPPER PLA

https://www.facebook.com/photo/?fbid=2417305291798894&set=a.632708070258634&__cft__[0]=AZUd33snGJHCR9DvM6JBCUWDu9LH6HsfqtdqiLNNlt6xrSmKjPAV9eVn517al3iuLnbzPag_B8G3Q139xnnxjFv2-vhJrQj41tW0S_-76XpXlLGiMvUxdZQjmh37GmAA82bDxQ5KdOJosMr6OX5BxNkzgGxWxj8m2rfPJ-Xl3bQAZNrchw0n19Unj4g5kDJoljVXDvctPJtmX4PNtt8gBvsE4kpIGvtyu_EeVqZQ4GGhxolz0mA6A3AVYhVU-wWD1CA&__tn__=EH-y-R]-R

oldguy
oldguy

26 hours+-
4whlsatv4life
4whlsatv4life

Technically, this file shouldn't be being sold. That's not how the STLFLIX subscription is meant to work. It's for subscription owners to be able to sell the models, not the files. This undermines everyone else who is a subscriber
Juice1080
Juice1080

Can you make the model MMU friendly by making the eyes and pupils separate bodies?
connorwhitesell
connorwhitesell

DO NOT PURCHASE! was corrupt and i emailed them . tried reing, uninstalling slicers, trying different slicers, and still corrupt file unprintable. Asked for a refund and they ghosted me and havent returned the last 4 emails. Payed 17$ for an unprintable model

oilmanneat0f
oilmanneat0f

All the s have worked for me….

  • 1 like
impaler81
impaler81

It's totally fine, hence the reviews and pictures. Looks like error between chair and keyboard.
compteacher
compteacher

Can anybody tell me the print volume for these files? I don't want to purchase it and then find it won't fit my printer.

corbinbrown
corbinbrown

165x207x290mm

  • 1 like
ltr_mars_81
ltr_mars_81

Bonjour,

Je possède le fichier Bordeaux_The_Octopus

Je dois mettre combien de % pour avoir en 3,20 et 3,45.

Merci
carriepunger
carriepunger

We printed this file on a bamboo P1P and at 94% the print shifted and an inch later shifted. There was minimal added. Any thoughts about what to do differently so this doesn't happen again? Thank you!
EWI
EWI

I just bought this file on myminifactory, but there you have not updated your file to fit normal bottles like you have here.
So mine came out to small…even though I increased to 102% like one comment recommended.

The files should be the same on all platforms when you fix obvious mistakes with the design!

If it is just a resizing, can you give the% increase for the 3,45 bottle so that I can adjust mine before I print again?

ltr_mars_81
ltr_mars_81

Avez-vous trouvé le %

MalsBrownCoat
MalsBrownCoat

I've emailed them 4 times about this and haven't even received an acknowledgment of the messages.
ginasg
ginasg

The price of this model has raised by a lot! I came back to buy it as a trial for STL Flix and now it costs too much. PLUS in the text above it says the STL Flix subscription is still $9.90 for a month but it has raised to $15. I just can't afford it now.
BudFox77
BudFox77

The model is really well done, unfortunately I realized that it is not possible to print it with QIDI XPlus because the Z axis exceeds 200mm.

I recommend designer to add X,Y,Z size on product description.

It would be great if you add a version with the Z axis within 200mm.
thenixhex311
thenixhex311

How are you (or are you) trying to stop ALL these people selling these prints in Etsy? There's hundreds of them!

STLFLIX
STLFLIX

Hello, thenixhex311!

We are constantly reporting these listings from Etsy using this link: Etsy Report. But unfortunately the report takes some time to be evaluated.

Please, feel free to us in case of any questions or to send us the link of these listings.

Thank you!

Best regards.

Best regards,
STLFLIX

oilmanneat0f
oilmanneat0f

In fact it printed beautifully without s! An incredible design though I will reprint at 104% to accommodate a wider range of bottles.

  • 1 like
STLFLIX
STLFLIX

Hello, oilmanneat0f!

That's great! Thank you for the ! Please, share the results with us by posting a picture in the makes section.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

Juice1080
Juice1080

You should fix this file. A quick Google search will tell you common wine bottles are 3-3.2" in diameter, this is designed around the 3" diameter with zero clearance from what I can tell. I highly recommend people scale it 115% so the opening is 3.45" until these guys fix the model, if they ever do. 3.45" should fit everything but maybe some Champagne bottles.

STLFLIX
STLFLIX

Hello, Juice1080!

Thank you for the ! We have reviewed the description of this model and ed a new version scaled up.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

  • 1 like
oilmanneat0f
oilmanneat0f

I just bought this. There are large horizontal parts of the model and for the life of me I dont understand what settings will permit this to print without s? Can anyone post their Prusa Slicer settings?

STLFLIX
STLFLIX

Hello, oilmanneat0f!

This model was designed to be printed without . However, you may need to use custom s to the model according to your printer. ( for this reason you may see some people being able to print without , while others can not)

The parameters above (in the description of the model) are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Please, feel free to us in case of any questions!]

Best regards,
STLFLIX

STLFLIX
STLFLIX

Hello, oilmanneat0f!

We have reviewed the description of this model and added a new version scaled up.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

cyndi2
cyndi2

better explaination about slicing setting woulb be great cant print one at all

STLFLIX
STLFLIX

Hello, cyndi2!

We have reviewed the description of this model and added a new version scaled up.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

andypwebb
andypwebb

Great print took 34 hours to print came out great

STLFLIX
STLFLIX

Hello, andypwebb!

That's great! Please, share the results with us by posting a picture in the makes section.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

EdMski
EdMski

Hello all, I printed it at 100% scale and it can fit a bottle that is 7.5cm in diameter. I also printed without s at 50mms and it took about 106hrs.. however there were no issues and it printed wonderfully. Took about 450grams of material with a 15% gyroid infil.

STLFLIX
STLFLIX

Hello, EdMski!

Thank you for sharing your experience with this model with us! Please, share a picture in the makes section. 😉

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

Phill7782
Phill7782

minimum bed size?

STLFLIX
STLFLIX

Hello, Phill7782!

An Ender 3 bed size (235 x 235 mm) would fit very well. The dimensions of this model are:

X: 165.636mm
Y: 207.74mm
z: 207.74mm

Please, feel free to us in case of any questions!

Best regards,
STLFLIX Team
mike23
mike23

3 Days?! What infill? 100%?

STLFLIX
STLFLIX

Hello, mike23!

As the model Bordeaux, the Octopus is a very detailed and large model, the print needs more time to finish.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX Team
Thedid63
Thedid63

Hi , I've buy it but i have one question please? What the perimeters 3 ,

STLFLIX
STLFLIX

Hello, Thedid63!

The info "Perimeters=3" refers to the number of walls. In cura slicer you may see it on "Walls" -> "Wall Line Count".

Please, feel free to us in case of any questions!

Best regards,
STLFLIX Team
tarasiebrt
tarasiebrt

Printed beautiful on my Kobra plus, great stl, ty

STLFLIX
STLFLIX

Hello, tarasiebrt!

That's great! Please, share the results with us by posting a picture in the makes section .

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

  • 1 like
ExSerCo
ExSerCo

Loved the idea of this design.
Honestly, it looks great.
But you say that it doesn't need s?
Well, running it in my Prusaslicer, it definatly needs s at 0.15mm layers.
Even slicing at 0.20mm layers it needs s.
So this kind of a rip-off. I payed for something that can't work as proposed.
If I was able to pics with this comment, I could prove my word.

  • 3 likes
Tankr32
Tankr32

https://www.tiktok.com/t/ZTRgQcdq4/
I printed fine without s. You can check out my video on it.

Foreignflavors
Foreignflavors

I printed without s and even scaled it 105% with no issues. However, it did take almost 5 days to complete.

a_l_ewing
a_l_ewing

I am in agreement, parts of this model do require (specifically layer 13, at 0.12 layer height), the rear most tentacle has a part starting in mid air . It will print without s and you probably wouldn't notice the failed areas. However the model is sold stating no s required, not true. I resolved myself by adding s and then blocking all above layer 25. Also wish I could add images to this thread.

  • 2 likes
dusti
dusti

post them in the makes post js

STLFLIX
STLFLIX

Hello, ExSerCo!

This model was designed to be printed without . However, you may need to use custom s to the model according to your printer. ( for this reason you may see some people being able to print without , while others can not)

The parameters above (in the description of the model) are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

reefkeepx
reefkeepx

Having trouble printing this one, about layer 50 is starts falling apart.

STLFLIX
STLFLIX

Hello, reefkeepx!

Could you please give us more details about this issue:
What slicer was used...
What is the layer height defined...
Have you changed the filament?

We will be waiting for your reply to better help you.

Please, feel free to us in case of any questions!

Best regards,
STLFLIX

timbkroemer
timbkroemer

What size is this? Can it be printed on a Prusa MINI?

seca3d
seca3d

Peut-il être imprimé sur une Prusa MINI ?

STLFLIX
STLFLIX

Hello, timbkroemer!

Due to the size of the model BORDEAUX, THE OCTOPUS, it would not fit in a Prusa MINI. The dimensions of this model are:

X: 165.636mm
Y: 207.74mm
z: 207.74mm

Please, feel free to us in case of any questions!

Best regards,
STLFLIX Team

STLFLIX
STLFLIX

Bonjour, seca3d!

En raison de la taille du modèle BORDEAUX, THE OCTOPUS, il ne rentrerait pas dans une Prusa MINI. Les dimensions de ce modèle sont :

X: 165.636mm
Y: 207.74mm
z: 207.74mm

S'il vous plaît, n'hésitez pas à nous er en cas de questions!

Cordialement,
STLFLIX Team

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.