Bright Art Collection

Bright Art Collection

If you’re looking for a way of transforming your home ambience, your future just got brighter. Extra Drop #20 – Bright Art is here to prove that there’s a light at the end of the tunnel after all.

These stunning wall lights are the perfect way to make a drastic atmospheric change to your space by casting the light of creativity into the shadows of the ordinary.

There are six different models for you to choose from: just print your pick, assemble it following our instructions and watch the magic happen right in front of your eyes.
We’ve put together a supplies list with everything you’ll need and the assembly instructions so you’re not left in the dark.

Come and share this bright idea with us!

Your Pop Up Light requires some assembly. Follow the instructions on Ree file!

What you’ll need:
Printed light LED Module
Battery Holder 12V
On-Off Switch
Solder
Soldering Iron
Electric Wire

At this pack you will get:

Bald Eagle Wall Light:
3D Printing Time: 17 Hours 13 Minutes
Approximately Height :  21,9 cm

Pegasus Wall Light:
3D Printing Time: 18 Hours 33 Minutes
Approximately Height :  19,2 cm

Great Lion Wall Light:
3D Printing Time: 1 Day 05 Hours 43 Minutes
Approximately Height :  16,8 cm

Night Owl Wall Light:
3D Printing Time: 23 Hours 37 Minutes
Approximately Height :  12,3 cm

Dream Fairy Wall Light:
3D Printing Time: 09 Hours 13 Minutes
Approximately Height :  20 cm

High Elk Walk Light:
3D Printing Time: 20 Hours 23 Minutes
Approximately Height :  18,5 cm

This STL file is recommended for FDM Printers!

Have full access to our library from day one, over 1000 stls! STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for 3D-Printing Models. Get started with the Ultimate STL platform!

Click here to STLFLIX

COPYRIGHT & SELLING RIGHTS

This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.

To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 1000 STL files, unlimited s, and marketing content for every single file.

Go commercial and skyrocket your own store with STLFLIX!

GO COMMERCIAL!

USEFUL LINKS

Get to know us a little better!

Website | Instagram | TikTok | Twitter

What are you waiting for? thousands of other makers from all around the world.

HAPPY PRINTING!

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
Recommended Initial Layer Height:  0.20 mm
Recommended Layer Height:  0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs : We have printed ours without s (note that if you choose to print this way, the inside of your print will have poor finishing. You can always use s to make your print better)
Build Plate Adhesion: Skirt.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.