Skip to content

1/14 RC EXCAVATOR - Anchor 16

Main.jpg 1/14 RC EXCAVATOR - Anchor 16
loading.jpg 1/14 RC EXCAVATOR - Anchor 16
ben1.jpg 1/14 RC EXCAVATOR - Anchor 16
manual.jpg 1/14 RC EXCAVATOR - Anchor 16
dimensions.jpg 1/14 RC EXCAVATOR - Anchor 16
ben2.jpg 1/14 RC EXCAVATOR - Anchor 16
sand.jpg 1/14 RC EXCAVATOR - Anchor 16
loading-2.jpg 1/14 RC EXCAVATOR - Anchor 16
ben3.jpg 1/14 RC EXCAVATOR - Anchor 16
ben4.jpg 1/14 RC EXCAVATOR - Anchor 16
ben5.jpg 1/14 RC EXCAVATOR - Anchor 16
ben6.jpg 1/14 RC EXCAVATOR - Anchor 16
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Anchor16 v1.03 by Burnie222rc.zip
    • BuildManual/Kitten 394 Excavator Build.url
    • BuildManual/Vulpa 505 Excavator Build.url
    • STL/ArmsV5A/boom cylinder motormount.stl
    • STL/ArmsV5A/boomA.stl
    • STL/ArmsV5A/boomB.stl
    • STL/ArmsV5A/boomC.stl
    • STL/ArmsV5A/boomOutA.stl
    • STL/ArmsV5A/boomOutAm.stl
    • STL/ArmsV5A/boomOutB.stl
    • STL/ArmsV5A/boomOutBm.stl
    • STL/ArmsV5A/boomOutC.stl
    • STL/ArmsV5A/boomOutCm.stl
    • STL/ArmsV5A/bucket cylinder motormount.stl
    • STL/ArmsV5A/BucketLinks.stl
    • STL/ArmsV5A/cylcover.stl
    • STL/ArmsV5A/stick cylinder motormount A.stl
    • STL/ArmsV5A/stick cylinder motormount B.stl
    • STL/ArmsV5A/StickA.stl
    • STL/ArmsV5A/StickAm.stl
    • STL/ArmsV5A/StickB.stl
    • STL/ArmsV5A/StickBm.stl
    • STL/Cabin/Cab Details.stl
    • STL/Cabin/Cab Door.stl
    • STL/Cabin/Cab Interior Chair.stl
    • STL/Cabin/Cab Interior Main.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Cabin/Cab Side.stl
    • STL/Overcarriage/Beam DRV F.stl
    • STL/Overcarriage/Beam DRV R.stl
    • STL/Overcarriage/Beam PAS F.stl
    • STL/Overcarriage/Beam PAS R.stl
    • STL/Overcarriage/Boom Cylinder Mount.stl
    • STL/Overcarriage/Boom mount DRV.stl
    • STL/Overcarriage/Boom mount PAS.stl
    • STL/Overcarriage/Chassis Rear.stl
    • STL/Overcarriage/Chassis Side DRV F.stl
    • STL/Overcarriage/Chassis Side DRV R.stl
    • STL/Overcarriage/Chassis Side PAS F.stl
    • STL/Overcarriage/Chassis Side PAS M.stl
    • STL/Overcarriage/Chassis Side PAS R.stl
    • STL/Overcarriage/CounterWeight split A.stl
    • STL/Overcarriage/CounterWeight split B.stl
    • STL/Overcarriage/CounterWeight.stl
    • STL/Overcarriage/Fake Cylinders.stl
    • STL/Overcarriage/Front Hatch.stl
    • STL/Overcarriage/Main Floor A.stl
    • STL/Overcarriage/Main Floor B.stl
    • STL/Overcarriage/Mid Brace DRV.stl
    • STL/Overcarriage/Mid Brace PAS.stl
    • STL/Overcarriage/Mirrors.stl
    • STL/Overcarriage/Motor Cover.stl
    • STL/Overcarriage/Outside DRV F.stl
    • STL/Overcarriage/Outside DRV R.stl
    • STL/Overcarriage/Outside PAS F.stl
    • STL/Overcarriage/Outside PAS R.stl
    • STL/Overcarriage/Top DRV F.stl
    • STL/Overcarriage/Top DRV R.stl
    • STL/Overcarriage/Top PAS F.stl
    • STL/Overcarriage/Top PAS R.stl
    • STL/Undercarriage/3d printed Slewring/inside main 52t.stl
    • STL/Undercarriage/3d printed Slewring/inside top.stl
    • STL/Undercarriage/3d printed Slewring/outside bottom.stl
    • STL/Undercarriage/3d printed Slewring/outside mid.stl
    • STL/Undercarriage/3d printed Slewring/outside top.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/3dTdrivesprocket A.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/3dTdrivesprocket B.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/3dTgro54.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/BottomRollers.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Front inside M.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Front inside.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Front Outside M.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Front Outside.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Idlewheel.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Rear inside M.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Rear inside.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Rear outside M.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Rear outside.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/TopRollers.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/track tensioner.stl
    • STL/Undercarriage/SlewRing hole Template.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Front Inside M.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Front Inside.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Front Outside M.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Front Outside.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Main beam front.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Main beam rear.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Rear Inside M.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Rear Inside.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Rear Outside M.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Rear Outside.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Steel Chain BottomRollers.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Steel Chain Drive Sprocket.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Steel Chain Top Roller.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Steel Chain Track Tensioner.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Steel Chain Tracks x10.stl
    • What you need/What you need 3d Printed Slewring.txt
    • What you need/What you need 3d printed Tracks.txt
    • What you need/What you need Screws.txt
    • What you need/What you need Steel Chains.txt
    • What you need/What you need Steel SlewRing.txt
    • What you need/What you need.txt
    • Anchor 16 DXF files/Boom.dxf
    • Anchor 16 DXF files/Overcarriage Floor.dxf
    • Anchor 16 DXF files/Stick.dxf
    • Anchor 16 DXF files/Undercarriage Bottom.dxf
    • Anchor 16 DXF files/Undercarriage Top.dxf
    • STL/Bucket/STL/knife.stl
    • STL/Bucket/STL/rearwallA.stl
    • STL/Bucket/STL/rearwallB.stl
    • STL/Bucket/STL/sideA.stl
    • STL/Bucket/STL/sideB.stl
    • STL/Bucket/STL/teeth with brim.stl
    • STL/Bucket/STL/teeth without brim.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/Middle.stl
    • STL/Undercarriage/3d Printed Tracks Undercarriage/MiddleM.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Middle.stl
    • STL/Undercarriage/Steel Chain Undercarriage/Middle M.stl
    • STL/Overcarriage/Akerman Exhaust.stl
    • STL/Undercarriage/Swingmotor Mount steel slew.stl
    • STL/Undercarriage/3d printed Slewring/swingmotor Mount 3d printed slew.stl

Learn more about the formats
Last update 2024-04-13 at 11:45
Publication date 2024-02-29 at 12:33
Design number 1823833
burnie222

burnie222

Certified
Issue with this design? Report a problem.

Template info

3D model description

EDIT:
13th April 2024 - Fixed the 3d Printed Slewring motormount file. The holes didnt line up with the slewring. V1.03 to get the update.
11th April 2024 - Added the missing Exhaust file. V1.02 to get the update!
12th March 2024 - Fixed a minor mistake in Middle.stl and MiddleM.stl in undercarriage files for both 3d printed tracks and steel chain tracks files. V1.01 to get the update.

Build yourself a fully electric hobbygrade excavator.
The model is a 1/14th scale 43 ton excavator.

Printable on a 22x22 buildplate!

Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.

101 page detailed build manual to provide as much information and help as I possibly can!

-Choose between 3d printed tracks, or steel chain tracks!
-Powerful JGB37-555 motors will provide all the digging force you would ever want.
-Powerful 5840-31zy motors for the tracks!

Runs off a 3s 11,1v LiPo battery.

I have tried my best at making all the parts as friendly as I possibly can. All parts are exported in the desired printing orientation!

This project is a combination of 3d printing, and metal works. So you will need tools for cutting metal, and drill holes.
DXF files for laser\cnc machines are included.

I will say that this is a very timeconsuming build, so youll need to be prepared to use some time on it.

You will need alot of different screws and hardware, list is included.

This Excavator model is compatible with the electric 40-70 ton quick coupler in my profile here:
https://cults3d.sitegames.net/en/3d-model/gadget/quick-coupler-40-70-ton-class

IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide.

Categories

Home

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.