Retractable Snowman sword - Print in Place

Bring some Christmas fun to your collection with this unique Retractable Sword Snowman! This model features a print-in-place, retractable sword mechanism, allowing you to print it in a single go without assembly. Available in both STL and OBJ file formats, it offers five versions for different printing needs, resulting in ten files in total.

Versions Included:

-Ready Print - Print-in-place version for easy, one-piece printing.
-Semi-Burst - Designed for smaller print volumes, only a portion of the model to minimize size.
-Sword Burst - Model with the sword extended.
-Sword Only - Just the sword part, for those who want a standalone piece.
-Full Burst - Complete model with all parts separated, for anyone who prefers more control over the printing process.

Dimensions:

-Full sword (retracted): 7.9cm x 10.1cm x 25.0cm
-Full sword (extended): 7.9cm x 10.1cm x 55.6cm
-Semi-Burst: 7.9cm x 10.1cm x 19.0cm

Refer to the image above for visuals of each version.

The Ready Print model is intended for those who want a single, integrated print, while the Semi-Burst model is ideal for printers with smaller build volumes. The Full Burst version offers all parts separated for additional flexibility if you're cautious about print-in-place reliability.

Happy printing, and enjoy your festive Retractable Sword Snowman!

Print in Place setting:

Layer Height: 0.2mm (0.1mm for finer detail).
Infill: 10-15% (100% for the drain cover if stability is needed).
Walls: 3-4 walls for strength.
s: Needed
Brim: Recommended for bed adhesion.
Print Speed: 40-50mm/s; 30mm/s for first layers.
Retraction: 1-2mm distance, 20-25mm/s speed.
Cooling: Fan at 100% after first layers.
Material: PLA recommended; PETG or ABS optional.
Bed Temperature: PLA at 50-60°C; adjust for other materials.
Ensure your printer is calibrated for tolerance to avoid fused parts.

Semi-Burst Model

Layer Height: 0.2mm (0.1mm for finer detail).
Infill: 10-15%.
Walls: 3-4 walls.
s: Required.
Brim: Recommended for better adhesion.
Print Speed: 40-50mm/s.
Material: PLA; PETG or ABS optional.
Bed Temp: PLA at 50-60°C.

Sword Burst Model

Layer Height: 0.2mm.
Infill: 10-15%.
Walls: 3 walls.
s: Required.
Brim: Optional but helps with stability.
Print Speed: 40mm/s.
Material: PLA recommended.
Bed Temp: PLA at 50-60°C.

Sword Only Model

Layer Height: 0.1-0.2mm.
Infill: 15%.
Walls: 3 walls.
s: Required.
Brim: Optional.
Print Speed: 40mm/s.
Material: PLA, PETG.
Bed Temp: PLA at 50-60°C.

Full Burst Model

Layer Height: 0.2mm.
Infill: 10-15%.
Walls: 4 walls.
s: Required.
Brim: Recommended for bed adhesion.
Print Speed: 40-50mm/s.
Material: PLA preferred; PETG/ABS optional.
Bed Temp: PLA at 50-60°C.