Sentinel Prime's Sword From Transformers One

This is a highly detailed 3D model of Sentinel Prime's iconic sword from Transformers One, specifically designed for easy 3D printing. The model comes in two versions: a full-length sword (126.9 cm x 15.1 cm x 2.9 cm) and a segmented version split into smaller parts for a print bed size of 200mm x 200mm x 200mm. No additional editing or cutting is required, as each part has been pre-sliced to ensure seamless assembly. The design also includes sturdy connectors, enhancing durability when assembled. Intricate patterns and geometric lines add authenticity and accuracy, making it a perfect collectible piece for Transformers fans and cosplay enthusiasts.

Material: PLA or PETG for durability.

Layer Height: 0.2 mm for good detail and a balance of print time and quality.

Infill: 15-20% for blade parts (to reduce weight) and 30-40% for handle parts and connectors(for strength).

s: Only if needed for overhanging parts, primarily on the handle sections.

Bed Adhesion: Use a brim or raft to prevent warping, especially for longer parts.

Print Orientation: Lay each part flat on the print bed for stability and minimize needs.

Assembly: Use superglue or epoxy for strong ts; sand down edges if needed for a snug fit.