Skip to content

UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE

HDR50-HOLSTER-RAIL-CONNECTOR-VERS-3.1.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
HDR50-HOLSTER-RAIL-CONNECTOR-VERS-3.2.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191032_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191111_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191211_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
HOLSTER-EXT-AND-SHORT-VERSIONS.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
HOLSTER-HDR50-BASIC-OUT-OF-THE-BOX-rail-connector-vers-2.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
HDR50-HOLSTER-RAIL-CONNECTOR-VERS-3.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191651_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191634_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240821_191607_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
BELT-HOLSTER-HDR50-STEEL-BARRLE-VERS-HD24-LOWER-GRAVITY-CENTER-AND-LOCK-PIN-SECT.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
BELT-HOLSTER-HDR50-STEEL-BARRLE-VERS-HD24-LOWER-GRAVITY-CENTER-AND-LOCK-PIN-SECT-DET.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240819_174420_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE
20240819_174500_resized.jpg UNIVERSAL HOLSTER - HDR50 - OUT OF THE BOX, STEEL BARREL AND BASIC EXTENSION VERSIONS - FOR BELT OR WALL/UNDER TABLE

πŸ”« 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • HDR50 BASIC VERSION OUT OF BOX - HOLSTER ADDAPTOR.zip
    • ELASTIC WASHER.stl
    • HDR50 BASIC HOLSTER ADDAPTOR WITH LOCK HOLE.stl
    • HDR50 BASIC HOLSTER EXTENDED VERSION 35MM BELT SLOT.stl
    • HDR50 BASIC HOLSTER EXTENDED VERSION 40MM BELT SLOT.stl
    • HDR50 BASIC HOLSTER EXTENDED VERSION 45MM BELT SLOT.stl
    • HDR50 BASIC HOLSTER PICATINY RAIL.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 1 VERS 1.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 1 VERS 2.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 2 VERS 1 REQUIRE .stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 2 VERS 1.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 2 VERS 2 REQUIRE .stl
    • HDR50 BASIC HOLSTER SHORT VERSION 35MM BELT SLOT.stl
    • HDR50 BASIC HOLSTER SHORT VERSION 40MM BELT SLOT.stl
    • HDR50 BASIC HOLSTER SHORT VERSION 45MM BELT SLOT.stl
    • HOLSTER ADDAPTOR - KEY.stl
    • HOLSTER ADDAPTOR - LOCK PIN 1.0MM.stl
    • HOLSTER ADDAPTOR - LOCK PIN 1.56MM.stl
    • HOLSTER ADDAPTOR - PLUG REDUCED.stl
    • HOLSTER ADDAPTOR - PLUG.stl
    • HOLSTER WALL OR UNDER TABLE - HDR50 BASIC VERS - 0.30 GAP - 3.20MM HOLES.stl
    • HOLSTER WALL OR UNDER TABLE LARGE - BASIC VERS - 0.30 GAP - 3.20MM HOLES.stl
    • HOLSTER WALL OR UNDER TABLE MEDIUM - BASIC VERS - 0.30 GAP - 3.20MM HOLES.stl
  • HDR50 HOLSTER RAIL CONNECTOR VERS 3.zip
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 1 VERS 3.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 2 VERS 3.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 3 VERS 3.stl
    • HDR50 BASIC HOLSTER RAIL CONNECTOR SECT 4 VERS 3.stl

Learn more about the formats
Publication date 2024-08-20 at 21:42
Design number 2223836
COSTATECHNICDESIGN

COSTATECHNICDESIGN

Issue with this design? Report a problem.

3D printer file info

3D model description

UNIVERSAL HOLSTER - HDR50 - BASIC VERSION - OUT OF THE BOX, STEEL BARREL VERSION, BASIC EXTENDED VERSION - FOR BELT OR WALL/UNDER TABLE

THE UNIVERSAL HOLSTER WILL FITT ON ALL OUR DESIGNS FOR HDR50, AND PROBABLY ON ANY MARKER WHAT IS EQUIPED WITH A PICANTINNY TOP RAIL.

ADDITIONAL RIES INSTALED ON YOUR MARKER WILL MAKE DIFICULT, IF NOT IMPOSIBLE, TO FIND A HOLSTER THAT WILL FIT!

ON MARKET ARE SOME VERSIONS WHAT WILL ACOMODATE THE MARKER AND ONE RY, HOWEVER, IN GENERAL THOSE ARE DESIGN FOR A SPECIFIC MANUFACTURER... AND A SPECIFIC DIMENSION... AND... ARE NOT CHEAP!

THE RAIL/HOLSTER I DESIGN, WILL ALOW YOU TO SAFELY HOLD YOUR MARKER IN A EASY TO REACH AND EASY TO DRAW POSITION, KEEPING OPEN THE POSIBILITY TO INSTALL TO IT... ADDITIONAL RIES!

SAME COMPONENTS CAN BE USED FOR RIGHT OR LEFT HAND DROW!

LOCK PIN COMES IN TWO VERSION - FOR AN EASY OR HARD REMOVAL/DRAWING OF THE MARKER!
A RUBBER WASHER (2MM THICKNESS) CAN BE ALLSO INSTALED - USING THE REDUCED NUT - TO EASE THE RELEASE FUNCTION!

POSITION OF MARKER IN RAPORT WITH THE ARM ...HAND AND ELBOW ... ALOW AN EASY CONTROL AND USE/DRAWING!

IT USE 3 PCS M4 X 40MM AND 2PCS M4 X 12-14MM - SOCKET HEAD AND LOCK NUT

WALL/UNDER TABLE HOLSTER COMES IN 3 VERSIONS, ALOWING TO STORE OR TO STORE AND USE FROM SAME POSITION, WITHOUT REMOVAL/DRAWIND FROM THE HOLSTER.

IT USE 3.0 - 3.2MM COUNTERS SINK WOOD SCREWS - LENGHT IS DICTATED BY THE USED HOLSTER CONNECTOR VERSION.

THE ONE PRINTING THE HOLSTER AND ITS RRIES IS ENTIRELY RESPONSIBLE FOR ANY INCIDENT OR ACCIDENT RESULTING FROM USING THIS DESIGN.

WE DO NOT ASSUME ANY RESPONSIBILITY!

USE YOUR JUDGMENT!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT ! BY COSTA!

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your license! Do not alter or modify for resale, sharing with others, making it public, or redistributing in any form, digital or physical, including digital content such as images, DXF, STL files, etc. Do not sell, share, make it public, or redistribute it in its current form. Do not sell the final product! You will need a Commercial License to sell this final product! For a commercial license, please us!

3D printing settings

200X200X200 MINIMUM PRINT VOLUME REQUIRED.

PARTS ARE PRINTED SUCCESSFULLY WITH ABS USING BAMBU X1C PRINTER WITH BASIC SETTINGS.

3LINES WALL AND 25% INFILL.

INCREASE OR DECREASE THE STRENGTH AS YOU MAY SEE FIT.

Categories

Construction toys

Tags

Advertising

Other designs you may like

All

Check out similar designs

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.