Skip to content

UMAREX HDR .50 - LASER DOT CONNECTOR

UMAREX-HDR-50-LASER-POINTER--2.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240210_222408_resized.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
HDR-50-LASER-CONNECTOR-VERS-2.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
UMAREX-HDR-50-LASER-POINTER--2.2.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
UMAREX-HDR-50-LASER-POINTER-.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240104_194636_resized.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240104_195527_resized_1.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240104_123752_resized.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240104_130441.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
20240104_123921_resized.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
CO2-key.jpg UMAREX HDR .50 - LASER DOT CONNECTOR
UMAREX .50 PRESURE PLATE.stl UMAREX HDR .50 - LASER DOT CONNECTOR
UMAREX LASER POINTER 3.stl UMAREX HDR .50 - LASER DOT CONNECTOR

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
5 files (RAR, STL, and ZIP) Close
  • CO2 PIERCING UNIT - RELEASE KEY.zip
    • KEY HOLE T1.stl
  • FREE UPGRADE 12 FEB 2024.rar
  • UMAREX .50 PRESURE PLATE.stl
  • UMAREX LASER POINTER 3.stl
  • Umarex HDR 50 Laser Pointer Connector.rar

Learn more about the formats
Last update 2024-06-24 at 20:27
Publication date 2024-01-04 at 11:25
Design number 1687224
COSTATECHNICDESIGN

COSTATECHNICDESIGN

Issue with this design? Report a problem.

3D printer file info

3D model description

UMAREX HDR .50 - LASER DOT CONNECTOR

FOR MORE DESIGNS FROM OUR COLECTION: https://cults3d.sitegames.net/en/design-collections/COSTATECHNICDESIGN/airsoft-paintball

WARNING! IF YOU ARE NOT OVER 18 YEARS OLD, PLEASE REFRAIN FROM ING THIS MODEL!

WARNING! ALWAYS BE CAREFUL WHEN USING LASER EMITTER SYSTEMS, THEY CAN DAMAGE IRREVERSIBLE YOUR EYES OR BURN YOUR SKIN! ALWAYS USE EYES PROTECTION! BE RESPONSIBLE!

FREE UPGRADE - 24 JUNE 2024 - CO2 HDR50/HDR68 MARKER CO2 PIERCING UNIT - RELEASE KEY

IF YOU ARE LOOKING FOR THE FULL PACKAGE OF THE CO2 SAFETY TUBE HOLDER - PLEASE HAVE A LOOK:

https://cults3d.sitegames.net/en/3d-model/game/co2-safety-storage-tube-with-co2-hdr50-marker-piercing-release-key

WARNING!

I STRONGLY RECOMMEND NOT USING THE RELEASING KEY WHEN TIGHTENING UP THE CO2 PIERCING NUT!

USE ONLY YOUR FINGERTIPS, AND EVEN THEN, DO NOT FORCE IT! THE AIR SEAL IS MADE BY AN ORING. THIS PROCEDURE DO NOT REQUIRE A LOT OF FORCE!

THE KEY SHOULD BE USED ONLY TO OPEN THE CO2 CHAMBER!

EXCESSIVE FORCE WILL WEAKEN THE THREADS AND THE STRUCTURE OF THE CO2 CHAMBER!

IF YOU ARE ENJOYING ALL THOSE FREE UPGRADES... THE ONLY THING I ASK IN RETURN ... IS FOR YOU TO COMMENT... WITH GOOD AND BAD ... NAKED TRUTH ... AND POST SOME PICTURES OF YOUR PRINTS ... HAPPY PRINTING AND BE SAFE!

IMPORTANT!!! FREE UPGRADE 12 FEB 2024 ... THE POSITION OF THE HOLE CONNECTOR WAS CHANGED... IN ORDER TO OBTAIN A BETTER ALIGNMENT WITH THE BARREL! THIS UPGRADE SUR THE 10 FEB UPGRADE, WHAT WAS ALSO REMOVED FROM THE SITE!

IMPORTANT FREE UPGRADE - 10 FEB 2024
Due to the fact that I reduce the tolerance between Pellet and Barrel Walls ... I design a tool to check for the Suppressor Connector and the Barrel alignment.
When the bolts are tight with moderation... and balanced (one bolt is tight little... then go to the other... and repeat the process) everything is ok, however... if you are over tightening ... the Suppressor Connector go slightly out of alignment.
In order to avoid this... a new way to secure the Suppressor Connector to the gun was created!
Keep in mind that the Laser Unit need to be install and set to final position before you tighten up the bolts!
Enjoy!

It used 3 Socket Head Bolts M4 30mm, with lock nuts.

In my case... tools used for test are... 13.15 Centering Adaptor and 12.95 Centering Tool.
Print and test what is the best fit for your gun/printer!

The Silencer mounted to the Laser Dot Connector is just for presentation and is not included. For Barrels and Suppressors what can pair with this design ... please see link below!

https://cults3d.sitegames.net/en/3d-model/game/umarex-50-suppressor-paintball-marker

ARE YOU IN NEED OF A GREAT 3D PRINTABLE DESIGN FOR UMAREX .50 PELLETS... HAVE A LOOK!
https://cults3d.sitegames.net/en/3d-model/game/umarex-hdr-50-pellets-with-steel-bb-6mm-core

The system connects to the bottom rail and is secured with two M4 10MM headless bolts and lock nuts. (A lock nut is strongly recommended).

The Lock Plate what goes between the Bolt and Gun Rail is a consumable part. Replace it when you consider it necessary! I strongly recommend to print it with 100% infill, so it will sustain the pressure of the Bolt. Due to design of the Bottom Rail, the Lock Plate tend to lock the Connector on position; Tap the gun gently so the Connector can be extracted.

Vers 1 - To activate the Laser Dot, after inserting the Pointer into position and ensuring the ON/OFF button enters the 'Activation Slot,' you need to PUSH the pointer until the button is activated. To stop, simply pull out the Pointer until the button is no longer activated.
Note: The 10 Feb 2024 Upgrade disable this feature... the Laser Unit will be "lock on position" when the connector is secured to the gun!

Vers 2 - Additional is possible now to activate the Laser Dot using your finger. Can be used also by those Left Handed!

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your license! Do not alter or modify for resale, sharing with others, making it public, or redistributing in any form, digital or physical, including digital content such as images, DXF, STL files, etc. Do not sell, share, make it public, or redistribute it in its current form. Do not sell the final product! You will need a Commercial License to sell this final product! For a commercial license, please us!

Thank you for your interest in our product!

THE ONE PRINTING THE LASER DOT CONNECTOR IS ENTIRELY RESPONSIBLE FOR ANY INCIDENT OR ACCIDENT RESULTING FROM USING THIS DESIGN.

WE DO NOT ASSUME ANY RESPONSIBILITY!

USE YOUR JUDGMENT!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT ! BY COSTA!

I DO NOT ENDORSE ANY ESTORE PLATFORMS! USED AS A REFERENCE ONLY!

https://www.emag.ro/laser-pointer-verde-puternic-cu-acumulator-puternic-trust24-108/pd/D3V8N0BBM/

3D printing settings

200X200X200 MINIMUM PRINT VOLUME REQUIRED.

PARTS ARE PRINTED SUCCESSFULLY WITH ABS USING BAMBU X1C PRINTER WITH BASIC SETTINGS

INCREASE OR DECREASE THE STRENGTH AS YOU MAY SEE FIT.

Categories

Airsoft

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.