Skip to content

3D PRINTED RC CAR HMMWV (Humvee Hummer) BODY 2 in 1 set BY AN3DRC

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • [AN3DRC] 3D printed HMMWV body v1.0.zip
    • Alternative parts versions/Basic quarters with flat bottom side/H Basic quarter FL(with flat bottom side).stl
    • Alternative parts versions/Basic quarters with flat bottom side/H Basic quarter FR(with flat bottom side).stl
    • Alternative parts versions/Basic quarters with flat bottom side/H Basic quarter RL(with flat bottom side).stl
    • Alternative parts versions/Basic quarters with flat bottom side/H Basic quarter RR(with flat bottom side).stl
    • Alternative parts versions/For 180x180 printers/H Roof left(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Roof left(no turret ver)(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Roof right(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Roof right(no turret ver)(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Tunnel pt1 front(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Tunnel pt1 rear(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Turret ring link leftt(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Turret ring link right(for 180x180).stl
    • Alternative parts versions/For 180x180 printers/H Turret ring main part(for 180x180).stl
    • Alternative parts versions/H tailgate(without text).stl
    • Alternative parts versions/No turret roof/H Roof left(no turret ver)(without inserted ).stl
    • Alternative parts versions/No turret roof/H Roof left(no turret ver).stl
    • Alternative parts versions/No turret roof/H Roof right(no turret ver)(without inserted ).stl
    • Alternative parts versions/No turret roof/H Roof right(no turret ver).stl
    • Alternative parts versions/No turret roof/H Upper cross connection half(for no turret version).stl
    • Alternative parts versions/Pickup parts/H Pickup rear wall bottom.stl
    • Alternative parts versions/Pickup parts/H Pickup rear wall left.stl
    • Basic parts/H Basic quarter FL.stl
    • Basic parts/H Basic quarter FR.stl
    • Basic parts/H Basic quarter RL.stl
    • Basic parts/H Basic quarter RR.stl
    • Basic parts/H rear stand left.stl
    • Basic parts/H Receiver cap.stl
    • Basic parts/H side stand center left.stl
    • Basic parts/H Transverse amplifier.stl
    • Basic parts/H Tunnel cap.stl
    • Basic parts/H Tunnel pt 2.stl
    • Basic parts/H Tunnel pt1.stl
    • Basic parts/H upper cross connection rear.stl
    • Basic parts/H upper longitudinal connector left.stl
    • Basic parts/H1 Basic quarter mounting hook left.stl
    • Basic parts/H1 Body floor bracket left.stl
    • Chassis parts/H1 Fording Exhaust Pipe bottom.stl
    • Chassis parts/H1 Fording exhaust pipe top.stl
    • Chassis parts/H1 Mil brush guard bracket left.stl
    • Chassis parts/H1 Mil Brush guard left.stl
    • Chassis parts/H1 Mil front bumper(with towing rings holes).stl
    • Chassis parts/H1 Mil front bumper.stl
    • Chassis parts/Mil style rims/H Rim mil cap.stl
    • Chassis parts/Mil style rims/H Rim mil inner.stl
    • Chassis parts/Mil style rims/H Rim mil outer 12bolt.stl
    • Chassis parts/Mil style rims/H1 Rim spacer circle.stl
    • Chassis parts/Rear bumper/H rear bumper center.stl
    • Chassis parts/Rear bumper/H Rear bumper hook cap.stl
    • Chassis parts/Rear bumper/H Rear bumper inner diagonal strut.stl
    • Chassis parts/Rear bumper/H Rear bumper left.stl
    • Chassis parts/Rear bumper/H Rear bumper right.stl
    • Chassis parts/Rear bumper/H Rear bumper towing hook base(decorative).stl
    • Chassis parts/Rear bumper/H Rear bumper towing yoke base.stl
    • Chassis parts/Rear bumper/H towing yoke.stl
    • Chassis parts/Rear bumper/H1 rear bumper diagonal strut.stl
    • Decorative parts/H Antenna base.stl
    • Decorative parts/H Antenna holder for fender.stl
    • Decorative parts/H Radio tray bracket.stl
    • Decorative parts/H Radio tray stand.stl
    • Decorative parts/H Radio tray1.stl
    • Decorative parts/H Radio tray2.stl
    • Decorative parts/H Radio1.stl
    • Decorative parts/H Radio2.stl
    • Decorative parts/H Snorkel head.stl
    • Decorative parts/H snorkel tube.stl
    • Decorative parts/H1 Air filter barrel pipe.stl
    • Decorative parts/H1 air filter barrel.stl
    • Decorative parts/H1 Pedals unit.stl
    • Decorative parts/H1 Wiper ball pin.stl
    • Decorative parts/H1 Wiper base.stl
    • Decorative parts/H1 Wiper.stl
    • Doors/H Door bracket pt1 left.stl
    • Doors/H door bracket pt2 left.stl
    • Doors/H Door FL.stl
    • Doors/H Door glass frame left.stl
    • Doors/H door handle front left.stl
    • Doors/H door handle rear left.stl
    • Doors/H Door locker left.stl
    • Doors/H Door RL.stl
    • Front window frame/H Front window central stand.stl
    • Front window frame/H Front window frame left.stl
    • Front window frame/H1 Front window frame right.stl
    • Hood/H Hood blackout lamp.stl
    • Hood/H Hood front grille.stl
    • Hood/H Hood headlight lamp.stl
    • Hood/H Hood left.stl
    • Hood/H Hood locker basic part left.stl
    • Hood/H Hood right.stl
    • Hood/H Hood turn signal body.stl
    • Hood/H1 hood locker left.stl
    • Hood/H1 hood top griil.stl
    • Interrior/H Drive dashboard switch.stl
    • Interrior/H Driver dashboard puller.stl
    • Interrior/H Driver dashboard turn signal switching handle.stl
    • Interrior/H Driver dashboard.stl
    • Interrior/H Gunner platform.stl
    • Interrior/H enger dashboard.stl
    • Interrior/H steering wheel.stl
    • Mirrors/H Mirror bracket pt1.stl
    • Mirrors/H Mirror bracket pt2 left.stl
    • Mirrors/H Mirror bracket pt3 left.stl
    • Mirrors/H Mirror.stl
    • Rear side/H Battery box cap.stl
    • Rear side/H Battery box.stl
    • Rear side/H cargo area bath.stl
    • Rear side/H cargo area floor end.stl
    • Rear side/H cargo space floor.stl
    • Rear side/H Fender RL.stl
    • Rear side/H Fender RR.stl
    • Rear side/H Tailgate.stl
    • Rear side/H1 tailgate bracket pt1.stl
    • Rear side/H1 tailgate bracket pt2.stl
    • Roof/H Roof left(without inserted ).stl
    • Roof/H Roof left.stl
    • Roof/H Roof right(without inserted ).stl
    • Roof/H Roof Right.stl
    • Seats/H Seat FL basic stand.stl
    • Seats/H Seat FL.stl
    • Seats/H Seat FR bottom cap.stl
    • Seats/H Seat FR.stl
    • Seats/H Seat RL.stl
    • Seats/H Seat RR.stl
    • Slantback parts/H Slantback door pusher cylinder.stl
    • Slantback parts/H Slantback door pushing cylinder end.stl
    • Slantback parts/H Slantback door.stl
    • Slantback parts/H Slantback left.stl
    • Slantback parts/H Slantback right.stl
    • Slantback parts/H Slantback roof center.stl
    • Turret installing ring/H Turret installing ring.stl
    • Turret installing ring/H Turret ring tube left.stl
    • Turret v1/H Turert v1 machinegun Y-stand.stl
    • Turret v1/H Turret v1 base.stl
    • Turret v1/H Turret v1 Bullet box holder.stl
    • Turret v1/H turret v1 Bullets box.stl
    • Turret v1/H Turret v1 cap fixator pt1.stl
    • Turret v1/H Turret v1 cap fixator pt2.stl
    • Turret v1/H Turret v1 cap fixator pt3.stl
    • Turret v1/H Turret v1 cap pt1.stl
    • Turret v1/H Turret v1 cap pt2.stl
    • Turret v1/H Turret v1 fix handle.stl
    • Turret v1/H Turret v1 fix pusher.stl
    • Turret v1/H Turret v1 fixation pin.stl
    • Turret v1/H Turret v1 fixation ring.stl
    • Turret v1/H Turret v1 gun A-stand.stl
    • Turret v1/H Turret v1 machine gun main part.stl
    • Turret v1/H Turret v1 Machinegun barrel.stl
    • Turret v1/H Turret v1 machinegun reload handle.stl
    • Turret v1/H Turret v1 Machinegun ing link.stl
    • Turret v1/H Turret v1 Machinegun ing platform.stl
    • Turret v1/H Turret v1 Machinegun V-.stl
  • [AN3DRC] HMMWV Light lamp glasses.zip
    • H Head Turn signal glass(print 2 orange).stl
    • H Hood side turn signal marker glass(print 2 orange).stl
    • H Light Reflector(print 2 orange and 4 red).stl
    • H Sider turn signal marker glass rear(print 2 red).stl
    • H Tail light lamp glass(print 2 red).stl
    • H1 Headlight glass.stl

Learn more about the formats
Last update 2024-07-01 at 21:49
Publication date 2024-05-07 at 12:29
Design number 1976146
AN3DRC_H1

AN3DRC_H1

Issue with this design? Report a problem.

3D printer file info

3D model description

I present to your attention the best 3D printed rc car HMMWV (Humvee Hummer) in the world !!!

This is a 2 in 1 set. You can build a Pickup or Slantback body type. The archive also contains details for building a version without a turret. This means that with this set you can build 4 different types of Humvees: Pickup without turret, Pickup with turret, Slantback without turret and Slantback with turret.

Video overview and test run: https://www.youtube.com/watch?v=QPPUNQUqzXE

Attention only the body is published here! In order to assemble the complete model (as in the photo), you also need to the Chassis and Gearbox

Instructions with all the necessary information, a list of parts to buy and a list of used screws and nuts are published at the link: link

Chassis: link

Gearbox: link

Wagon body: link

Slantback body: link

Pickup body: link

2 door Pickup body: link

The assembled model has the following technical characteristics:
- This model is designed on a scale of 1 / 8.5.
- Length approximately 550mm.
- Width approximately 260mm (without mirrors)
- Wheelbase - 388mm.
- Track - 220mm.
- 4x4
- All mechanisms are working! Doors, hood, tailgate can all be opened and closed.

Initially, the Humvee body was created for printing on printers with a 200x200x200mm print area. I printed everything on my Ender 3 Pro. But many parts are smaller and can be printed on printers with a print area of 180x180x180mm. For those parts that initially did not fit on such small printers, alternative versions were created and now you can print this chassis on your printer with a print area of 180x180x180, for example, on the Prusa mini!

You can see more photos on my Instagram: link

I have a Facebook group, if you have any questions you can ask them there link

Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer!

UPD 8 Apr 2021-------------------------------------------------------------
Added rear wall parts for building a Pickup body.

Upd 11 Apr 2021----------------------------------------------
Added alternative versions of some parts so that the Humvee body could be printed on a printer with a 180x180mm printing bed.

3D printing settings

PLA.
Walls 3-7
Filling 15-30%
Layer height 0.12-0.2
Nozzle 0.3 - 0.4
Different for different parts.

Categories

Mechanical toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.