Skip to content

3D Printed Hummer H1 Chassis by AN3DRC

preview_chassis.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis1.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis2.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis3.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis4.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis5.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis6.jpg 3D Printed Hummer H1 Chassis by AN3DRC
chassis7.jpg 3D Printed Hummer H1 Chassis by AN3DRC
IMG_210611_132412.jpg 3D Printed Hummer H1 Chassis by AN3DRC
121554.jpg 3D Printed Hummer H1 Chassis by AN3DRC
6.jpg 3D Printed Hummer H1 Chassis by AN3DRC
005459_1.jpg 3D Printed Hummer H1 Chassis by AN3DRC
slantbacki1.jpg 3D Printed Hummer H1 Chassis by AN3DRC
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (3 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • [AN3DRC] 3D printed Hummer H1 Chassis v1.1.zip
    • Bull bar/H1 Bull bar left part.stl
    • Bull bar/H1 Bull bar mainpart.stl
    • Bull bar/H1 Bull bar mounting bracket left.stl
    • Decorative parts/H1 AUX fuel tank.stl
    • Decorative parts/H1 ESC case(long shocks, no fans).stl
    • Decorative parts/H1 ESC case(long shocks, with fans).stl
    • Decorative parts/H1 Front skid plate.stl
    • Decorative parts/H1 Fuel tank main.stl
    • Decorative parts/H1 Radiator(no fans).stl
    • Decorative parts/H1 Radiator(use with fans).stl
    • Decorative parts/H1 Rear skid plate.stl
    • Differentials/H1 Differential case front bottom.stl
    • Differentials/H1 Differential case front top.stl
    • Differentials/H1 Differential case rear bottom.stl
    • Differentials/H1 Differential case rear top.stl
    • Differentials/H1 Differential shaf reart.stl
    • Differentials/H1 Differential shaft front.stl
    • Differentials/H1 Drive bevel gear.stl
    • Differentials/H1 Driven bevel gear back.stl
    • Differentials/H1 Driven bevel gear front.stl
    • For 180x180mm printers/H1 Frame center cross connector(for 180x180).stl
    • For 180x180mm printers/H1 Frame center left(for 180x180).stl
    • For 180x180mm printers/H1 Frame center right(for 180x180).stl
    • Frame/H1 Frame center.stl
    • Frame/H1 Frame leaf front left.stl
    • Frame/H1 Frame leaf rear left.stl
    • Frame/H1 Frame mushroom.stl
    • Frame/H1 Front cross member.stl
    • Frame/H1 Hood mounting bracket left.stl
    • Frame/H1 Rear bumper center.stl
    • Frame/H1 Rear bumper diagonal strut.stl
    • Frame/H1 Rear bumper left.stl
    • Frame/H1 Rear bumper right.stl
    • helpers/H1 Fuel tank drilling guide 2.stl
    • helpers/H1 Fueltank drilling guide 1.stl
    • Push rod rear suspension(for 2 door pickup)/H1 lower suspension arm rear(push rod).stl
    • Push rod rear suspension(for 2 door pickup)/H1 rear suspension hub left(push rod).stl
    • Push rod rear suspension(for 2 door pickup)/H1 Shock absorber bracket left(push rod).stl
    • Push rod rear suspension(for 2 door pickup)/H1 Suspension rocker left.stl
    • Push rod rear suspension(for 2 door pickup)/H1 Suspension top arm holder rear(push rod).stl
    • Rims/H1 Rim A cap.stl
    • Rims/H1 Rim A inner.stl
    • Rims/H1 Rim A outer.stl
    • Rims/H1 Rim B inner.stl
    • Rims/H1 Rim B outer.stl
    • Rims/H1 Rim C cap.stl
    • Rims/H1 Rim C inner.stl
    • Rims/H1 Rim C outer.stl
    • Rims/H1 Rim spacer circle.stl
    • Suspension(standard)/H1 Front suspension subframe.stl
    • Suspension(standard)/H1 Lower suspension arm front.stl
    • Suspension(standard)/H1 Lower suspension arm rear.stl
    • Suspension(standard)/H1 Rear suspension subframe.stl
    • Suspension(standard)/H1 Rounded Fist left.stl
    • Suspension(standard)/H1 Servo Arm.stl
    • Suspension(standard)/H1 Servo bracket.stl
    • Suspension(standard)/H1 Shock absorber bracket front left long.stl
    • Suspension(standard)/H1 Shock absorber bracket front left short.stl
    • Suspension(standard)/H1 Steering bracket.stl
    • Suspension(standard)/H1 Steering rack.stl
    • Suspension(standard)/H1 Suspension front top arm holder left.stl
    • Suspension(standard)/H1 Suspension hub front left.stl
    • Suspension(standard)/H1 Suspension hub rear left.stl
    • Suspension(standard)/H1 Suspension top arm holder rear.stl
    • Suspension(standard)/H1 Top suspension arm.stl

Learn more about the formats
Publication date 2024-05-07 at 11:00
Design number 1975950
AN3DRC_H1

AN3DRC_H1

Issue with this design? Report a problem.

3D printer file info

3D model description

Hello! My name is Anton.
I designed a 3D printed Hummer H1.
This model is designed on a scale of 1 / 8.5.
Length approximately 550mm.
Width approximately 260mm (without mirrors)
Wheelbase - 388mm.
Track - 220mm.
4x4

Initially, the Chassis was created for printing on printers with a 200x200x200mm print area. I printed everything on my Ender 3 Pro. But many parts are smaller and can be printed on printers with a print area of 180x180x180mm. For those parts that initially did not fit on such small printers, alternative versions were created and now you can print this chassis on your printer with a print area of 180x180x180, for example, on the Prusa mini!

This is a fully printed model (excluding some details).

Here you can only the chassis. It is universal for all bodies. You also need to a gearbox and one of the bodies.

You can find all the necessary instructions for assembly at this link: link

Instructions with printing recommendations can be found at this link: link

Gearbox: link

Wagon body: link

Slantback body: link

Pickup body: link

2 door Pickup body: link

Millitary Humvee body: link

You can see more photos on my Instagram: link

I have a Facebook group, if you have any questions you can ask them there link

Test drive of a fully assembled model: https://www.youtube.com/watch?v=z_DQVSOeh70

Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer!

Upd 18 Oct 2020-------------------------------------------
Fixed spacer ring in the wheel rim for more secure rubber fixation. Additional mounting holes have been added to the center and rear of the frame parts for future updates. But if you have already printed these details, then it's okay. The holes can be made with a drill.

Upd 20 Oct 2020-------------------------------------------
Added a set of rear pushrod suspension. Recommended for use with a 2-door pickup body. Long (98mm) and soft shock absorbers cannot be used with this body type. This suspension is lighter than the short (68mm) shocks in the standard configuration.

Upd 7 Dec 2020-----------------------------------------------
Added grease holes to differential cases as recommended by one customer. This will make it easier to service the differentials. You can add grease with a syringe without disassembling the differential. The holes are not through, if you want to use them you need to drill them all the way with a 2.5mm drill bit. To prevent the grease from leaking out, the holes must be closed with the M3x3-5 screw.

Upd 31 Jan 2021---------------------------------------------
Big update for chassis and bodies!
Whats new come with this update you can see in this presentation https://docs.google.com/presentation/d/1TxHhYKVKwII4jKq7qA5wcRCS4tXbHYeXIsXKtNv49V0

Upd 11 Apr 2021----------------------------------------------
Added alternative versions of some parts so that the Chassis could be printed on a printer with a 180x180mm printing bed.

3D printing settings

For the frame parts, I used a PLA.
Walls 5-7
Filling 25-35%
For the suspension elements I used PETG
Walls 7-10
Filling 35-50%
Layer height 0.2-0.3
For gears 0.1 - 0.16

Categories

Mechanical toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.