Skip to content

UNLIMIT3D - ESP32-Breadboard-Mk2

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
11 files (STL) Close
  • Antideslizante-A-mk2.stl
  • Antideslizante-B-mk2.stl
  • Antideslizante-C-mk2.stl
  • Antideslizante-D-mk2.stl
  • ESP32-Breadboard-Tapa-mk2.stl
  • ESP32-Breadboard-mk2.stl
  • Letra-E.stl
  • Letra-P.stl
  • Letra-S.stl
  • Numero-2.stl
  • Numero-3.stl

Learn more about the formats
Publication date 2023-11-08 at 07:59
Design number 1565007
UNLIMIT3D

UNLIMIT3D

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Hello world!

I'm Ivan, creator of UNLIMIT3D.

Surely, if you are electronic you will have realized that until now there was no "protoboard" capable of containing a development board based on the ESP 32 microcontroller, allowing the connection of its pins on both sides. This happens with all commercial breadboards, being mandatory to have to use two breadboards to make a simple circuit with that microcontroller (which can be cumbersome and confusing). This was happening until now, as I have taken the boldness to design a specific breadboard capable of ing an ESP 32 development board, as well as ing the other models of "Arduino" type development boards, such as: Nano, Micro Pro, Pro Mini, ESP 8266 and even Raspberry Pi Pico.

The ESP32-Breadboard-Mk2 model is used in the same way as any commercial breadboard and was designed respecting commercial standards. The first part of it allows to place a power supply to supply power to the voltage buses and at the same time to power the ESP 32 independently with respect to the rest of the circuit (second half of the board). To house the ESP 32 it has 220 connection points divided into 110 points on each side of the circuit (22 x 5 point matrix on each side). The first part of the ESP32-Breadboard-Mk2 is internally separated from the second half as far as the power buses are concerned, i.e. to communicate these power buses from the first half of the board to the second half it is necessary to bridge them.

The second half of the ESP32-Breadboard-Mk2 consists of independent power buses from the first half and sufficient connection points to them. However, this second half has 330 connection points (divided into two 33 x 5-point arrays on each side) for placing components, transistors, displays, ICs, potentiometers, etc.

Once you print ESP32-Breadboard-Mk2 you must remove the metal brackets from any commercial breadboard and place them inside the holes of the printed model. In the channels corresponding to the power buses for the ESP32 section you must place individual brackets and solder them. For the second half of the breadboard you place the brackets of the power buses of the commercial breadboard. After putting all the brackets in place, you must glue the back cover using glue.

Includes optional anti-skids to place under the breadboards you print.

It is very easy to print in PLA.

3D printing settings

-To print ESP32-Breadboard-Mk2 and its respective lid

Material: PLA

Layer height: 0.2mm

Number of walls: 3

Nozzle diameter: 0.4mm

Filling density: 20%

s: NO.

-Clarification

Horizontal Expansion: [-0.15; -0.1] Only on the letters and numbers forming the word "ESP 32", optional to print in some different color and embed them within the embossing of the ESP32-Breadboard-Mk2.

To print the Anti-Skid

Material: FLEX/TPU

Layer height: 0.2mm

Number of walls: 3

Nozzle diameter: 0.4mm

Categories

Robots

Tags

Advertising

Page translated by automatic translation. See the original version.

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.