Meshtastic Fixed Node Case 100% Waterproof (Heltec/Faketec/RAK...)

DESCRIPTION
This product is a completely watertight and rain-resistant 3D-printed case designed for Lora modules. There is no better waterproof case than this one. I've tested it for over a year, and it's built to last for many more.
(The inner diameter is 27mm)
- Includes different capsules and caps with different numbers of outlets.
- Some holders to fix it to walls or tubes.
- Solar structure to add some solar s, MPPT and 18650s watertight
- Stevenson screen with BME280 sensor to measure and send climate data
- And more things that I'm adding over time. Buy one time and every update for free!!!

With the included holder parts, you can fix the capsule to any surface. If you are missing any specific mount, you can add a comment, and I can provide it promptly.

Discover seamless assembly with our included PDF manual, guiding you through every step of the project. Enjoy the build!🙂​

PARTS LIST 🧩
(If you need some adapter or update that is not in this list please let me know in comments. Also, all is really apreciated)

/capsules
- closed_normal.stl (Capsule with no antenna connector hole for battery storage or other waterproof stuff)

• extension_tube.stl (Generic extension tube for extra space)
• Type_N_fit_helper (Used to guide the type N connector inside the Type_N_long capsules)
• SMA_normal_logo.stl / SMA_normal_no_logo.stl (Internal 61 mm long for SMA)
• SMA_long_logo.stl / SMA_long_no_logo.stl (Internal 61 mm long for SMA)
• Type_N_normal_logo.stl / Type_N_normal_no_logo.stl (Internal 61 mm long for Type N)
• Type_N_long_logo.stl / Type_N_long_no_logo.stl (Internal 61 mm long for Type N)

/caps (Bottom close of the capsule can have several PG-7 waterproof outlets)

• 1_outlet.stl / 2_outlets.stl / 3_outlets.stl
• no_outlets_female.stl / no_outlets_male.stl

/holders (Mounts for the capsule and components, if you need more say in comments)

/holders/pole

• zip_tie_antenna_pole.stl (Mount for home antennas poles )

• tube_mount_antenna_pole_with_metal.stl (Mount for home antennas poles )

• tube_mount_antenna_pole_without_metal.stl (Mount for home antennas poles )

• tube_25mm_closed.stl / tube_25mm_open.stl

• tube_35mm_closed.stl / tube_35mm_open.stl

/holders/wall

• robust_part1.stl (Part 1 of the heavy duty wall mount for builds with solar pannels, 3x 18650, sensors etc.)

• robust_part2.stl (Part 2 of the heavy duty wall mount for builds with solar pannels, 3x 18650, sensors etc.)

• weak.stl (Old version but works for only the capsule and the internal LiPo battery)

/add-ons 🛠️

/add-ons/5w solar /

• box.stl

• box_cap.stl

• holder.stl

• nut_helper.stl

• structurals.stl

/add-ons/stevenson screen/

• main.stl

• ring.stl

• top.stl

/add-ons/CCTV solar (tested in nivian one)/

• body.stl

• screw_cap.stl

Update 22/02/2025:
Added a sturdy adapter for common CCTV solar s ☀️, ensuring a clean and seamless build.

Update 7/11/2024:
Added 2 heavy duty antenna pole mounts compatible with the metal adapters of the TV antennas. (shown in the first photo)

Update 22/12/24:
Type_N_long_logo.stl and Type_N_long_no_logo.stl are now 5mm longer. Additionally, the solar holder now includes a hole to allow an Allen key to through, making it easier to tighten the capsule. I have also included a Type N internal adapter to make it easier to insert the connector into the long capsule.

Update 5/10/24:
Updated project folder structure and better manual.

Update 4/10/24:
Type-N antennas update!
Added a capsule for female (outside screw threaded) Type-N antenna connector used in Helium like antennas.

Update 1/10/24:
Added a pole mount (for up to 40mm diameter). Compatible with normal 35mm home antenna poles. Uses two thin zip ties or (recommended) one 10mm one. You can find it in the "holders" folder.

Update 5/3/24:
Added a plug without hole to be used with internal battery without external cable connected.

🔥Update 9/3/24:
Introducing a comprehensive update that includes 2-way and 3-way caps, ideal for adding extra sensors or solar s. Also, now featuring a Stevenson Screen for seamlessly incorporating the BMP/BME280 sensor, enabling climatological data collection for Meshtastic. Enhance your project with these latest features!
Also an assembly manual has been added!

Update 10/3/24:
New parts:
- Added an extension tube to accommodate a 18650 battery.
- Longer main capsule to directly accommodate a 18650 battery, which is recommended over the extension tube.
- Some heavy-duty holders, much stronger, in preparation for an solar upgrade!

😎​☀️ Update 12/5/24:
SOLAR AUTONOMY Update!
- Added 5W solar integration with up to 3x 18650
- Added an extra capsule for 18650 battery
- Added electrical diagrams to manual

Feel free to use a few s on the cap and the capsule if desired, although it's not necessary (I opted to use them due to a slight difference in price). However, exercise caution and avoid using s on the threads.

I have used normal PLA +. Using PETG will probably give it a longer useful life but a light color PLA can also last a long time.

Printed on normal Ender 3 Pro with JAYO PLA+. Easy peasy!