Flexi Ancient Cat, Medium Size (Print-in-place)

"In ancient ages, cats had long bodies like dragons. (Of course, this is a lie😽)"

This is an upgraded version of the flexi extra size cat I published on Thingiverse.
https://www.thingiverse.com/thing:6911069

The following details have been added compared to the free version.
・Added details of whiskers and paw pads
・Added two new versions of Cat Eye and Toon Eye
・Added details of crest on body

This set comes with 3 types of medium size(square, wide, straight). Compared to the free version, these sizes are the same as the extra cat for the meduim size.
Each optimized file is available so that even a small printer like the Bambu Lab A1 mini can 3D print without scaling down. If your 3D printer has a bed size of 250mmx250mm or larger, such as Bambu Lab X1C/P1S/A1/H2D, you can make up to four cats at once. (using wide type)

---

This model includes the following digital content,

[Square Type]
- 01: STL - Normal Eye
- 01: STL - Cat Eye
- 01: STL - Toon Eye
- 02: 3mf (Bambu)- Cat Set
- 03: 3mf (Prusa)- Normal Eye
- 03: 3mf (Prusa)- Cat Eye
- 03: 3mf (Prusa)- Toon Eye
[Wide Type]
- 01: STL - Normal Eye
- ...
- ...
- 03: 3mf (Prusa)- Toon Eye
[Straight Type]
- 01: STL - Normal Eye
- ...
- ...
- 03: 3mf (Prusa)- Toon Eye

02 is 3mf files for multi-color that are compatible with Bambu Studio, and 03 is 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files.

Print in Place with no s. No assembly required. Please take pictures of your Flexi and share them with us!

---

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the and conditions below.
https://cults3d.sitegames.net/en/licenses#cults_cu_nd
---2025/02/26---
Authorized Seller badges are now available in three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge. Please show badge or indicate credit when you use the service.
---2025/04/02---
The of Use have been established in accordance with the classification of commercial model licenses. This model falls under the “AC-Model (Anyone Commercial use model)” in the of Use. For details, please refer to the following of Use.
https://drive.google.com/file/d/1TjkHUrN8qe8yG8MmRCwXiNFpBBpMSvAV/view?usp=sharing
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

---

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

---

📓Notation based on the Specified Commercial Transaction Act📓
I have published a detailed document on Google Drive, see document below. If you have any problems with payment or , please us using the information in the document below or via platform message.
https://drive.google.com/file/d/1rOKYstIj3QgHjGHDQpxW496CjzwUfTXK/view?usp=sharing

🖨Print Setting🧵
　Infill:15-20%
　Filament material: PLA

[Layer Height]
　Layer Height: 0.2mm
　Initial Layer Height: 0.2mm
[Seam]
　Seam Position: Aligned
[Walls]
　Wall Loops: 2
[Initial layer Speed]
　Initial layer: 30mm/s
[Other layer Speed]
　Outer wall: 30mm/s
　Overhang Speed : 0, 30, 10, 10, 10mm/s [10%, 25%, 50%, 75%, 100%]
　Bridge: 30mm/s
[Acceleration]
　Outer Wall: 2000mm/s^2
[]
　Enable : none
[Raft]
　Raft Layers: 0 layers (none)
[Bed Adhension]
　Brim type: No-brim
[Prime Tower]
　Internal ribs: none
　Width: 15mm
　Brim Width: 0mm (none)
　Infill Gap: 100%
　Rib Wall: none

*After April 2024, Bambu and Prusa 3mf files will be compatible with each other, so there is no need to use them differently. (Only the set colors will be reflected unless imported into the corresponding slicer software.)
*These 3mf files are only compatible with Bambu Lab, Prusa printers. Therefore, they are not compatible with other companies' dual-head printers.
---2025/01/13---
*Creality and Anycubic printers will also be able to multi-print starting in 2024. 3mf compatibility is described below.

Creality Print:
It is compatible with both Bambu and Prusa. To use it, import the 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are retained in both Bambu and Prusa 3mf. There is no need to re-set the filament color.

Anycubic Slicer:
Only Prusa is compatible. To use it, import 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are not retained, so you will need to reconfigure the filament in ACE Pro by referring to the file for Prusa. (You can view the color settings for Prusa from Anycubic Slicer.)