Flexi Tiger Shark Mark-Ⅱ(Print-in-place)

[Update]
---2023/09/20---
Fixed mesh errors.
---2024/02/01---
Added 3mf file for Prusa Slicer.
---2024/05/14---
・The size and 3mf coloring of the Ship Stand has been changed.
・Lite version of the stand model has been added. This is cost-effective stand model without the sunken ship decoration.
---2025/02/10---
Big Update! The shark has been reborn!
The t structure is new and more flexible than before. (No change to the stand.)
Older version (v2 and earlier) have been compiled in an archive file. You may continue to use the older version for commercial use, but I strongly recommend you to use the newer version of the model.
**Notice*
Some s have reported that they cannot open 3mf files for Bambu in Bambu Studio. This issue is currently under investigation, and I do not know what the cause is.
If you are experiencing this problem, please use Prusa file as it is compatible.
---2025/02/26---
"Authorized Seller Badge" is avalible!!
Three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge.

---

This is an upgraded version of the flexi tiger shark I published on Thingiverse.
https://www.thingiverse.com/thing:6201949
A new tiger-like pattern has been added and a sunken ship-shaped base is included.

This model includes the following digital content,

01: STL - Tiger Shark
02: 3mf (Bambu)- Tiger Shark
03: STL - Ship Stand
04: 3mf (Bambu)- Ship Stand
05: 3mf (Prusa)- Tiger Shark
06: 3mf (Prusa)- Ship Stand

02 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 05 and 06 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files.
*After April 2024, Bambu and Prusa 3mf files will be compatible with each other, so there is no need to use them differently. (Only the set colors will be reflected unless imported into the corresponding slicer software.)
*These 3mf files are only compatible with Bambu Lab, Prusa printers. Therefore, they are not compatible with other companies' dual-head printers.
---2025/01/13---
*Creality and Anycubic printers will also be able to multi-print starting in 2024. 3mf compatibility is described below.

Creality Print:
It is compatible with both Bambu and Prusa. To use it, import the 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are retained in both Bambu and Prusa 3mf. There is no need to re-set the filament color.

Anycubic Slicer:
Only Prusa is compatible. To use it, import 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are not retained, so you will need to reconfigure the filament in ACE Pro by referring to the file for Prusa. (You can view the color settings for Prusa from Anycubic Slicer.)

---

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the and conditions below.
https://cults3d.sitegames.net/en/licenses#cults_cu_nd
---2025/02/26---
Authorized Seller badges are now available in three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge. Please show badge or indicate credit when you use the service.
---2025/04/02---
The of Use have been established in accordance with the classification of commercial model licenses. This model falls under the “AC-Model (Anyone Commercial use model)” in the of Use. For details, please refer to the following of Use.
https://drive.google.com/file/d/1TjkHUrN8qe8yG8MmRCwXiNFpBBpMSvAV/view?usp=sharing
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

---

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

---

📓Notation based on the Specified Commercial Transaction Act📓
I have published a detailed document on Google Drive, see document below. If you have any problems with payment or , please us using the information in the document below or via platform message.
https://drive.google.com/file/d/1rOKYstIj3QgHjGHDQpxW496CjzwUfTXK/view?usp=sharing

🖨Print Setting🧵
　Infill:15-20%
　Filament material: PLA

[Layer Height]
　Layer Height: 0.2mm
　Initial Layer Height: 0.2mm
[Seam]
　Seam Position: Aligned
[Walls]
　Wall Loops: 3
[Initial layder Speed]
　Initial layer: 30mm/s
[Other layder Speed]
　Outer wall: 30mm/s
　Overhang Speed : 0, 0, 10, 10, 10mm/s [10%, 25%, 50%, 75%, 100%]
　Bridge: 30mm/s
[Acceleration]
　Outer Wall: 2000mm/s^2
[]
　Enable : none
[Raft]
　Raft Layers: 0 layers (none)
[Bed Adhension]
　Brim type: No-brim
[Prime Tower]
　Internal ribs: none
　Width: 15mm
　Brim Width: 0mm (none)
　Infill Gap: 100%
　Rib Wall: none