hands3 Bereich für das Handy - nsfw Ansicht

nsfw view

Hands3

Hands-free mounting for The Handy

Want to go hands-free with The Handy? Hands3 is a custom 3D-printable mount designed to securely hold your handy, so you can sit back, relax and enjoy. You can also lay in bed or stand up too - Whatever suits you :-)

This can be a wearable with belts around your hips and waist or vesa mountable to a monitor arm. You can use the belts to hold it to the back of a chair or even use a ratchet clamp to hold it discreetly under an adjustable height desk.

Angles can also be adjusted as required using the angler plates and push pin rack system as illustrated. You will need 2 prints of the split push pin rack for 1 pin and you need either 2 for the small plate or 4 for the big plate - so print 8x of these split push pin rack parts and 8x of these push pins.

I have also added fixed angle hands3 prints if preferred - This includes the Angled Up AU, Angled Up Further AUF, Angled Up Further Further AUFF, Angled Down AD, Angled Down Down ADD, Angled Down Down Down ADDD as well as a hands3 mini that can be useful if you have some extra abdominal weight or even muscle that could push against a standard sized hands3 changing the angle required.

I have also added 3 ultra strong new versions that should help a slight cracking issue some s may have depending on print quality and accidental misuse - i.e shoving the handy in or pulling out at an angle that over flexed the previous cylinder part.

For this reason, I recommend printing the "New dice version" or "New dice Au" or "New dice Auf" for stronger prints and the added bonus of not needed to use a trilancer cinch strap.

hands3+ (3 rows of belt slots) standard and Au (angled up) have also been added - For taller guys 6'3+.

New Alt hands3 design added - To strap/belt around groin and leg. Could be useful for an alternative hold of the handy from the waist and hip wearable set up or even together as an alternative to switch out to and from. Thanks to a cool handy community member called Ehhnygma, that suggested for me to design around this way as an alternative. This way can unlock allowing you to lift a leg up during use for added comfort and realism.

You can use this mounting for the handy to enjoy great 18+ interactive content from awesome sites like

www.sexlikereal.com

or https://faptap.net/

and games like

www.adultvrgameroom.com

This is a digital — No physical product is included.

You’ll get the STL file to print your own mount at home or through a local 3D printing service such as https://craftcloud3d.com/ and you can get 10% off with this referral code: REFKJ7PW3K8

Or a limited selection of prints can be ordered here - https://www.etsy.com/shop/hands3parts - Best for USA shipping.

You can also try out https://www.etsy.com/shop/hands3parts - Best for USA shipping - Prints done at 25% infill and it should be a easier process as you just click for what you want and make savings on the limited bundled packages.

What You’ll Need:

Trilancer cinch strap: This loops around the handy and holds it to the Hands3 print. Depending on your print quality, you may not need this at all. If you do, loop this into the hands3 first then add the belting, whether that's with the quick release buckles or the cinched at sides way. An 18" or 24" strap from the trilancer multi pack will be needed for this. Though if you print the new dice, new dice au or new dice auf - you most likely will not need the trilancer cinch strap at all.

An alternative is place a paper tissue over the cup section then slot your handy in to form a perfect tight friction fit. This cape like piece can be a hero in not only holding the handy in but also for drying up and cleaning up afterwards too.

Tactical duty belts - 2x 2" / 50mm wide, Velcro backed, with quick release buckles. These can be used cinched with the hands3 print or with the quick release buckles.

UK Amazon example:

https://www.amazon.co.uk/Tactical-Combat-Utility-Bearing-Release/dp/B09HRLDKGC - £7.47

US Amazon example:

https://www.amazon.com/LAKE-FIRE-Heavy-Duty-Adjustable-Wear-Resistant/dp/B0C5RJ6N55 - $9.99

EU Amazon example:

https://www.amazon.de/-/en/SIVENKE-Tactical-Adjustable-Security-Activities/dp/B089YR5H8S - €9.99

Japan Amazon example:

https://www.amazon.co.jp/-/en/Dhana-Tactical-Military-Survival-Outdoor/dp/B0716VSYNT - ¥998

Important:

You are responsible for printing and assembling it yourself. By ing and using this design, you agree that I’m not responsible for any damage, injury, or issues caused by improper use, modifications, or printing quality. Use it safely and responsibly.

Enjoy

[This is not an official handy product]

3D-Druck - Standardeinstellungen von 0,2 Schichthöhe, von einem 0,4 Werkzeugkopf.

Weitere Qualität kann mit einer Schichthöhe von 0,12 oder durch Aktivierung der variablen Schichthöheneinstellung in der verwendeten Slicer-Software erzielt werden.

Petg-Filament in Weiß oder Blau ist aufgrund des Titandioxidgehalts am stärksten.