Flexi Factory Chicken 包含 3mf 文件！

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE hip is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help the creative work of each 3D artist and NEVER share or sell a digital file.
.............................................................

3D model description:
I have received tons of requests for a chicken, and thought it was time to a a Farm Flexi to the mix. Watching my wife hilariously trying to impersonate a chicken running around with little tucked wings was um, ... helpful!?!

For you AMS printers you will find a head with bigger pupils. I felt these eyes worked better for multicolor. Smaller pupil for single color.

Included are 5 files:
- 3mf colored project file
- STL Chicken body
- STL Chicken head
- STL Left Wing
- STL Right Wing

Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added 3mf files as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without s.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://cults3d.sitegames.net/en/s/FlexiFactory/creations

link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

Print tips and Info: 

• I test between 50% and 150% for functionality. BUT... I do not suggest smaller than 65% for this model. The links and footprint are tiny so detail will be lost and it could lead to failures. High quality materials and settings should be considered the smaller you go. The wings could be especially fragile.

• STL and 3MF files are included. * If you use the 3mf file, please that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

• I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.

• Make sure you have good adhesion. I always use a glue stick.

• Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory     *As an Amazon Associate I earn from qualifying purchases