hey on your Cybertruck mount, do you have a pic installed? it goes in the charger area right and then gives it some height?
- 0 мне нравится
👋 Всем привет! Эта тема является публичной, поэтому давайте будем вести себя вежливо и уважительно. Никакой рекламы, спама или гадостей!
🇦🇷 Страна пользователя: Аргентина
🌐 Предпочитаемый язык пользователя: Английский. Вы можете переводить онлайн через DeepL.
💡 Вы имеете в виду конкретную модель? Добавьте ссылку, название или номер модели.
🖼️ Хотите разместить фотографии? Используйте бесплатный хостинг типа ImgBB и вставляйте ссылки в сообщение.
✍️ Советы по написанию**: Используйте формат Markdown, чтобы структурировать текст и сделать его более читаемым.
Напишите ваше сообщение:
34 комментария
Hi! I don't have any Cybertruck models published.
- 0 мне нравится
Been charged £94 not 94p on my card how do I dispute this
- 0 мне нравится
Hello! Don't worry, I can reimburse you
- 1 мне нравится
Transaction come out my bank can you reimburse please
- 0 мне нравится
I've already requested a refund from Cults and it's listed as "pending." This is the first time I have requested a refund, so I don't know the waiting times in these cases. In any case, rest assured that we will solve it somehow.
- 0 мне нравится
Thank you
- 1 мне нравится
Hello, from my side I can see that the order was refunded. please tell me if everything is in order
- 0 мне нравится
Hello, do you have a phone holder from Alemannia Aachen ?
- 0 мне нравится
Hi! I designed this Alemannia Aachen phone holder especially for you. I hope you like it, and if you have any questions, feel free to send me a message. Here’s the link: https://cults3d.sitegames.net/en/3d-model/gadget/alemannia-aachen-phone-holder Thank you very much! :)
- 0 мне нравится
Awesome. Thank you so much!!!
- 1 мне нравится
Thank you very much! Enjoy it!
- 0 мне нравится
Ah bueno por lo quiero hacer de 15cm x 20 cm y no quiero q me quede muy alto
- 0 мне нравится
En ese caso tendrías que revisar si tu programa de modelado te permite agrandar los ejes X e Y sin afectar el Z
- 0 мне нравится
Ah dale me fijo haber si lo luego modificar. Gracias ahora lo compro entonces
- 0 мне нравится
Dale, cualquier cosa me podés escribir a [email protected]
- 0 мне нравится
Buenos días una consulta q altura de z tiene ?
- 0 мне нравится
Buenos días, me podrías especificar el modelo sobre el que tenés la duda?
- 0 мне нравится
Buenos días una consulta q altura de z tiene ?
- 0 мне нравится
Buenos días, me podrías especificar el modelo sobre el que tenés la duda?
- 0 мне нравится
El llavero de gimnasia
- 0 мне нравится
Bien, tiene 5mm en el eje z si contamos el dibujo
- 0 мне нравится
Hello, how long does the telephone need to be printed?? https://cults3d.sitegames.net/en/3d-model/gadget/e-para-celular-do-gremio
- 0 мне нравится
Hello! If you print it at a speed of 40 mm/s, it could take up to 10 hours
- 1 мне нравится
hiya your premier team coasters pack do u have a holder that would also fit them if so can u send the link to it many thanks
- 0 мне нравится
Hi! I don't have a coaster holder, but if you want you can send me the specifications and more details about that model to [email protected] and I can work on it :)
- 0 мне нравится
Can you make me the Genoa key ring? I saw that you have it from Sampdoria. Thank you :)
- 0 мне нравится
Hello, you can it through the following link: https://cults3d.sitegames.net/en/3d-model/jewelry/genoa-fc-keychain
Thank you so much!
- 0 мне нравится
Bonjour
Acceptez vous que l'on revende l'objet imprimé ?
- 0 мне нравится
Hello, no problem at all! :)
- 0 мне нравится
My friend only signature of lando Norris not the plated
- 0 мне нравится
Hi! I replied to you by email and sent you the updated model
- 0 мне нравится
Hello I want to ask if is possible only signature of lando Norris not the keychain thanks if is possible
- 0 мне нравится
Hello! Yes of course. I think you sent me an email, I'll send you an email when I have the design ready and ed to Cults3D so you can buy it :)
- 1 мне нравится
Hi! I just purchased your Nevada phone holder and loaded it into Cura. Can you please tell me how I am supposed to print it or does it print like it shows on the plate, standing up? Do I put s on only touching build plate? Do you have any other settings I need to use like infill etc? I don't know much about buying files from here so I wanted to ask you if I am allowed to sell any of the prints I make with your files because there are several I would like to purchase. Thank you in advance for your time. Giamarie
- 0 мне нравится
Hello, first of all thank you very much for your purchase! To print this model you must rotate it so that it is horizontal with respect to the printing bed. You should configure the s so that they only touch the print bed.
I use the following settings and it is perfect in my Ender3:
Nozzle: 0.4mm.
Layer height: 0.2mm.
Filling density: 5%.
s: yes.
structure: normal
If you have more questions and want me to send you images to help you with the printing process you can send me a message at [email protected]
Thank you very much for your purchase again and please let me know if there is anything else I can help you with.
- 0 мне нравится
Hello, I hope you don't mind me reaching out, but I'm having issues getting a coaster to print. I'm new to 3D printing and this would be only my 2nd attempt at coasters. I have a Bambu A1 Mini and printing in multiple colors. I tried printing them face down but that doesn't seem to help. Could you possibly help me or guide me to a video that may help? Thank you.
- 0 мне нравится
Hello, if you want, send me an email to this address [email protected] and I can help you. I can teach you how to print in Ultimaker Cura, which is the software I use
- 0 мне нравится
The diamondbacks keychain logo did not work on my Ender 3D printer. It started fine, but was all messed up after 10 minutes…
- 0 мне нравится
Hello, I'm sorry to hear that... if you want you can send me an email to [email protected] with the details of the problem and I will make a new version of the keychain so you can print it. I can also refund your money, but it would be helpful for me to have details of the problem so I can modify the design for future buyers. Thank you very much and I am sorry for the inconvenience
- 0 мне нравится
Hello, I'm looking for a designer to make some multicolored 3d prints for my single extruder (coasters/keychains). These items would be for sale at local art fairs. Would you be interested in deg? If so, how much.
Tx
- 0 мне нравится
Hello, yes, I am interested. You can send me a email to [email protected] to discuss the details of the designs. Thank you very much!
- 0 мне нравится
Hola, cuando me saldria diseñar el llaver de un instituto de educacion? tiene dos colores, tengo el logo.
- 0 мне нравится
Hola, si queres envíame un mail a [email protected] así veo que es lo que necesitas y te paso el precio
- 0 мне нравится
Hi, I bought the file and honestly I'm not happy with the result. I printed in two different sizes both vertically and horizontally but the result is always bad. I would not recommend the purchase
- 0 мне нравится
Hello, I am sorry for the delay, I was on a trip and I couldn't see your message. Can you remind me which file did you buy so I can help you? I am sorry for the inconvenience
- 0 мне нравится
Buenas tardes, estoy interesado en el llavero de Colon, pero segun veo la foto parece que solo una parte tiene relleno y la otra es hueca, consulta es asi? o la parte hueca viene aparte para poder imprimir en 2 colores? gracias.
- 0 мне нравится
Hola, el llavero de Colón está diseñado en tres profundidades distintas para poder imprimirle los tres colores del escudo
- 0 мне нравится
Ok, entonces no me sirve gracias :) y muy buenos trabajos, espero algun dia poder llegar a crear de esa manera.
- 0 мне нравится
Muchas gracias por tu comentario! Me alegra mucho que te gusten mis diseños :)
- 0 мне нравится
Hola, hablame a [email protected] y coordinamos el pago y entrega del archivo que quieras!
- 0 мне нравится
Hola! Quiero comprar el archivo y pagarlo con mercado pago. Puede ser?
- 0 мне нравится
Hi, I would like to buy some of your crypto currency key chains, but are you able to fill the holes so they are just coins and not key rings?
- 0 мне нравится
Hello, I am sorry but I don't have the coins models of the Crypto Currencies keychains pack
- 0 мне нравится
Hi, I would like to but some of your crypto coin keyrings, is it possible you could remove the hole for the key chain please, so they look more like coins?
- 0 мне нравится
Hello, I am sorry but I don't have the coins models of the Crypto Currencies keychains pack
- 0 мне нравится
Genial, envíame un mensaje a [email protected] con el modelo que querías y puedo crear un link de pago en MercadoPago para que puedas transferirme por ese método de pago :)
- 0 мне нравится
do you have stl file for NFL keychains not logo but lettering? like "Raiders" instead of the logo.
Hi, I don't have them yet but if I design them I'll let you know!