29 комментариев

Hi,

Thanks for reaching out.

Could you let me know exactly what the print looks like now—stringing, gaps, rough edges? A bit more detail will help me narrow things down.

The font set was designed and tested for a 0.4 mm nozzle, so a switch to 0.2 mm can introduce extra variables (clogs, under-extrusion, different flow settings, etc.).

If it’s easier, feel free to send a quick photo of the problem to [email protected] and I’ll take a closer look.

We’ll figure it out together.

Best regards,
Jason

I don't currently have that on offer.

Thank you for your message! Unfortunately, I’m not offering custom designs at the moment. Sorry that I can't help with this request.

Wishing you all the best, and thanks for understanding!

Best regards,
Jason

bonjour ha c'est dommage tant pis pas une bonne nouvelle pour moi car je trouve personne pour le faire :(

Hi,

Most of the cutters should work fine since they are under 10 cm at their longest side. However, I do have some individual cutters that are larger than 10 cm, which might be too big for your printer's build area.

As for the cake pop molds, they should all print without any issues on your Entina 3D printer. Let me know if you have any other questions!

Best regards,
Jason

Hello,

Thank you for your message! Unfortunately, I’m unable to make custom adjustments or modifications to the designs at this time. The cutters are sold as-is. Let me know if you have any other questions or need further assistance!

Best regards,
Jason

That's right, I actually wanted to this as a free again and forgot. I have just ed them :-)

That sounds very exciting! I’m actually based in Leipzig myself. 😊 Yes, I do offer a commercial license through my Patreon. You can check it out here:

https://www.patreon.com/cactus_cookies

Feel free to reach out if you have any questions. Wishing you lots of success with your shop in Berlin!

Best regards,
Jason

Hi Jason! Awesome, thank you. How can I see the full range? Do You have other seggs-positive cutters? :)

Thanks for reaching out! You can find my entire range of cutters on my Cults3D page. Feel free to check them out, and let me know if you have any questions!

Hi, I did, unfortunately you don't have any dick cookie cutters :(

No sorry not yet :-/

I am very sorry but I am currently unable to create customised cutters.

By subscribing to the Tier on Patreon, you'll gain access to all new designs released during your hip period. However, access to previous designs is not included.

Thank you for the clarification! Is there any way to access all previous designs for commercial use? Also, if I buy individual designs on Cults, am I allowed to list them for sale on my shop with proper credit? Thanks in advance!

As long as you are a paying member of my Patreon, Basic or Member, you can sell 3d prints of my designs, including those you have purchased on Cults. I offer my complete catalogue here:

https://digitalcactuscookies.etsy.com/listing/1680088967

I hope I was able to help you with this :-)

Hi! The cookie cutters are each 4 x 4 cm (1.6 x 1.6 inch).

Thanks for your message! I’ll be listing the gingerbread man cake pop mold and some other Christmas-themed items in the next few days, so keep an eye out for them!

Thanks

When I go from left to right:

2 4 3 1

Thanks for your message! The cookie cutter is part of this set if that's what you mean: https://cults3d.sitegames.net/en/3d-model/home/30-wording-positivity-motivation-cookie-cutter-set-0300

Serait-il possible d’avoir le model seul ?

I have just ed the cookie cutter as a free :-)

https://cults3d.sitegames.net/en/3d-model/home/be-happy-cookie-cutter

Thanks for your interest! Unfortunately, I don't currently offer a bundle for all the Halloween cookie cutters. However, you can find them individually listed, so you can mix and match to suit your needs!

Hi, not yet but that's a good idea. I'll keep it in mind for the future.

Hi! I'm sorry but I have to disappoint you. Unfortunately, I don't have a hot air balloon cutter.

No problem, thank you very much for your answer. I find your designs very great. Is it possible to put in place a partnership together. Sometimes, I need different cookies cutters as I'm a baker. Is it possible for you to work on some designs for me when I need ?

Thank you for your kind words about my designs! I’m glad you like them. However, I’m sorry, but at the moment, I’m not offering custom cookie cutter services.

Hi, not yet but that's a good idea. I'll keep it in mind for the future.

Sorry but currently I am not able to provide custom services.

Hi there!

Welcome to the world of 3D printing! I'm glad to hear you're interested in my cutters. To print my cutters and sell the cookies you make with them, you would need to become a member of my Patreon. By ing, you'll not only get the rights to use my cutters for commercial purposes but also gain access to a wide range of exclusive monthly releases, discounts, and more.

You can find all the details and sign up on my Patreon page here: https://www.patreon.com/cactus_cookies

If you have any other questions or need further assistance, feel free to ask.

Best regards,
Jason

Hi there,

Thank you for reaching out! Unfortunately, I don't have any lacrosse cookie cutters at the moment :-(

Best regards,
Jason

Hi there,

unfortunately you can't use the photos of my listings, but you can use the renders in png format with your own mockups, which is also a huge time saver. As a paying member of my Patreon Community you get the possibility to offer 3d prints of my models commercially and you will also receive new sets every month. You can also contribute new ideas, which we will vote on together as a community. You can find more information here: https://www.patreon.com/cactus_cookies

If you have any questions, please let me know.

Greetings
Jason

PNG is much better. Let's start my hip immediately. thanks

Hi there! 😊

No need to apologize at all! It's a great question. Yes, you're absolutely correct! The cookie cutters are designed with two separate parts:

• The first part is the cutter, which is used to cut out the outline of the cookie.
• The second part is the stamp, which is used to imprint the details onto the cookie after it's been cut.

Feel free to glue the handle to the stamp if you'd like!

If you have any more questions or need further assistance, don't hesitate to ask!

Best regards,
Jason

Thanks so much for answering :D

Hi! I just checked the listings that were purchased through your name and all should have the stl files shown. It would be nice if you could let me know which set you are having problems with so I can help you further. You can also send an email to: [email protected]

https://images.cults3d.sitegames.net/f0wTBZ662ezirM72_d6k0uw1iM0=/113x113/top/filters:format(webp)/https://fbi.cults3d.sitegames.net/ers/22276410/illustration-file/a186cb23-989d-4ccf-b953-626fd8de7487/Bild.jpg