Adderini - 3D-печатный повторяющийся слингбоу / арбалетный пистолет

This is a 12 shot Adderini “Conversion kit” pistol crossbow. I Use for target practice, The slicer that I used is Cura, layer height of 0.2 mm, extrusion width of 0.45 mm, bottom and top walls thickness of 1.2-1.6 mm , s on magazine, body left, and right touching build plate. wall thickness of 2.25 mm, infill of 40%for most of the print and 100%infill for cocking lever, trigger and small parts. Printing time in total about 50 hour’s