девушка

Hello !

Here's a fun project, to help you getting a russian red dot sight lookalike for cheap (the price of an CMORE / SRO / RMR, around 30-40 bucks,which is quite good since these are nice little optics). You just insert the CMORE / SRO in the shell and you are done!

For SRO version, Both SRO and RMR can be mounted, but the RMR will sit lower and has a much smaller window, which isn't as comfy to use as the SRO. SRO sits perfectly though !

The whole shell is dummy: the switch, adjustment knobs... are all fake. You still have the access to all the red dot setting screws. Dimensions have been measured on a chinese Kobra copy, so the overall dimensions are very accurate to real ones.

The hardware is written on one of the project picture. Nothing special, use ISO7380 (hex socket button head screws, very common and nice screws) since they have a lower head compared to standard screws. These screws can also be used for the RMR mounting screws if needed.

The CMORE version can be used with the stock CMORE rail. But the stock screws can be a bit short (they engage on maybe 1mm, which is at the limit), I recommend swapping them. You can also the Kobra rail included, in this case 2 M5 nuts keep the Cmore in place in the mount. Insert the cmore_onoff wheel over the switch by forcing it (a tiny bit, if it's too hard sand the wheel a bit).

Nothing special, small s for the side adjustment tab of the body.