Треугольный абажур для напольных или подвесных ламп | Triangular lampshade for floor or hanging lamps

This is a large triangular lampshade designed for use with either a floor or hanging lamp. I am using a 7.5W Philips Hue E27 bulb with a matching diff inside the lampshade.

The shade is made up of three identical sections, each with grooves on one side and tongues on the other, which are slotted together and permanently bonded with superglue. The continuous tongue at the top of each shade section is glued into the corresponding groove of the lamp holder. Please check that everything fits together before assembling and glueing.

STEP files are available for your customization. A version of the shade without holes is also available for .

Caution: Please only use LED bulbs with this shade and ensure they do not get too hot, as the shade may otherwise warp or even catch fire, depending on the material used. I disclaim any responsibility/liability for any damage/issues resulting from the use of this lampshade.

If you like :-) Thank you very much!

--- German description ---

This is a large triangular lampshade for a floor or hanging lamp. I use a 7.5W Philips Hue E27 lamp with matching diff inside the lampshade.

The shade consists of three identical shade parts, each of which is inserted into one another with grooves on one side and bungs on the other and permanently connected with superglue. The continuous bung at the top of the shade parts is glued into the corresponding groove of the lamp holder. Before ing and gluing, please check that everything fits together.

STEP files are available for your customizations. There is also a glider version without holes in the area.

Attention: Please only use LED lamps for the screen and make sure that they do not get too warm, otherwise the screen could deform quickly or even catch fire, depending on the material. I disclaim any responsibility/liability for any damage/problems caused by the use of the lampshade.