Lightning Mcqueen 1/8 Body

Ever wanted to kachow your parking lot? Print Lightning Mcqueen body for your rc car and turn everyones heads!

The body consists of main three parts that can be glued and screwed together.

Wheels are the scale looking CARS nascar wheels which design suits regular traxxas slash tires.

Eye socket is deigned to have a sheet of abs plastic painted with eyes and eyebrows and fitted with 5mm magnets. So you can change your batteries from above if you are using slash chassis for the drivetrain.

Decals are not included, so please figure it out by yourself in your area.

If you have any questions about fitting the chassis or printing the body - message me.

The Lightning of mine is sitting on Traxxas 2wd Gravedigger chassis lengthened a bit and shortened by width ( cut down a-arms)

Fdm parts are in Fdm folders.

I used Elegoo neptune 4max for printing main body parts.
0.4mm nozzle
0.2mm layer
30% infill
6 perimeter layers
4 top layers
4 bottom layers

Resin printing parts are in Resin Folder
There are not many resin parts, so print it the way you prefer more. Even the fdm printer can do those.