13 commentaires

Hey friend, do you have a Dogtra? What model is your collar? Could you design a holster for the transmitter?

hi i have ed micky mouse toothbrush holder
i dont seem to have the black bit that holds the ears in place or is the main in two colours?
thanks

datei Boutton kann net geöffnet werden

On vacation this week but I think I can give it a stab in the new year.

Hi !

I'm refering to this : https://cults3d.sitegames.net/en/3d-model/game/custom-card-dividers-for-lord-of-the-rings-journeys-in-middle-earth

Do you think you can add the Spreading War dividers ?
It includes new characters (Fréahild, Dwalin, Boromir, Rénërien, Calaminth Took, Beorn and The Great Bear)
And 6 roles (Lorekeeper, Guide, Shieldmaiden, Provisioner, Soldier, Trickster).

There is also a new card category : Banes

I would be greatful if you could do thoses.

I watch your template f3d file, but I'm not into 3d modelisation ^^

Thanks

Thanks for your inquiry! I have been asked this question by others before. I think it's a good game but I didn't like it enough to buy the expansion so, no, I have no plans for making a version that accommodate expansions.

Hello Fuchsr,
I have ed and print your Takenoko Insert/Organizer, and I must say it works great, but have you considered making a similar model for the Expansion (chibis) just asking since it's wonderful and all, but I got the expansion...

thanks in advance for your consideration

I love your paint holder :D
It's the best one for me.
I'm afraid to ask, but could you make one for Citadel colors too? -
Thank you for your models, you are awesome <3

Oh, sorry. That was my first message ever here. This is in reference to the spool roller that snaps on top of the Prusa MK3s+ When it came in the slicer said is was too large and scaled it to just fit on the build plate. I figured later it was probably a metric to Imperial thing. Nice design, I was looking for exactly this. I was going to model one in Solidworks but figured I check to see if one was out there.

The slicer says the file is coming in too large. I don't get that message for many parts but not knowing the actual sizes or scale, I'm not sure if what is coming in is correct.

I loved this game when it first came out in the 1980s. I see that from the pictures that they have removed the cartoonish images, which I actually liked. Thanks for the memory.

Used Google translate to translate your message. I understand you're new to 3D printing and are trying to figure out what settings to use. Of course, settings will be different for different printers but for my Prusa Mk3S I used 0.3 mm layer height, 10% infill, 2 perimeters, 3 bottom layers, 4 top layers. To get the honeycomb pattern for the sides, I use 20% infill and no top or bottom layers. Print temperature is 210 C and 60 C for the bed. Print speed is 50 mm/s for perimeters, 85 infill and 180 travel (which is 0.3 mm DRAFT preset in PrusaSlicer). Again, I don't know what printer you have, and I am sure some of these parameters will have to be adjusted. For example, on my Wanhao i3 I would have to slow print speed down to closer to 40 mm/s. I don't know what problems you're seeing and I'm really not in a position to troubleshoot your problems, but I hope this helps a bit. A good source for advice is the 3dprinting subreddit on Reddit, or any subreddit specific to your brand of printers.

Hola, estoy intentando imprimir este archivo "https://cults3d.sitegames.net/es/modelo-3d/juegos/modular-holder-for-miniature-paints-and-brushes" pero sin éxito. Es la primera vez que imprimo. Me podrías ayudar con los ajustes que necesito porque lo he intentado muchas veces y no lo consigo. Gracias.