Hey, I have a a1 mini bambu 3d printer and I was wondering if the speed jet boat can fit on to it. a skeeride2 can fit on to my printer because I'm printing one right now, but I just need to have less parts printing at a time
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇳🇴 Pays du membre : Norvège
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
73 commentaires
Hi. it will fit on a 220x220 plate. Belive the mini is smaller then that so no.
-VD-
- 0 j’aimes
My Bash Jet is allready running.
Speed Jet is in Production.
Very good driving Boat.
Would you mind publishing a smaler Version of it for the m 30 Jet with the scale of the Supersprint?
I would buy them.
Only thing that i would Chance is the Lid.
It is a little tiny for big Hands even on the big Version
- 0 j’aimes
Thanks for your & . I have had in mind a 10 scale version of the series doh I'm pretty limited on time. (kids fulltime job) Currently busy on a new sled design but after that I'll be back to boats.
-VD-
- 1 j’aime
hey love the design of the bash jet, but i dont have a 3d printer i have a few local 3d print services who can maybe print it for me as its a pretty big print size, can you give me a rough estimation of the price like how large the files are?
- 0 j’aimes
Hi. Now is the time to get started. Prices are god and printers need hardly any skills to get going.
-VD-
- 0 j’aimes
Hi. I have just bought 3D files to print Bash Jet boat. Please, could you guide me where I can find the file to print water jet M Jet 35??
Thanks
- 0 j’aimes
What size printer bed do I need for the basher jet boat?
- 0 j’aimes
Hello, I ed the files for the 165 Iceage skid but I don't see a file for the tension block.
- 0 j’aimes
Donyou happen to have the full hull stl, my printer is big enough I don't need to split it
- 0 j’aimes
Sorry i dont. Its comming but will still be a while. If your in the jet hub group I will be posting updates there. And if you already own the files you'll get an e-mail.
-VD-
- 0 j’aimes
Has anyone had issues printing Hull 1 for the m-jet 35? 2nd time now, I get to layer 335 and it starts printing in complete thin air.
- 0 j’aimes
Hi. Complete novice here. I ed the file to iPhone but my Creality cloud app won’t recognise it.
- 0 j’aimes
do you offer just the jig files for the M-jet 35 pump?
- 0 j’aimes
do you have to buy the pump seperate for the M jet?
- 0 j’aimes
i have the z brozs front suspension for the g5 skeeride 2 and the steering rack bar hits the upper a arm cross brace i'm using 100mm shocks like the description states to use any ideas why?
- 0 j’aimes
Hi. Are you using maverick modded frame. It use's a different style rack then stock. Iv failed to mention this.
- 0 j’aimes
i found the maverick frame in the mods but cant find the modded steering rack for the frame where is the different rack?
- 0 j’aimes
Is the rack for the mave frame. Try the one for the cat frame. Its more rounded at the edges I think.
- 0 j’aimes
Hi,
I just purchased the 175mm aluminum rails from Rrinter and was wondering if I purchase the 175mm iseage rail files will the rub rail work with the rails I bought?
Thank you
- 0 j’aimes
I do not know.
- 0 j’aimes
Having trouble figuring out how to scale your ZBORZ A arms and spindles with the SLYDOG Attack skies for a 150% build. Any suggests?
It loads them at like a 9.37% scale.
- 0 j’aimes
Sorry man im not big on the up scale. Ore you saying that the files load tiny??
- 0 j’aimes
I figured it out... They load as a 3.94 scale but, just multiple that by 1.5 = 5.91 which looks to give a 150% part.
- 0 j’aimes
hello, just dowloaded the idle track conversion and the idler wheels have the wrong bearing size. Any fix to this?
- 0 j’aimes
Hi! Thats strange. Iceage ore polar?
- 0 j’aimes
The one for the polar. The idler conversion hit for polar 2. The listing says 3x8x3 bearing, which is what is used on the stock set up. But definitely does not fit in your files. I belive you even have a comment saying so on the file comments section. Wish I wouod have read that instead of wasting 4 dollars
- 0 j’aimes
Sorry bout that. I have ed new ones.
- 0 j’aimes
Hey! I bought the bash jet and im almost finished! However im running into an issue, Im running the m-jet 30 and the receiver box isnt able to mount to the motor mount? Do you have an alternate file for using the m-jet 30 and receiver box? Thanks!
- 0 j’aimes
Hi! Sorry about that. I didn't think about that when I implemented the m jet 30. Would you post a picture in jet hub on FB and I'll send if I can make something. I don't own the m jet 30 but I'm sure we can figure it out easily.
-VD-
- 0 j’aimes
Hi I bought the Skeeride arctic cat model and in the stl files I don't have the new main frame is it normal?
- 0 j’aimes
Hi. The frame is a modefied sr2 frame and therefore not my designed so I can't sell it. You'll need to buy the sr2 files to get access to the modefied sr2c frame. Its all in the description and should also be in the read me file.
-VD-
- 0 j’aimes
Hi, love the designs! Apologies if this has been asked before; I purchased the plans for the Cruz Jet, but was thinking about building a Bash Jet. Would you consider offering some kind of special price for folks that already own one variant but want to build one of a different variant? No worries if not, never hurts to ask!
- 0 j’aimes
Hi. Sorry I do not have this option.I should probably have made that an option from the start but I felt people would be pretty sure of the style boat they wanted. Live and learn.
-VD-
- 0 j’aimes
I recently purchased the "Spindles For Polar SR2" files and the thickness is only 10.1mm compared to stock spindles that are 12mm. Is this by design? What skis do you recommend to use with your spindles?
Thank you
- 0 j’aimes
Hi. Its been a while so i cant the sizes. I know in the past I've used nuts to space out the ski ore in. All so know I made the spindle wider at the base around the hole the ski mounts to. Is the HD spindle the same?
- 0 j’aimes
10.1mm is the width of your HD Spindle. Your standard spindle is only 8.61mm wide. The stock skeeride spindle is 12mm wide. Can you update your design to 12mm so they will fit correctly in the ski?
- 0 j’aimes
Working on it
- 1 j’aime
e now
- 1 j’aime
I have an ai-mini. Thought it would work but the printer is to small. Could I get a refund since I can't use the file?
- 0 j’aimes
Hey I was the one who commented on the self righting boat. I could probably test it when my pond thaws from winter! Only issue is I don't have the files for the boat I commented on. I only have the speed jet files. Is this feature coming for all boats?
- 0 j’aimes
Would you hett me up on FB? easier. https://www.facebook.com/profile.php?id=61564797217887
- 0 j’aimes
Done
- 0 j’aimes
boa tarde.. o Arquivo do casco do barco não vem dividido? não sei fazer divisão de arquivo 3d. vocês deveriam colocar as partes do casco separadas.
- 0 j’aimes
o m-jet 30 ou 35 eu pensei que já estava os arquivos.. eu tenho que comprar a parte?
- 0 j’aimes
English...
- 0 j’aimes
Good morning. The bash jet file is not divided as in the EXPLODED VIEW image (boat hull, the other parts are ok).
- 0 j’aimes
Morning. Im sorry i do not understand 😅
- 0 j’aimes
the hull of the vessel is not fractionated for printing.
- 0 j’aimes
the bash jet.3mf file is not like the "EXPLODED VIEW.jpeg" file
- 0 j’aimes
Oh. All the parts hull included are divided out in to folders.
- 0 j’aimes
The 3mf file is as labled. A model for you to paint so you cant finde your preferred color scheme.
- 0 j’aimes
Hi there,
I'm experiencing some issues with the Bash Boat roof piece. On one of the pieces, the connecting side with the tong looks fine when placed in the Orca Slicer, but when it's sliced to generate the gcode, gaps appear in the tong. Additionally, the other roof piece seems to have a design defect that prints out as well.
I've attached links to the pictures for your reference. Please let me know what you can do to update the file and fix the issues. If there's a setting on my end that can fix it, please guide me on how to change it. You can also reach me at my email below.
Thank you,
Greg
https://ibb.co/QKY9Mgt
https://ibb.co/TWyYDpn
https://ibb.co/kMyjjv4
https://ibb.co/cJBmCmM
https://ibb.co/Qd7F03b
https://ibb.co/yp9h9T8
- 0 j’aimes
👋🏻 hey I am going to start building and selling skeeride rc snowmobiles, I was wondering if I could use you parts on them?
- 0 j’aimes
Your model and Mjets are being sold printed on aliexpress. I think you should sue them
https://s.click.aliexpress.com/e/_oFsrvA2
mjet is not from this guy