148 commentaires

It is meant for airsoft, so I don't even know ;-)

Hi!
Sales are permitted as long as no drop shipping platforms are used and the products are created using 3D printers owned by you. Outsourcing production or shipping/sales to external companies, as is the case with temu, for example, is not permitted.
So selling it on your own etsy shop for example would be perfectly fine.

Hi,
is it possible, that you inserted the snap mini the wrong way? The holders have a small raised section on one side, making the diameter larger than 5mm. The raised section must be on the front of the card, so it must face outwards on the box.
I printed the new box on several different printers, and the Snap Mini fits perfectly. It even falls in when inserted, so it's not that tight at all.

Definitely no chance. I tried from all angles. I know what you mean with the slot like shape of the snap minis unfortunately no orientation makes the minis slide in like you describe which is odd because the tolerances you made are usually so good not sure what the issue is. This COULD be an issue with varying flow rates and expansions of different PLA's but im using a very standard kind of PLA where everything has been good so far. Is there any chance you could widen then margins a little more?

Ok thanks. Yes I will increase the tolerances slightly to make it work with all filaments hopefully.
I will update the files until tomorrow.

Okay thanks! Can you let me know when I can them and get the print started? Very excited for this new version!

Sure, in addition you will recieve an email notification, when the files are updated.

Done updating the files, please let me know if it worked for you.

It works perfectly now thank you! Mini snaps slide right in without any issue!

Awesome, thanks for testing!

Hi, to be honest I can not think of a way to adjust the boxes appearance to make it look like Iron Man, without completely redeg it.

I dont want it to look "like" Iron Man himself. I was just hoping you might be able to make the deck box more machine themed as opposed to the castle design. Maybe it's an absurd request. Youve made a fantastic file that prints and assembled beautifully and functions completely as intended and I could not be more grateful. It was only a thought. There's a lot of marvel themed decks out there right now and a commander deck box with some iron man flare would be amazing. At this point, your design is the best design I've ever purchased or printed. And ive printed hundreds if not thousands of files. Youre brilliant. I had to ask.

Thanks a lot for the kind words, allthough I understand what you mean now, I can not promise, to release another version of the design yet.
But I will definitely put on my list of possible future releases.

Hi there,
I adjusted the type B compartment accordingly.
You can it here:
https://we.tl/t-cI3HdRrSg7

I am not sure, because I do not have the short version myself, so I don't know what the exact differences are. I think it should fit though

No, the print volume of the bambulab A1 mini will be slightly too small.

No, since these are not designed by me, you can find the STLs on printables.

thank

Hello, there are no tolerances which need adjustment, I also printed it using Bambu AMS and it worked perfectly fine everytime. Which mechanism does not work exactly? Which print settings did you use? How does you print look, is it possible to get pictures on instagram chat?

My IG: @m.medel.caro
The teeth mechanism is very tight, and it is difficult to open and close, the back part that s both parts works relatively well, I tell you about the tolerances because I printed one in a single color and it worked well, however when using the AMS and not being able to configure that option for multicolor, it is too tight, if you can talk to me on IG to see more details

If it works fine with a single color, then the problem could probably be different shrinkage behaviour of the different colored filaments. I recommend to reduce the flow rate of the filament you print the teeth with.

Hi, please have a look at the designs pictures, there you can find the dimensions of every insert, as well as the general inner storage size.

Hi,

glad you like it! Yes I do offer commercial licences, you can get one by holding a monthly active subscription to my patreon.
Here is the link, which you can also find in the design description of the DnD dice box:
https://www.patreon.com/c/3DTechDesigns
Thank you!

Hi,
Go to your profile --> s. There you should be able to any previously bought file.

thanks I had to close the website and again. the first time I did it wasn't letting me, Thanks for the help

Hi there. 30 hours really? Mine roughly took 9 hours. that you can use a 0.6mm nozzle and bigger layer heights. But since you are unhappy with what you bought, I will refund your purchase.

Hi Alex. Don't worry! I am being an idiot haha. Didn't realise there was a handle option and non handle option... (whoops). thank you! Can't wait for it to finish printing

Well I already refunded, so if you end up being happy with the finished print, you could still leave the design a good rating.
Thanks.

Hi there,
maybe in the near future, it would definitely mean some work, since I would need to to adjust a lot of the boxes dimensions, because of the 5mm request, which now are just under 1mm. What is it for may I ask?

It's just that I want to make sure my card on the side will not be damaged.

Oh I see, I did not read that it is for the use of a plastic case sorry. Are 95x69x5 the dimensions of the case or did you already add some tolerance?

These are the dimensions of the case but online they have other dimensions. Let me check that again tomorrow.

Ok yes. They are the correct dimensions.

Hi, depends on how you adjust it. What would be the desired length?

i want it to be 212mm in the orientation you recommended

Well that's more than 10mm shorter, this will not work by just cutting the rear section. The whole handguard would need to be redesigned, to ensure the MLOK cutouts and the barrel nut still align correctly.

damn so i just waisted my money ? my printer cant go that high and i bought 7 inch version from you and now the 9 inch but i need something between ... you cant make me a 212 mm version ?

yes I can, but not until the weekend, as I am pretty busy right now. Please me on instagram, so that I can send you the adjusted STL file, when I am done.

sent mate

Hi there, unfortunately I do not make custom stls.

Use brims and make sure, that you have a clean print bed, you should clean it with isopropanol from time to time.
Also have you tried applying adheasive spray or glue stick to the print bed?
Also enable Z-hop during movement and lower print speed.

Thanks I'll give that a try. Print bed is clean. ALMOST got them finished this time. Hopefully this will fix it.

well the z-hop did the trick. Thank you!

Perfect!

Hi there, the 3MF file is meant for Bambu Slicer, if you have a bambu printer, if not you can ignore these. The reason why there are many files, is because many people asked for different options, which I then added. But they are just options, depending on what you like, generally you have to choose, which compartment type you like, which you can see documented in the picutures and can be found in the folder "Compartments". Then you can decide if you want to print the book in different color accents or in a single color. If you want to print multi color accents, you will have to print the files of the "MultiColor_Print_Book" folder. If you want to print in a single color, you can use the STLs of the main folder. The last thing you can decide, is weather you want the dragon symbol on top and bottom, or if you wish to use another class symbol. If you want to use another class symbol, you will need to print the STLs with the ending "_for_ClassSymbol" and choose one of the "Class_Symbols" folder

Hi there, what exactly are you having trouble with? If you want it to print in dual color with a single material printer, you can pause the print before the very last layer and change filament colors. The depth of the pattern is 0.3mm, so if you print with 0.2 or 0.25mm layer height, exchanging filament before the last layer should be no problem.

yeah the thing is that the lowest my printer goes its to 0.4 so it tends to screw up the pattern so a smooth no pattern option would be a good fix

0.4mm layer height? which slicer/printer do you use? normally you can set any layer height you like.
Also with 0.4mm layer height you will get a pretty bad resolution in generall and I am not sure if the design is working properly, it was testet with up to 0.25-0.3mm layer height, as recommended in the print settings.

Hi, it took a total of 230g for all parts.

I read thread below-I didn’t realize creator must print and ship. In addition to Patreon subscription price ($15/Month), how much extra money is required to print and ship?
Tx

Hi, I am not totally sure if I get your question right, but the hip on patreon is meant for people, that own a 3D printer and want to print and sell my designs, which they bought digitally.

Thank you for clarifying that this site is for 3D Designers to market their products; not for 3D enthusiasts/printers. If I want to order 3, with different color options, How much would it cost (less shipping)?
Tx
😉

I do not sell the printed objects, I design and offer the digital printing file.

Hi, no did not know it before, but thank you for suggesting it to me, I will see if I can maybe design something.

Hello, unfortunately it is not allowed to sell the designs on drop shipping platforms such as temu, alibaba, etc. This is part of the of use on patreon, please have a look on it. The designs need to be printed, sold and shipped by the seller himself. This is a pretty common term for most 3D printing commercial licenses. I tried to you several times over the last two months by the email you provided on temu, but did not get an answer.
If you do not agree to the of use, please cancel the subscription on patreon.
Thank you.

which rubberband gun, P90 or UZI?

P90.

Also for the reselling of your designs can I sell the product online or only localy. Was thinking places like Etsy

12x12 inch is big enough.
You can sell online as long as you print, sell and ship the products yourself. It is not allowed to commission third parties to print or ship the products, such as drop shipping.

Ah gotcha would I be allowed to use my Amazon as long as I do all the packing produceing and shipping my self? Reson I'm asking is that what I do all ready

Yes