Imprimez en lieu et place de l'indicateur de composition ! - Pour un nivellement facile des lits !

Woooow, can you make a adapter to ender 3v2 too?

Really was surprised by the sensitivity from this. It actually had me freaking out thinking my bed was majorly warped since I couldn't get rid of the high spot in the middle even with all 4 corners level. Then it occurred to me that it might be well within the range of "good enough" and checked and it was actually just +/- .05-.075mm which was plenty good for me. Wish I'd known about this a few weeks ago when I first got the printer.

hola he impreso este medidor , pero cuando lo saco de la cama sale la parte del centro que es la que deberia moverse, pegada al borde, lo he impreso en varias oportunidades y siempre es igual, sabes de alguna forma de solucionarlo, gracias

Ii had to turn off Detect thin walls in Prusa slicer to get the small lines to print

this is awesome but for some reason i am just not smart enough to figure out how to print it :( i have my layers set to 0.2 height but the strands still will not connect in the slicer i used all 3 of the ones you provided. if you could help it would be greatly appreciated.

бесполезная хуета с нулевой точностью (

Printed well first time, works, but not really sure how to use it properly.

Well the first one i made i was cutting the brim off and slipped and cut the little strands holding it on, the second one i printed with no brim but later dropped and the strands broke , i guess third time will be the charm and Im gonna design a box to hold it safely until I use it each time lol

sorry for the perhaps stupid question but it must be printed in petg or pla

Fantastic work

For some reason it never prints the connecting rods to the pin! I have tried every way of printing this but the three rods connecting to the pin do not print even though the other two connecting to the main body do!.

I'm using simplify3d as my slicer. Any suggestions?
Fantastic work though i'm really impressed with this.

@lolufe Search for dial indicator holder, there are lots of holders out there :)

Bonjour , je n'ai plus le systéme d'origine du capot metal pour le refroidissement du hotend , quelle solution pour avoir un de l'outil ? Merci d'avance .Philippe