Quatre séries de bases rondes - texture tech shanty

Designed for various scifi 6mm / 8mm scaled tabletop wargames, these bases have previously been released as separate kits.

Not counting the many details, these bases are about 2.25mm thick.

This simplified set contains the following items:
- 10x 25mm diameter round bases
- 10x 32mm diameter round bases
- 10x 40mm diameter round bases
- 10x 40mm diameter round flight stand bases
- 10x little detail bits to add on your bases
- 2x flight stand poles of 40mm long (ball end and pin end)
- 2x flight stand poles of 20mm long (ball end and pin end)
- 1x flight stand extender pole of 40mm long
- 1x conversion bit that allows your ball end pole to get a pin end
- 2x peg bits (either round end or ventilation bit) that can be inserted into the bases instead of the flight stand or extender bits.

Please do not share or sell these files (including prints and remixes) without my written permission.

NOTE: the 25mm and 32mm bases are just the flat versions, so without the holes/inserts.

Je recommande l'utilisation d'une imprimante à résine pour obtenir tous les détails, mais j'ai vu des gens utiliser FDM sur mes autres bases, donc cela peut aussi fonctionner.