FORD 351W COBRA v8 Engine 1/8 TO 1/25 SCALE

FORD 351W COBRA v8 Engine 1/8 TO 1/25 SCALE

Designed to be printed in both FDM (1/18 Scale and above) and Resin (SLA), this model is a must-have for enthusiasts looking to add the best, most detailed high-performance engine replica to their collection. This COBRA Ford Small Block features a DART block and High Port Racing Heads with 4 X WEBER 48 IDF Carbs, plus all the goodies to go fast. Ideal for a cool Hot Rod, Mustang, Ford Rod or GT40 special.

Choice of 4 valve covers (COBRA, FORD RACING , DART and NO LOGO) and 2 Distributors. The Water pump assembly is also offered in 2 Versions, complete (with alternator and pulleys etc.) or split up to separate parts. Extra MSD Coils included if the 2nd choice of distributor is used. The IDF 48 Webers is also offered in 2 versions, complete or separate stacks etc.

You need to print about 10 STL's to build the complete model. About 34 STL Files are included because you have options for FDM and Small or Large Scales etc. (Some STL Files included are options, making about 10 to print). Make's you an impressive and fun to build model, that can be used for display by itself, or fitted to your Pro Mod / Hot Rod build. A completely assembled STL file is included as to be used as a assembly guide. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer. Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. An fully assembled STL file is included to serve as an assembly guide. (See Scale Guide in PRINTER SETTINGS Below)

Please note that this is an advanced project requiring the printing of separate parts, similar to a model kit. You'll also need suitable-sized electric wire for spark plug wiring and pipes (Pipe STL files included).

Copyright for the FORD 351W COBRA v8 Engine design is retained by BuildandClick.com. This model is intended for personal use and is not to be redistributed in any form.

Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/18th Scale.
Prints good in RESIN, for some printers small details such as pipes have to be replaced by wire.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)