Arêtes de poisson arcane STL

PLEASE READ.

This is an advanced 3D print project with a lot of features built into it such as an articulating jaw, hollow body that runs the entire length of the launcher, able to be broken apart for travel with connector ts, and etc. There is a total of over 70 pieces to optimize for easy sanding and painting. You should only try to build this if you have some experience under your belt as well as enjoy puzzles.

You will need a variety of bolts, dowels, and pvc such as but not limited to 3/4 inch pvc for connecting, 1/4 inch. 1/2 inch, and 3/4 inch wooden dowels to connect certain parts, and 10-32 bolts from Home Depot to secure the rings and other parts as well as a 12 x 3 mm neodymium magnet to attach the head . The MOST IMPORTANT PART YOU WILL NEED. Is the Charlotte Pipe that makes up the main body of the launcher which I've included the link for here.

https://www.lowes.com/pd/Charlotte-Pipe-6-in-x-2-ft-Sewer-Main-PVC-Pipe/4757741

The length should measure about 386 mm and there is a part labeled PVC covers that you can use as a guide to mark your cut outs to allow for lights on the inside to shine through. There should be about an inch and a half sticking through the front to help with securing the main body to the head. The handle in the center can be used to carry the launcher if you secure it with a bolt and nut on the inside of the pvc.

My print settings of 3 walls and 5 percent infill works great for this. When assembling everything dry fit everything before you commit to gluing as tolerances may very depending on your printer.

Other than that, the entirety of the build is self explanatory as well as straight forward but if you have any questions or issues with the files you can message me on here or on my instagram @FabledQT where you can see more of my work and more photos of Fishbones.

If you're using my files for a commission for a different person you must buy a new file for every build.