MW-20 Bryar Blaster STL avec accessoires à distance

My interpretation of the new Bryar model recently seen in the Ghorman massacre.

Carefully designed to print with little to no s for clean and efficient prints.

I have provided all the parts labelled individually along with a Bambu 3MF file with the settings already dialed in for those that own a Bambu printer.

A small set of guidance pictures are provided along with the files to help better understand what parts go where.

The rotating chamber in the Bryar blaster can be combined with 8x2mm magnets on the inside to keep the rotation locked in place. Cutouts for these have already been modelled into the parts.

The attachments are designed to just slide into place, a clearance of 0.2mm has been used to ensure these parts can fit together without too much friction whilst also creating a secure connection.

Due to tolerances varying from printer to printer, If any of the 'Connector Blocks' seem too tight to the point they won't go in, please just give these a light sanding and they should be fine. All tests were ran through a Bambu printer and were all fine on my end. Tight fits are ideal to ensure the parts all line up correctly when gluing together.

FOR PERSONAL USE ONLY.

Any questions, feel free to ask.