Ir al contenido

1/14 Cargadora de orugas - Kitten 937

Main2.jpg 1/14 Cargadora de orugas - Kitten 937
03.jpg 1/14 Cargadora de orugas - Kitten 937
ripper.jpg 1/14 Cargadora de orugas - Kitten 937
multipurpose-bucket.jpg 1/14 Cargadora de orugas - Kitten 937
build-manual.jpg 1/14 Cargadora de orugas - Kitten 937
lift.jpg 1/14 Cargadora de orugas - Kitten 937
multi1.jpg 1/14 Cargadora de orugas - Kitten 937
01.jpg 1/14 Cargadora de orugas - Kitten 937
multi2.jpg 1/14 Cargadora de orugas - Kitten 937
suspension.jpg 1/14 Cargadora de orugas - Kitten 937
02.jpg 1/14 Cargadora de orugas - Kitten 937
multi3.jpg 1/14 Cargadora de orugas - Kitten 937
04.jpg 1/14 Cargadora de orugas - Kitten 937
05.jpg 1/14 Cargadora de orugas - Kitten 937
06.jpg 1/14 Cargadora de orugas - Kitten 937
07.jpg 1/14 Cargadora de orugas - Kitten 937
tracks.jpg 1/14 Cargadora de orugas - Kitten 937
Publicidad
Compartir
Añadir a
Make
Publicidad
?
Calidad de creación: 5/5 (1 voto)
Evaluación de los : imprimibilidad, utilidad, detalles, etc.
Licencia
Usos
Formato de diseño 3D
3 archivos (TXT y ZIP) Cerrar
  • ChangeLog v1.7.txt
  • Kitten 937 Metal Plated Update V1.01.zip
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Rockguard.stl
    • STL/Cabin/Cab Roof AC.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Belly Front.stl
    • STL/Chassis/Chassis Belly Middle.stl
    • STL/Chassis/Chassis Crossmember Tanks.stl
    • STL/Chassis/Chassis FR Arm Footsteps.stl
    • STL/Chassis/Chassis FR belly.stl
    • STL/Chassis/Chassis FR Middle.stl
    • STL/Chassis/Chassis FR motor Spacers.stl
    • STL/Chassis/Chassis FR Side.stl
    • STL/Chassis/Chassis FR SideM.stl
    • STL/Chassis/Chassis Main.stl
    • STL/Chassis/Chassis MainM.stl
    • STL/Chassis/Chassis Pendulum Mount.stl
    • STL/Chassis/Chassis Pendulum.stl
    • STL/Chassis/Chassis Rear Plate.stl
    • STL/Chassis/Chassis Rear Sides.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Hood2 Air Intake.stl
    • STL/Chassis/Hood2 Exhaust.stl
    • STL/Chassis/Hood2 mid.stl
    • STL/Chassis/Hood2 rear.stl
    • STL/Chassis/Hood2.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/LA Arm Railing.stl
    • STL/Lifting Arms/LA Arm.stl
    • STL/Lifting Arms/LA ArmM.stl
    • STL/Lifting Arms/LA BucketLink.stl
    • STL/Lifting Arms/LA Lifting Arms.stl
    • STL/Lifting Arms/LA Lifting Link.stl
    • STL/Lifting Arms/LA Pendulum Mount.stl
    • STL/Lifting Arms/LA Pendulum V2.stl
    • STL/Lifting Arms/LA Pendulum.stl
    • STL/Lifting Arms/LA SteelArm Mount.stl
    • STL/MultiBucket Variant2/Guard.stl
    • STL/MultiBucket Variant2/GuardV2.stl
    • STL/MultiBucket Variant2/R wall Mid A.stl
    • STL/MultiBucket Variant2/R wall Mid B.stl
    • STL/MultiBucket Variant2/R wall Side A.stl
    • STL/MultiBucket Variant2/R wall Side B.stl
    • STL/MultiBucket Variant2/Side A.stl
    • STL/MultiBucket Variant2/Side B.stl
    • STL/MultiBucket Variant2/Spacers.stl
    • STL/MultiBucket Variant2/Teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Running Gear/Drive Sprockets.stl
    • STL/Running Gear/motorCovers.stl
    • STL/Running Gear/RG inside.stl
    • STL/Running Gear/RG insideM.stl
    • STL/Running Gear/RG mid.stl
    • STL/Running Gear/RG midM.stl
    • STL/Running Gear/RG outside.stl
    • STL/Running Gear/RG outsideM.stl
    • STL/Running Gear/RG Sprocket Covers.stl
    • STL/Running Gear/RGfrontIdlers.stl
    • STL/Running Gear/RGtrackTensioners.stl
    • STL/Running Gear/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear/Roller Spacers Steel Chain.stl
    • STL/Running Gear/SteelChain Spacers.stl
    • Metal Plated Update Youtube.url
    • Metal files/DXF/v1 Arm.dxf
    • Metal files/DXF/v1 Belly Plate.dxf
    • Metal files/DXF/v1 Drive Sprocket.dxf
    • Metal files/DXF/v1 Lifting Cover.dxf
    • Metal files/DXF/v1 Main Chassis.dxf
    • Metal files/DXF/v1 Pendulum Link.dxf
    • Metal files/DXF/v1 Rear Plate.dxf
    • Metal files/DXF/v1 Roof Plate.dxf
    • Metal files/DXF/v1 Running Gear Inside.dxf
    • Metal files/DXF/v2 Lifting Motor Plate.dxf
    • Metal files/STEP/v1 Arm.stp
    • Metal files/STEP/v1 Belly Plate.stp
    • Metal files/STEP/v1 Drive Sprocket.stp
    • Metal files/STEP/v1 Lifting Cover.stp
    • Metal files/STEP/v1 Main Chassis.stp
    • Metal files/STEP/v1 Pendulum Link.stp
    • Metal files/STEP/v1 Rear Plate.stp
    • Metal files/STEP/v1 Roof Plate.stp
    • Metal files/STEP/v1 Running Gear Inside.stp
    • Metal files/STEP/v2 Lifting Motor Plate.stp
    • Metal files/DXF/v1 Running Gear Outside.dxf
    • Metal files/STEP/v1 Running Gear Outside.stp
  • Kitten 937v1.7 by burnie222rc.zip
    • HELP/What you need 3d printed Tracks.txt
    • HELP/What you need SCREWLIST.txt
    • HELP/What you need Steel Chains.txt
    • HELP/What you need.txt
    • STL/Buckets/Standard Bucket/Main.stl
    • STL/Buckets/Standard Bucket/teeth.stl
    • STL/Cabin/Cab AC.stl
    • STL/Cabin/Cab interior.stl
    • STL/Cabin/Cab Main.stl
    • STL/Cabin/Cab Roof side A.stl
    • STL/Cabin/Cab Roof side B.stl
    • STL/Cabin/Cab Roof.stl
    • STL/Chassis/Chassis Front Middle.stl
    • STL/Chassis/Chassis Front Motorside.stl
    • STL/Chassis/Chassis Front MotorsideM.stl
    • STL/Chassis/Chassis Lower Front.stl
    • STL/Chassis/Chassis Lower Mid Rear.stl
    • STL/Chassis/Chassis Lower Mid.stl
    • STL/Chassis/Chassis Lower Rear.stl
    • STL/Chassis/Chassis Main Side.stl
    • STL/Chassis/Chassis Main SideM.stl
    • STL/Chassis/Chassis Rear sides.stl
    • STL/Chassis/Chassis Top Cab Brace.stl
    • STL/Chassis/Cylinder Shields.stl
    • STL/Chassis/Front Pendulum Mount.stl
    • STL/Chassis/Hood Air Intake.stl
    • STL/Chassis/Hood Exhaust.stl
    • STL/Chassis/Hood Grille.stl
    • STL/Chassis/Hood.stl
    • STL/Chassis/Motor Spacers.stl
    • STL/Lifting Arms/Arm footsteps.stl
    • STL/Lifting Arms/BucketLink v1.stl
    • STL/Lifting Arms/Lifting Arms v1.stl
    • STL/Lifting Arms/lifting link v1.stl
    • STL/Lifting Arms/Pendulum Mount v1.stl
    • STL/Lifting Arms/Pendulum V1.stl
    • STL/Running Gear V2/RGfrontIdlers.stl
    • STL/Running Gear V2/RGtrackTensioners.stl
    • STL/Running Gear V2/Roller Spacers 3d Printed Tracks.stl
    • STL/Running Gear V2/Roller Spacers Steel Chain.stl
    • STL/Running Gear V2/SteelChain Spacers.stl
    • STL/Running Gear V2/TrackPad.stl
    • STL/Running Gear V2/V2RGinside.stl
    • STL/Running Gear V2/V2RGinsideM.stl
    • STL/Running Gear V2/V2RGmid.stl
    • STL/Running Gear V2/V2RGmidM.stl
    • STL/Running Gear V2/V2RGoutside.stl
    • STL/Running Gear V2/V2RGoutsideCover.stl
    • STL/Running Gear V2/V2RGoutsideCoverM.stl
    • STL/Running Gear V2/V2RGoutsideM.stl
    • STL/Window Template.stl
    • Build Manual/Kitten 937 build Series Youtube.url
    • STL/Running Gear V2/steelChain Trackpad.stl
    • STL/Running Gear V2/steelChain Tracks x10.stl
    • STL/Running Gear V2/Drivesprocket B.stl
    • STL/Running Gear V2/Drivesprocket.stl
    • STL/Running Gear V2/motorCovers.stl
    • Build Manual/Ripper/Ripper what you need.txt
    • STL/Ripper/STL/Ripper Blades.stl
    • STL/Ripper/STL/Ripper Links.stl
    • STL/Ripper/STL/Ripper Rear Chassis.stl
    • STL/Ripper/STL/Ripper Spacers.stl
    • STL/Ripper/STL/Ripper.stl
    • STL/Buckets/Multibucket/Actuator link.txt
    • STL/Buckets/Multibucket/sides.stl
    • STL/Buckets/Multibucket/Spacers.stl
    • STL/Buckets/Multibucket/teeth.stl
    • STL/Ripper/Ripper what you need.txt
    • STL/Buckets/Multibucket/rWallMidDrvV2.stl
    • STL/Buckets/Multibucket/rWallMidPasV2.stl
    • STL/Buckets/Multibucket/rWallOutDrvV2.stl
    • STL/Buckets/Multibucket/rWallOutPasV2.stl
    • STL/Lifting Arms/ArmV2 A.stl
    • STL/Lifting Arms/ArmV2 Ains.stl
    • STL/Lifting Arms/ArmV2 B.stl
    • STL/Lifting Arms/ArmV2 Bins.stl
    • STL/Lifting Arms/ArmV2 Railing.stl
    • STL/Chassis/Front pendulum V2.stl

Más sobre los formatos
Última actualización 2025-03-26 13:33
Fecha de publicación 2024-01-02 04:40
Número de diseño 1681608
burnie222

burnie222

Cuenta certificada
  • o
¿Tienes algún defecto en este diseño? Advertir de una problema.

Info de la plantilla

Descripción del modelo 3D

EDIT:
26th March 2025 - Fixed a faulty DXF file named "v1 Running Gear Outside.dxf" , and I also fixed the STEP version for this file incase something was wrong with that too.
Metal Plated Update V1.01 to get this update!
4th March 2025 -
Metal Plated Kitten 937 update !
This huge update will allow you to create a metal plated tracked loader, the metal plates will allow you to stiffen up the chassis and increase durability alot.
Files for cutting the metal plates are included, New parts to fit the Kitten 937 like Rock guard shield infront of windshield, New style enginehood, and another 4in1 bucket variant!
the "Kitten 937 Metal Plated Update.zip" to get the files.

23rd May 2024 - Made a stronger Front Pendulum. Find it in the Chassis folder.
9th May 2024 - Fixed a mistake in the design of the Lifting Arms, the old arms broke around a screwmount, this update adds New Arms that are much stronger and durable.
I also fixed a problem with the Multifunction Bucket rubbing into the tracks. You will have to print the new bucket parts in order to fix this problem. V1.6 to get the update.
10th April 2024 - Fixed a mistake in Buildmanual Phase 1 page 16. It said to use 34 steel chain Tracklinks, when the correct number is apparantly 32. V 1.5d to get the update.
16th February 2024 - fixed a big typo in the "What you need Steel Chains.txt" file and updated info in buildmanual about how many trackpads are needed for steel chains.
V1.5c to get the update.
29th January 2024 - Added files for a Multi-Purpose Bucket. V1.5 to get them.
25th January 2024 - Added files for a Ripper. V1.4 to get them.
9th January 2024 - Added a motorcover for the Drivemotors. The file is called motorCovers.stl and is in the Running Gear folder.
4th January 2024 - Fixed a small issue with the Drivesprocket files, the holes were too small.

Build yourself a fully electric hobbygrade Tracked Loader!
1:14th scale.

Printable on a 22x22 buildplate!

Full partslist with links to all the parts you need to get started!
An overview of all the screws needed is also included.

-Choose between 3d printed tracks, or steel chain tracks!

-Choose between fully 3d printed chassis, or Steel plated chassis!

58 page detailed build manual AND a youtube build series to provide as much information and help as I possibly can!

5840-555 WormGear motors for trackdrives, extremely powerful and durable motors with 8mm axle shaft!

5840-31zy Dual Shaft motor for the Lifting mechanism, superstrong motor that will lift any load in your bucket 30,5 cm off the ground!

Two 12v actuators makes sure the bucket get loaded and emptied in no time!

Runs off a 3s 11,1v LiPo battery.

This has been a very big challenge for me to make availiable for everyone, I have tried my best at making all the parts as friendly as I possibly can.

You can watch the entire 3d Printed plastic build on youtube, and see how I built mine here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2LvN1x7bYKm5vPzC8feO9Pm

And you can see the entire Steel Plated build on youtube here:
https://www.youtube.com/playlist?list=PLdh4mhBIIM2KGeXY7Em4nA015HgUZ1fVg

This is an entirely 3d printed plastic build, so there is No need for any steel-work.

You will need alot of different screws and hardware, list included.

IMPORTANT NOTICE:
I do not show you how to setup your controller or how to put the electronics together in the guide. But there is a detailed video of how to do it here:
https://youtu.be/hoJ6KEgcggk

Ajustes de fabricación

al menos 1,2 mm de espesor en las capas superior e inferior, 3 paredes, 30% de relleno

Categorías

Casa

Palabras-clave

Publicidad

Página traducida por traducción automática. Ver la versión original.

¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 4 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 3 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloqueador de anuncios.
  • DONACIÓN: Hacer una donación a través de Ko-Fi 💜.
  • BOCA A BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!

Compartir y descargar en Cults3D garantiza que los diseños permanezcan en manos de la comunidad de creadores. Y no en las de los gigantes de la impresión 3D o del software que poseen las plataformas competidoras y que explotan los diseños para sus propios intereses comerciales.

Cults3D es un sitio independiente y autofinanciado que no rinde cuentas a ningún inversor o marca. Casi todos los ingresos del sitio se devuelven a los creadores de la plataforma*. El contenido publicado en el sitio sirve *únicamente a los intereses de sus autores** y no a los de las marcas de impresoras 3D que también desean controlar el mercado del modelismo 3D.