Print in Place Engine Benchmark
Advertising
- 509 views
- 1 like
- 0 comments
| Publication date | 2020-12-31 at 13:06 |
|---|
Maker
3D Model
Advertising
Make’s description
Its all about the right retract settings (and good quality filament)! On the Ender 2 with the stock bowden Extruder my best retract settings for this hard to print object are:
8 mm at 100 mm/s, combing for all, minimum extracted filament 0mm, minimum travel 0.5 mm (cura 15 - the newer versions just confuse me and never got better results!)
- Resolution: 0.15 mm
- Temperature: 200 ℃
- Infill: 25 %
- Speed: 45 mm/s
You have a problem with this Make? Report a problem.
Add a comment