Skip to content

"The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip

image0.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image1.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image2.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image5.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image13.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image6.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
IMG_2715.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image7.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image8.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image9.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image10.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image11.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
image12.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
IMG_3583.jpeg "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
THE DRAKE 12 V3 Ejector Plunger.stl "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip
The Drake 12 V3 (RESIN).stl "The Drake 12" VSR10 Airsoft Shotgun Shell Adapter/Angled Foregrip

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
8 files (STL) Close
  • THE DRAKE 12 V2-V3 Magazine Release Button.stl
  • THE DRAKE 12 V3 Ejector Plunger.stl
  • THE DRAKE 12 V3 Feed Nozzle.stl
  • The Drake 12 V1.stl
  • The Drake 12 V2.stl
  • The Drake 12 V3 (RESIN).stl
  • The Drake 12 V3 Magazine Release (RESIN).stl
  • The Drake 12 V3.stl

Learn more about the formats
Last update 2024-07-13 at 13:48
Publication date 2024-06-06 at 03:20
Design number 2048024
210Designs

210Designs

Issue with this design? Report a problem.

4 comments

Add a comment

4 comments

Brutaly
Brutaly

Printed it and it fits nicely.

But i doesnt feed.

If i insert a shell, with the adapter not attached, the bb comes out as they should (all over the floor) so the nozzle works and the bb can move freely thru the adapter.

But when i put the adapter in the rifle nothing is fed.

The gun works flawless with standard magazine and also with an m4 adapter i got.

Advice please!

210Designs
210Designs

Hmm I’m not exactly sure what’s going on there, the only thing I can guess is that the feed hole inside the gun and the adapter aren’t lining up perfectly for some reason, maybe try opening up the adapters feed hole a bit by drilling it or sanding it? Without seeing it in person it’s hard to say.
marvel811
marvel811

any advice on the shell ejector as i have to push the shell in quite hard to get it to release the bbs

210Designs
210Designs

Hey, sorry I forgot to reply to this when I read it. Are you having a problem with the feeding or the ejection of the shells?
Elekes
Elekes

Hello, nice design and very very well made.

I have a small request, can you please explain a little how to install the ejection part on v3 ?

I can't figure out how to install it.

Thank you so much for your time and effort put in this project.

210Designs
210Designs

Sure thing 👍🏼 once you have the springs for the ejectors, you place them in the top left and bottom right holes (I’d use a dab of super glue to keep the springs from falling out during the rest of the assembly) then you place the plungers in the top left and bottom right holes of the replaceable nozzle and once it’s all aligned, screw it in place. I’ll post an extra picture as sort of a diagram to show the parts in order. I hope this helps!

  • 1 like
Macka3D
Macka3D

I have this on the resin printer now. The new versions look epic and looking forward to the result. I love how you have made a replaceable nozzle, I can try different designs. I'm going to try a bb retaining O-ring and see how that works. Top work and easily the best looking shell adapter I've come across.

  • 2 likes
210Designs
210Designs

I appreciate it! Thank you for the TM shell measurements and the ejector idea! Let me know if you run across any issues that I can fix 👍🏼

  • 1 like

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.