Panther Ausf.G Rear Details - Mid Version - Battle Worn FM25-016

BASED ON 3D SCAN DATA!
Scale: 1/35 Highly quality scale model detail set. Digital 3D printable set (STL-Format)

Included:
Battle Worn:

-Exhaust system
- 15to. tank jack
- rear stowage bins
- rear details (column light, reflector, main engine hatch)

^ed files included for all parts above

3D PRINT INFORMATION:

Use a sharp hobby blade for careful removal.
Print layer 0.01-0.02mm for smaller parts, 0.035mm for large parts

In case of the resin being still soft and sticky, lay the part into the sunlight for a few hours. (remove structure beforehand! gently heat up the part with a hairdryer to make soften the s)

Use a side cutter to detach the structure from the model.(use a hairdryer to heat up the part gently to prevent part from breaking!)
Bumps and remains of the can easily be filed off. Gaps can be filled with putty.
Wash the piece with soap water.
The piece can be prepared with usual primer

LICENSE INFORMATION:

You may only use the files provided for personal projects.
The distribution of the files is not permitted in any form f.e.: in digital or
3d printed form; the same applies to the sale of the files or the printed models, or other forms of distribution f.e.: resin casting.

If you are interested in the conditions for a commercial license, feel free to me.

Copyright Faustus Models
by Tom Theunissen
© Faustus Models 2025

Print layer 0.02-0.04mm for best results.
SLA-3D print only!