Panther A Engine Details Type A FM25-026

BASED ON 3D SCAN DATA!
Scale: 1/35 Highly quality scale model detail set. Digital 3D printable set (STL-Format)

---

FM25-026 Panther A Engine Details Type A

Panther Engine Deck details including engine cooling grids and radiators, includes
fully ed pieces with realistic cast textures; print in place mesh covers included!
Fits all common Panther A 1/35 Plastic Scale Model Kits

---

INCLUDED PIECES:

► Main Pieces

FM25-026 Panther A Engine Details Type A - EASY USE v1

FM25-026 Cooling Grids INDIV.PIECES
FM25-026 Detail Parts INDIV.PIECES
FM25-026 Radiators INDIV.PIECES
Panther Ausf.A Antenna

► Single Pieces

2m Antenna Panther A
Air Intake Hole Screened Flange
Armor Cap for Air Intake Panther A v2
Cooling Grid Mesh Panther-A-D No.1
Cooling Grid Mesh Panther-A-D No.2
Cooling Grid Panther-A-D No.1 w.Mesh

All parts come as ed and uned versions

---

3D PRINT INFORMATION:

► Printing Specs

Layer Height: 0,040 (0,02-0,04)
Exposure Time: 2,6 sec
Bottom Exposure Time: 37 sec
Rest Time After Release: 1 sec
Rest Time After Retract: 1 sec
Anti-Aliasing: None

(for Mars 4 Ultra - results may varry on different printers)

► Working with the Parts

Use a sharp hobby blade for careful removal.
Print layer 0.01-0.02mm for smaller parts, 0.035mm for large parts

In case of the resin being still soft and sticky, lay the part into the sunlight for a few hours.
(remove structure beforehand! gently heat up the part with a hairdryer to make soften the s)

Use a side cutter to detach the structure from the model.(use a hairdryer to heat up the part gently
to prevent part from breaking!)
Bumps and remains of the can easily be filed off. Gaps can be filled with putty.
Wash the piece with soap water.
The piece can be prepared with usual primer.

---

LICENSE INFORMATION:

You may only use the files provided for personal projects.
The distribution of the files is not permitted in any form f.e.: in digital or
3d printed form; the same applies to the sale of the files or the printed models,
or other forms of distribution f.e.: resin casting.

If you are interested in the conditions for a commercial license, feel free to me.

Copyright Faustus Models
by Tom Theunissen
© Faustus Models 2025

► Printing Specs

Layer Height: 0,040 (0,02-0,04)
Exposure Time: 2,6 sec
Bottom Exposure Time: 37 sec
Rest Time After Release: 1 sec
Rest Time After Retract: 1 sec
Anti-Aliasing: None

(for Mars 4 Ultra - results may varry on different printers)