Skip to content

Lockheed P-38 Lightning

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Lockheed P38 Lightning Zip.zip
    • Instructions/Instructions.rtf
    • Instructions/Print settings.rtf
    • STL/Canopy assembly jig (STL).stl
    • STL/Lockheed P38 Lightning sprue format (STL).stl
    • STL/No Sprue Format/Canopy left (STL).stl
    • STL/No Sprue Format/Canopy right (STL).stl
    • STL/No Sprue Format/Fuselage left (STL).stl
    • STL/No Sprue Format/Fuselage right (STL).stl
    • STL/No Sprue Format/Horizontal stabilizer (STL).stl
    • STL/No Sprue Format/Instrument (STL).stl
    • STL/No Sprue Format/Name plate (STL).stl
    • STL/No Sprue Format/Propeller assembly left (STL).stl
    • STL/No Sprue Format/Propeller assembly right (STL).stl
    • STL/No Sprue Format/Scale plate (STL).stl
    • STL/No Sprue Format/Seat (STL).stl
    • STL/No Sprue Format/Tail boom with vertical stabilizer left (STL).stl
    • STL/No Sprue Format/Tail boom with vertical stabilizer right (STL).stl
    • STL/No Sprue Format/Wheel main assembly left (STL).stl
    • STL/No Sprue Format/Wheel main assembly right (STL).stl
    • STL/No Sprue Format/Wheel nose assembly (STL).stl
    • STL/No Sprue Format/Wing left (STL).stl
    • STL/No Sprue Format/Wing right (STL).stl
    • STL/Stand (STL).stl
    • STL/Test Prints/Bridging test (STL).stl
    • STL/Test Prints/Perforated line test (STL).stl
    • STL/Test Prints/Slot and key test (STL).stl
    • STL/Test Prints/Surface quality test (STL).stl

Learn more about the formats
Publication date 2024-05-01 at 07:32
Design number 1962223
aquilo3dp

aquilo3dp

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Instruction:
This product requires assembly after printing.
Assembly requires a few basic tools: razor blade, pliers, drill, sanding paper, superglue. Some of these tools might not be necessary, like the drill and sanding paper, depending on your print quality.
Assembly might not be straight forward and requires your initiative to make parts fit.
Consider printing test prints before final print. This will indicate the probability of a failed or successful print. This will also indicate how easily or laboriously parts will fit during assembly.
Slot and key should fit into each other. If they do not fit then reduce your extruder flow rate. A tight fit is also okay. Reducing flow might result in small gaps in surface quality print along the perimeters but that is okay. This will help parts fit into each other without too much effort in making them fit.
The perforated lines are the most likely to fail during printing of the first layer. If you are having problems with this then reduce all perimeter print speed settings with at least 50%. Or during printing manually reduce the main print speed setting with at least 50% only during the first layer. During printing of the first layer, if your printer first prints all the perimeters like in the included photo example, you may reset print speed to default for infill during the first layer. Don't worry about speed settings after the first layer is finished.
For further assembly instructions refer to photos.
This product is fragile due to its design to save on printing time and material usage. Handle with care.
Zip folder includes:
Sprue (or grid) format.
No sprue format (every part has a separate STL).
Stand.
Canopy assembly jig.
Instructions.
Photos.
The STL's included in this Zip folder are licensed under private use, but you may reproduce your print (reprint) and sell for your profit.

3D printing settings

Print settings:
Layer height - 0.3mm.
First layer height - 0.3mm.
Seam position - random.
Infill - 10%.
Print - off.
Brim - off.

Categories

Various

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.